Vag-Com/VCDS Help

[NYC_Legacy]

I am trying to diagnose my Low Pressure Fuel pump in my RS. I have seen on VAGCOM Wiki that you can measure the duty cycle and if it is above 70% the pump should be replaced. However, I can not find that information in VCDS when I look for it in my car. The measuring block 106 only indicates that my electric fuel pump is ON no further information. Is it possible to get this information on the RS4? Thanks in advance!

[gesTTalt]

I use blocks 1, 103, and 106. 103 shows the lp fuel pressure, and 106 shows fuel rail and duty cycle. Not sure why your 106 doesn't show values. Are you tuned?

[NYC_Legacy]

I am not tuned. I should be entering these values in under the engine tab correct? What pressures should I be seeing on my LPFP at a warm idle, what pressures would indicate a problem?

[komseh]

NYC: I have the same thing as you when I view block 106. What year is your car?