I'm getting CEL P2004 & P2006
This could be 3 problems:
- Intake Manifold Runner Binding Or Sticking( check its fine )
- Vacuum Line Cracked or Broken (Replaced most of Vacuum Lines)
- Intake Manifold Runner Position Sensor 1 or Wiring ( Next Step )
I pretty much replaced all vacuum lines with High Performance Silicone Vacuum Hose. My next step is to replaced the Intake Manifold Runner Position Sensor 1. Can some please let me know which side is this? Is it drivers side or passenger side?
008196 - Intake Manifold Flap; Bank 1
P2004 - 007 - Stuck Open
Freeze Frame:
Fault Status: 01010010
Fault Priority: 4
Fault Frequency: 1
Reset counter: 40
Mileage: 223394 km
Time Indication: 0
Date: 2016.08.24
Time: 21:23:53
Freeze Frame:
RPM: 704 /min
Mass Air / Rev.: 141.7 mg/str
Temperature: 58.5°C
Idle
Voltage: 3.240 V
Speed: 0.0 km/h
008198 - Intake Manifold Flap; Bank 1
P2006 - 006 - Stuck Closed MIL ON
Freeze Frame:
Fault Status: 01010001
Fault Priority: 4
Fault Frequency: 2
Reset counter: 40
Mileage: 223394 km
Time Indication: 0
Date: 2016.08.24
Time: 21:23:53
Bookmarks