034 Street Density Trans Mount

[reno808]

I am about to install the mount and i can not find instructions anywhere. I was wondering where does the spacer and if i reuse the stock center bolt.
thanks for your help

[vvenom800tt]

Make sure the spacer is on the bottom of the mount, first thing the bolt goes through. Or else youll have a hole in your transmission like i did. Thank jb weld though. holding up still 2 years later

[reno808]

Make sure the spacer is on the bottom of the mount, first thing the bolt goes through. Or else youll have a hole in your transmission like i did. Thank jb weld though. holding up still 2 years later

lol thanks man!!... good to hear tho.

[krewbrew]

See http://www.audizine.com/forum/showth...nt-install-DIY. I ended up cutting the bottom of the center bolt off with an angle grinder and jb welding the new nut to the top bracket, as others have mentioned in that thread. Bit of a pain, but the result is good in that driveline is nice and tight.

[Rulty]

Just installed mine a week or so ago. That long Alan bolt they have you is your new center bolt, put the spacer on that then slide it up through your mount and you are good to go!

[reno808]

Just installed mine a week or so ago. That long Alan bolt they have you is your new center bolt, put the spacer on that then slide it up through your mount and you are good to go!

Yup exactly... Thanks guys for your help. All installed !!!!