034 Motorsports Street Density Motor Mounts

[Sauci]

N/a

[AudiTFSI3o3]

pm'ed

[Sauci]

Just got the car back with mounts removed. Here are pictures of the actual mounts.

[Sauci]

Bump

[Hugonzalez01]

So a while back my OEM motor mounts went out and I purchased the 034 motor mount replacements and had them installed. However, I accidentally ordered the 65 durameter version which is for manual cars and I have an automatic so there is a little more NVH than I would prefer. These have actually gotten better as I've put a few more miles on them and from what I understand it takes almost 5k miles before they reach the level of softness that is intend. Currently there is just some vibration at idle like what you would get with a car that has tons of power, so nothing really bad. But, I've been toying around with the idea of selling the car so I need to have stuff like this at OEM levels so I've decided to swap them out with OEM mounts and am selling the 034 mounts.

These were professionally installed on 5/18/16 at 88,649 miles and currently the car has 89,734, so just over 1k miles have been put on them.

They will be professionally removed by the same shop that installed them the weekend after next so I can have them shipped out that following Monday (10/24).

These sell for 195 each plus shipping. Looking for $300 shipped to the lower 48.

The attached picture is a stock photo. Once they are removed I can add real pictures but as these are so new, they should look pretty much exactly like the stock picture.

Link to 034 Product Page
https://store.034motorsport.com/moto...-2-0-tfsi.html

If they are still available send me a Pm.


Sent from my iPhone using Tapatalk

[SwankP3RF3ct10n]

Hey, you linked the 2.0L B8 mounts... are they for your A5 or are these for the S4? Can you provide the exact part number off of them or your invoice please?

[b8s4me]

Hey, you linked the 2.0L B8 mounts... are they for your A5 or are these for the S4? Can you provide the exact part number off of them or your invoice please?

Almost positive those mounts are used in A4, S4, S5 B8's

[SwankP3RF3ct10n]

Almost positive those mounts are used in A4, S4, S5 B8's

It's two different densities. First he said he bought the wrong ones and he bought the harder ones and then he posts links to the weaker/softer A4 2.0L ones. I'm just trying to figure out what the due actually is trying to sell because I'd personally would want the ones made for the 3.0L (i.e. the denser mounts).

[K2R1D3R]

Still have these? I'll buy

[Sauci]

There was confusion on my end as on the 034 page for the S4 mounts it also lists the A5 but I didn't realize it was referring to the v6 A5. These are for the 2.0t but are the denser version

[Sauci]

Still have these? I'll buy

I cannot confirm these will fit on the S4(see previous post) but if you can confirm that they will work, yes they are still for sale.

[SwankP3RF3ct10n]

There was confusion on my end as on the 034 page for the S4 mounts it also lists the A5 but I didn't realize it was referring to the v6 A5. These are for the 2.0t but are the denser version

What you're saying doesn't make sense. There are only two versions one for the S4 larger motors and one for the A4 smaller motors. The 2.0 ones are less dense than the other ones, so what you're saying is contradictory. What's the exact part number on your original order or invoice. Let's go with that as that will tell us all EXACTLT what you have.

[Sauci]

What you're saying doesn't make sense. There are only two versions one for the S4 larger motors and one for the A4 smaller motors. The 2.0 ones are less dense than the other ones, so what you're saying is contradictory. What's the exact part number on your original order or invoice. Let's go with that as that will tell us all EXACTLT what you have.

Do your homework before you start spouting off wrong information on my thread and coming in hot. The 65 durometer rubber mounts were the first designed for the A4 platform.

http://www.audizine.com/forum/showth...8-Audi-A4!-***

There was complaints of the NVH some buyers experienced with automatic transmissions so they developed a 50 durometer version as well.

I have the 65 durometer as stated in the OP

[SwankP3RF3ct10n]

Do your homework before you start spouting off wrong information on my thread and coming in hot. The 65 durometer rubber mounts were the first designed for the A4 platform.

http://www.audizine.com/forum/showth...8-Audi-A4!-***

There was complaints of the NVH some buyers experienced with automatic transmissions so they developed a 50 durometer version as well.

I have the 65 durometer as stated in the OP

I like how you edited the OP and all the mistakes you had in it. You said you had the harder ones and the linked the 2.0L weak ones and said they are like that. 034's site has two listings for these mounts. One soft and one hard. What you linked is not what you have and you still haven't posted exactly what you bought off your invoice. All I'm saying is mistakes can be made, like obviously you did, so before someone buys the 2.0L mounts thinking they're getting the harder ones because that's what you said, we'd like a little bit of concrete info. I was actually thinking of buying them off you, but not if I can't get a straight answer as to what you actually have based on actual order detail. Shit, at this point, I wouldn't buy them out of principal, but glwts.

[Sauci]

I like how you edited the OP and all the mistakes you had in it. You said you had the harder ones and the linked the 2.0L weak ones and said they are like that. 034's site has two listings for these mounts. One soft and one hard. What you linked is not what you have and you still haven't posted exactly what you bought off your invoice. All I'm saying is mistakes can be made, like obviously you did, so before someone buys the 2.0L mounts thinking they're getting the harder ones because that's what you said, we'd like a little bit of concrete info. I was actually thinking of buying them off you, but not if I can't get a straight answer as to what you actually have based on actual order detail. Shit, at this point, I wouldn't buy them out of principal, but glwts.

I wouldn't have sold them to you 3 posts ago... and they're the fucking harder ones like I said.