Any interest in a used RA4 flywheel and S4 clutch with 2mi of use??

**MrSnickelsnizer** · 10-10-2016 09:00 AM

As the above title says. I have a RA4 flywheel, clutch alignment tool, maybe flywheel bolts, and a S4 clutch (LUK brand) with 2mi of use on it.
I am not sure what a good asking price is. Reved super damn quick with it. Shifts at speed were way faster. I removed because I think the flywheel needs machining? Can't really remember it has been so long. I do know I have step height information for the flywheel I got from ECS Tuning a while back. Machine shop needed it and I have since forgotten to take it back to them. So I don't want it. It has been sitting for more than a year. I bought the Clutch and a LUK Clutch Kit brand new. The LUK Clutch is a replacement. Have receipts for both. I can add photos later if there is any interest. Pictures are just going to show a used clutch... but pictures are awesome I guess. The kit cost me 600$. The new replacement clutch was about 150$. Machining is about 50$.

**Turbo_B5** · 10-10-2016 11:52 AM

Originally Posted by MrSnickelsnizer

As the above title says. I have a RA4 flywheel, clutch alignment tool, maybe flywheel bolts, and a S4 clutch (LUK brand) with 2mi of use on it.
I am not sure what a good asking price is. Reved super damn quick with it. Shifts at speed were way faster. I removed because I think the flywheel needs machining? Can't really remember it has been so long. I do know I have step height information for the flywheel I got from ECS Tuning a while back. Machine shop needed it and I have since forgotten to take it back to them. So I don't want it. It has been sitting for more than a year. I bought the Clutch and a LUK Clutch Kit brand new. The LUK Clutch is a replacement. Have receipts for both. I can add photos later if there is any interest. Pictures are just going to show a used clutch... but pictures are awesome I guess. The kit cost me 600$. The new replacement clutch was about 150$. Machining is about 50$. So throw me an offer if interested.

so flywheel has never been machined before? how aboot 200canadian pesos eh?

**MrSnickelsnizer** · 10-11-2016 09:51 AM

I was feeling about $300 for all of it. Not looking to seperate. Will have useless clutch step up gathering dust.

**MrSnickelsnizer** · 11-08-2016 12:33 PM

up

**MetalMan** · 11-08-2016 12:42 PM

How many miles are on the FW?

**gmack1129** · 11-08-2016 01:09 PM

Setup for a 1.8t?

**Davdraco1** · 11-08-2016 08:19 PM

300$ a good deal.

**Believer** · 11-08-2016 08:50 PM

What made you believe the flywheel needed machining with only 2 mi of use?

**MetalMan** · 11-09-2016 10:09 AM

Originally Posted by Believer

What made you believe the flywheel needed machining with only 2 mi of use?

If I read correctly, it's the clutch kit which only has 2 miles on it, and the FW was used with a different clutch kit previously. Hence my question several posts up (how many miles the FW has).

**Believer** · 11-09-2016 10:46 AM

Originally Posted by MetalMan

If I read correctly, it's the clutch kit which only has 2 miles on it, and the FW was used with a different clutch kit previously. Hence my question several posts up (how many miles the FW has).

Good point, didn't read it that way and missed your question also. Does machining a flywheel effect anything in terms of height of the surface?

**MrSnickelsnizer** · 11-09-2016 04:14 PM

Flywheel had I think 20,000 - 30,000ish mi. Can put up an exact # later, but it is in that ball park. The machining of the flywheel barely affects the engagement of the setup. In fact you would never be able to tell if done correctly. That is reliant on how precise the machine shop can keep the tolerances to the step height of 7.5mm +/- 0.1mm. But yes theoretically the flywheel loses overall height. I explained my engagement issues to several guys and they all said machine the flywheel and get new clutch kit. Clutch kit was put on an S4 that blew up in 2mi. So yeah. I magically gained a new clutch kit for the RA4 that I lost interest in. Moved on to better and greater things.

**Nossty1** · 11-14-2016 04:21 PM

Please PM if it falls through. I am interested as well.

**MrSnickelsnizer** · 11-21-2016 12:45 PM

At this point guys I have lost track of who was next in line but original guy hasn't followed through. So lets start over. If serious I am asking 300$ shipped, in the continental USA. Working Paypal preferred.