Anti Rattle Clips

**penogg** · 09-29-2016 09:22 AM

Hello all, I have an '08 A6 S-line 4.2 and was thinking of installing these:

Audi part number: 8E0615269

ECS: https://www.ecstuning.com/Search/8e0615269/ES1597774/

Ebay: http://www.ebay.com/itm/Audi-S4-A4-S...cAAOSw6oBXEq4f

Has anyone installed these Anti rattle plates on their A6's, PIC, Advice??
K

**hilmar2k** · 09-29-2016 12:03 PM

First of all, why? Secondly, not sure they are going to fit, since they are only listed for A4s and S4s. But seriously, why?

**penogg** · 09-29-2016 01:43 PM

Ok, what do you suggest. obviously you think Audi is in poor taste labeling the calipers on the S and R sires....

**hilmar2k** · 09-29-2016 02:05 PM

If you really feel the need to label your calipers, how about painting them and adding stickers? At least that way you could label them correctly.

**penogg** · 09-29-2016 03:27 PM

Ok, I am open for examples :-)

**SinCityA6** · 09-29-2016 04:47 PM

Our calipers are hard to put stickers on as the rattle clip cutout takes up a lot of the face of the caliper. I have seen the 4 rings sticker placed on the caliper above the rattle clip.

Search is our friend:

http://www.audizine.com/forum/showth...liper+stickers

**penogg** · 09-29-2016 05:17 PM

I did this on my AR:

https://drive.google.com/open?id=0B6...XdIdkYtRU9qeHc

**penogg** · 09-29-2016 05:20 PM

..And there's this on Ebay:

http://www.ebay.com/itm/162201882824...%3AMEBIDX%3AIT

**D's Avant** · 09-30-2016 07:49 AM

Originally Posted by penogg

Hello all, I have an '08 A6 S-line 4.2 and was thinking of installing these:

Audi part number: 8E0615269

ECS: https://www.ecstuning.com/Search/8e0615269/ES1597774/

Ebay: http://www.ebay.com/itm/Audi-S4-A4-S...cAAOSw6oBXEq4f

Has anyone installed these Anti rattle plates on their A6's, PIC, Advice??
K

I have the black ones on mine with a "R" on them. My calipers are painted black and they look a bit cleaner. Need to find a S-Line/rings sticker or just paint over the "R" and have them all black. This is a Fall project.