Audizine - An Automotive Enthusiast Community

Results 1 to 12 of 12
  1. #1
    Veteran Member Three Rings
    Join Date
    Feb 01 2016
    AZ Member #
    368073
    My Garage
    09 A6 3.0T (Sold), 11 Cooper ALL4 S, 2013 S5
    Location
    Lowell, MA

    For those that have/had replica peelers....

    Guest-only advertisement. Register or Log In now!
    I recently had a set fitted and these came with small sets of Audi rings to attach to centre cap.

    The tyre centre declined to fit these saying they had seen them break before.

    I tried one and sure enough I broke it.

    So I'm down to 5 good ones and 1 broken one. Before I try again, has anyone had any luck or tips for this?




    Sent from my iPhone using Audizine mobile app
    2013 S5, B&O, Sports Diff, Nav Plus, Carbon inlays, Akebono, APR Stage 2, Dual Pulley, DSG Tune, APR intake and back pipe. KW HAS. Variant 20x10, Carbon Imports rear spoiler, RS Grill, Passport 9500i and night surveillance by Blackvue :) Ultracharger and Intercooler, ECS X-pipe

  2. #2
    Veteran Member Four Rings rayray's Avatar
    Join Date
    Sep 17 2010
    AZ Member #
    64245
    My Garage
    ‘19 S5/SB; ‘17 Q7
    Location
    Massachusetts

    When I had my C6 with peelers, I had no problem removing them and installing them. Never had one break either. I just used a small plastic trim tool to remove and gentle pressure to install.
    2019 S5 Sportback Prestige | Daytona Gray Pearl on Black | Black Optics | S Sport Pkg
    2017 Q7 3.0T Prestige | Ink Blue Metallic on Nougat Brown | Driver Assistance Pkg | 21"RS Wheels | Towing Pkg

  3. #3
    Veteran Member Three Rings
    Join Date
    Feb 01 2016
    AZ Member #
    368073
    My Garage
    09 A6 3.0T (Sold), 11 Cooper ALL4 S, 2013 S5
    Location
    Lowell, MA

    Quote Originally Posted by rayray View Post
    When I had my C6 with peelers, I had no problem removing them and installing them. Never had one break either. I just used a small plastic trim tool to remove and gentle pressure to install.
    Granted I have only tried on one wheel yet, but no amount of gentle pressure seemed to help it in and then of course the tab broke.

  4. #4
    Veteran Member Four Rings rayray's Avatar
    Join Date
    Sep 17 2010
    AZ Member #
    64245
    My Garage
    ‘19 S5/SB; ‘17 Q7
    Location
    Massachusetts

    Maybe a little bit of silicone lubricant might help. I really had no issues with swapping it out.
    2019 S5 Sportback Prestige | Daytona Gray Pearl on Black | Black Optics | S Sport Pkg
    2017 Q7 3.0T Prestige | Ink Blue Metallic on Nougat Brown | Driver Assistance Pkg | 21"RS Wheels | Towing Pkg

  5. #5
    Veteran Member Three Rings
    Join Date
    Feb 01 2016
    AZ Member #
    368073
    My Garage
    09 A6 3.0T (Sold), 11 Cooper ALL4 S, 2013 S5
    Location
    Lowell, MA

    Quote Originally Posted by rayray View Post
    Maybe a little bit of silicone lubricant might help. I really had no issues with swapping it out.
    I was thinking that might be worth a shot or a gentle movement with a screwdriver to make sure the tabs will go in, it was solid.

  6. #6
    Veteran Member Four Rings 2010A6's Avatar
    Join Date
    Mar 10 2015
    AZ Member #
    319655
    My Garage
    2017 Jeep Cherokee; 2018 S3 Nano Gray
    Location
    Albany, NY

    Might be too risky but maybe a light LIGHT sandpaper of the slits? Just enough that light pressure pops it in but it still stays in place?


    Sent from my iPhone using Tapatalk
    -------------------------
    Current: 2018 Audi S3 2.0T Nano Gray / Magma Red
    Past: 2010 Audi A6 3.0T Midmight Blue / Pistachio Beige

  7. #7
    Veteran Member Three Rings
    Join Date
    Feb 01 2016
    AZ Member #
    368073
    My Garage
    09 A6 3.0T (Sold), 11 Cooper ALL4 S, 2013 S5
    Location
    Lowell, MA

    I lubed and gently expanded the slots with a thin screwdriver.

    That said final score was 2 broken, 4 fitted. Don't think I have the best quality merchandise


    Sent from my iPhone using Audizine mobile app
    2013 S5, B&O, Sports Diff, Nav Plus, Carbon inlays, Akebono, APR Stage 2, Dual Pulley, DSG Tune, APR intake and back pipe. KW HAS. Variant 20x10, Carbon Imports rear spoiler, RS Grill, Passport 9500i and night surveillance by Blackvue :) Ultracharger and Intercooler, ECS X-pipe

  8. #8
    Veteran Member Four Rings 2010A6's Avatar
    Join Date
    Mar 10 2015
    AZ Member #
    319655
    My Garage
    2017 Jeep Cherokee; 2018 S3 Nano Gray
    Location
    Albany, NY

    Any pics of how they look after?


    Sent from my iPhone using Tapatalk
    -------------------------
    Current: 2018 Audi S3 2.0T Nano Gray / Magma Red
    Past: 2010 Audi A6 3.0T Midmight Blue / Pistachio Beige

  9. #9
    Veteran Member Three Rings
    Join Date
    Feb 01 2016
    AZ Member #
    368073
    My Garage
    09 A6 3.0T (Sold), 11 Cooper ALL4 S, 2013 S5
    Location
    Lowell, MA

    Daylight has retreated for the day, I'll snap a photo in the morning!


    Sent from my iPhone using Audizine mobile app
    2013 S5, B&O, Sports Diff, Nav Plus, Carbon inlays, Akebono, APR Stage 2, Dual Pulley, DSG Tune, APR intake and back pipe. KW HAS. Variant 20x10, Carbon Imports rear spoiler, RS Grill, Passport 9500i and night surveillance by Blackvue :) Ultracharger and Intercooler, ECS X-pipe

  10. #10
    Veteran Member Three Rings
    Join Date
    Feb 01 2016
    AZ Member #
    368073
    My Garage
    09 A6 3.0T (Sold), 11 Cooper ALL4 S, 2013 S5
    Location
    Lowell, MA

    @2010A6

    Nothing special really, just standard looking wheel.... But I like the look






    Sent from my iPhone using Audizine mobile app
    2013 S5, B&O, Sports Diff, Nav Plus, Carbon inlays, Akebono, APR Stage 2, Dual Pulley, DSG Tune, APR intake and back pipe. KW HAS. Variant 20x10, Carbon Imports rear spoiler, RS Grill, Passport 9500i and night surveillance by Blackvue :) Ultracharger and Intercooler, ECS X-pipe

  11. #11
    Veteran Member Four Rings SinCityA6's Avatar
    Join Date
    Jul 17 2011
    AZ Member #
    78357
    My Garage
    '07 Mustang GT Tungsten Grey/Black
    Location
    Sin City, USA

    Peelers are always a clean and classic Audi wheel. Nothing wrong here!


    Sent from my iPhone using Audizine mobile app
    '09 C6.5 A6
    M: 3.0t, GIAC/AWE Stg II+, Roc*Euro Intake
    I: Soul Black, CF Trim, LEDs, Paddles, C7 Shifter, Escort 9500i, Blackvue Dashcam
    E: Ibis White, 15% Tint, Smoked Corners, Tinted Tails, S4 Rockers, S6 Blades, RS6 Grill, OEM Splitters (F/R)
    S: H&R Springs/Sways, Koni FSDs, Adams Rotors, Akebono Pads, SS Brake Lines, Paint Matched Calipers, Niche Misano M116 Wheels

  12. #12
    Veteran Member Three Rings
    Join Date
    Feb 01 2016
    AZ Member #
    368073
    My Garage
    09 A6 3.0T (Sold), 11 Cooper ALL4 S, 2013 S5
    Location
    Lowell, MA

    Quote Originally Posted by SinCityA6 View Post
    Peelers are always a clean and classic Audi wheel. Nothing wrong here!


    Sent from my iPhone using Audizine mobile app
    Don't get me me wrong, I am really happy with the look, but I had originally set out to create a different look, but on balance I am happy the route I went, and I have sort of come to the conclusion that I will do nothing else visual but focus more on performance enhancement, though I reserve the right to change my mind :)

    Really looking forward to seeing your new wheel setup Sin!

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.