Lots of Goodies for B8/B8.5 Chassis, off 2015 allroad

[zcspec]

This past weekend, I purchased my wife a beautiful 14’ M-Sport xDrive 28i X3. This was a mistake because now I’m mauling over wanting to get back into a M series vehicle. I do apologize in advance if my path does not come to fruition, but I’ll put this out.

This is a FEELER for all the goodies off my 2015 allroad. I will be marking down who wants what. Here is what I have:

Engine: (I DO NOT require a swap for any of the following parts):
- HPA K04 turbo kit
- HPA HFC
- Kohlefaser Luft-Technik Intake System
- TR8 intercooler
- R8 coil packs

Suspension:
- H&R Coils (these may stay on the allroad)
- Eurocode front/rear sways
- Eurocode front/rear arms
- SPC Adjustable Upper Control Arm

Interior:
- S4 FBSW

Wheels:
- 19” UP Wheels 19x8.5 255/35/19
- 20mm front/rear spacers with extended lugs

I have pour lots of blood and sweat into this allroad, performed almost every upgrade myself, excluding the K04. I am borderline OCD so all parts are at minimum, very good in condition. The K04 may be spoken for locally and I believe AllroadCorbin wants my suspension goodies.

Pricing chart is below. Local sales preferred, but will ship @ buyer’s expense.

[Sauci]

How much for the control arms

[Ruma09]

I'll take the spacers


Sent from my iPhone using Tapatalk

[kdaffy]

Interested in the rear sway. Pm sent

[kingofnyc]

I will take TR8 and R8 coils.

[AllroadCorbin]

I do want your suspension stuff I think. Also you have chestnut brown sport seats correct? If you do, I have regular chestnut brown sport seats that look brand new. I've been trying so damn hard to find some... If you wanna make a swap deal let me know


Sent from my iPhone using Tapatalk

[AllroadCorbin]

I'm trying to decide between PSS10 and H&R. I want this thing to handle haha. I'm also on 20s with 255/35 rubber so it has to be able to stay high enough to prevent rubbing. The solos do a decent job of this but not 100%


Sent from my iPhone using Tapatalk

[burg3ngold]

K04 and fmic!

Sent from my ONE A2005 using Tapatalk

[Liquid Smoke]

interested in the HFC. (not familiar with HPA, is that the brand or something?) assuming it'll fit a B8 A4.

[zcspec]

Thanks for expressing interest everyone. Please see the pricing chart I put together. For the time being, pricing is FIRM because I will cover shipping anywhere in the ContUS. Alaska and Hawaii will be at the buyer's expense. Lastly, the earliest I plan on uninstalling everything is in about 2-3 weeks. Sorry for the delay.



If you have any questions, do not hesitate to PM me. Thanks!

[zcspec]

I do want your suspension stuff I think. Also you have chestnut brown sport seats correct? If you do, I have regular chestnut brown sport seats that look brand new. I've been trying so damn hard to find some... If you wanna make a swap deal let me know
Sent from my iPhone using Tapatalk

Not this allroad. LOL. I have beige, non-sport.

And...you want to go with the PSS10s over the H&Rs.

[AllroadCorbin]

Cough... H&Rs, cough


Sent from my iPhone using Tapatalk

[OzeyeruZ]

Will that Front BBK setup fit a B8.5 A4? How are the pads and rotors? Thanks!

[phillypino215]

pm sent.

[energy_legs]

In for SPC control arms if I'm not too late.

[zcspec]

Will that Front BBK setup fit a B8.5 A4? How are the pads and rotors? Thanks!

Oz, yes it wil but it will be a tight fit on stock 18's without spacers. The pads are new, rotors have just a couple thousand miles on them. The brake setup just was rebuilt, painted Porsche yellow with RS decals.

In for SPC control arms if I'm not too late.

You're #2 on the SPC priority list

All PMs replied. I'll be out of pocket for most of the day and will get back to any further inquires when I have a moment. Thank you!

[AllroadCorbin]

Not this allroad. LOL. I have beige, non-sport.

And...you want to go with the PSS10s over the H&Rs.

Good to know


Sent from my iPhone using Tapatalk

[Party_Marty]

fbsw MAYBBEEEEEEE

[vdubtucckn]

Interested in the intake system. Got pics? Thanks!

[euro400]

Are you selling for the complete bbk or just the rotors and pads?

[zcspec]

Are you selling for the complete bbk or just the rotors and pads?

Selling the complete A6 BBk with rotors/pads.

[SleeperCar]

im interested in the intake system....whens the feeler turn into available

[born2racekevin]

What the miles on the coils..also interested on the bbk kit if the budget work with me ha

Sent from my SAMSUNG-SM-G935A using Tapatalk

[zcspec]

Sorry for the delayed response. I should know Labor Day if the deal on my new BMW goes through or fails. Irregardless of the deal, I will be selling my Kohlefaser Luft-Technik Intake System. With that said and all the inquiries on it, it's pretty much SOLD. I just have to review the priority list and see who gets it.

[NJA-TRTL]

Are the coils still available? Didn't see anywhere the price since OP mentioned they "might be" staying on. Let me know, very interested!

[pwdrskr]

I'm trying to decide between PSS10 and H&R. I want this thing to handle haha. I'm also on 20s with 255/35 rubber so it has to be able to stay high enough to prevent rubbing. The solos do a decent job of this but not 100%


Sent from my iPhone using Tapatalk

FWIW I had rubbing on my allroad when running the Solowerks. Rubbing went away after converting to Vogtlands. Also, running 275/30/20s...

[AllroadCorbin]

I'll have to look into that. I have some rubbing now but not a ton. Enough to annoy me


Sent from my iPhone using Tapatalk

[pwdrskr]

I'll have to look into that. I have some rubbing now but not a ton. Enough to annoy me


Sent from my iPhone using Tapatalk

I only rubbed when there were deep compressions like when going over speed bumps.. It did irritate me. Zspec pointed out that there is a bolt under the wheel arch that is the culprit. It can be removed apparently with minimal negative impact. However, I prefer to keep my vehicles all buttoned up ha, ha.

[NJA-TRTL]

Coils going up for sale yet? Come Onnnnnnnnnn

[zcspec]

***Update*** The acquisition of a new Bimmer fell through so I will be keeping all the items on the car for the time being. Sorry for all the trouble.

[AllroadCorbin]

[QUOTE=zcspec;11868440]***Update*** The acquisition of a new Bimmer fell through so I will be keeping all the items on the car for the time being. Sorry for all the trouble.

Ayyyyeeeee good! What BMW was it btw


Sent from my iPhone using Tapatalk

[AllroadCorbin]

I only rubbed when there were deep compressions like when going over speed bumps.. It did irritate me. Zspec pointed out that there is a bolt under the wheel arch that is the culprit. It can be removed apparently with minimal negative impact. However, I prefer to keep my vehicles all buttoned up ha, ha.

How do the vogtlands ride / handle? I have the deep compression issue too but since I rarely go below 85 on the highway... Any dip usually means rub for me. I want this thing to handle. Was thinking some better coils and actually getting some sways. Send me a link or part number to your set up... I was thinking pss10 but if vogtlands are the business and can also not cost me out the ass then it's worth me checking out


Sent from my iPhone using Tapatalk