Audizine - An Automotive Enthusiast Community

Results 1 to 40 of 79

Hybrid View

Previous Post Previous Post   Next Post Next Post
  1. 12-15-2016 05:03 PM #1
    shaunm82
    shaunm82 is offline
    Veteran Member Four Rings
    Join Date
    Apr 22 2014
    AZ Member #
    191804
    My Garage
    2018 Q5, 2018 X1
    Location
    Sacramento

    Quote Originally Posted by IHave2Turbos View Post
    There is some coding involved to get the multifunction display to work. You also have the full color DIS correct?
    Yes sir~ Figured there might have been. Just wasn't sure what was involved. Have it handy by chance?
    2018 Q5 Tech Premium Plus
    2011 A4 JHM K04-R : JH MOTORSPORTS TUNED : CTS : 034 : ECS TUNING : SNOW PERFORMANCE
    Reply With Quote Reply With Quote  
  2. 12-22-2016 03:14 PM #2
    gk404
    gk404 is offline
    Active Member Two Rings gk404's Avatar
    Join Date
    Nov 24 2016
    AZ Member #
    386563
    Location
    Guelph

    I'm starting to piece together the parts for this and had a quick question. Is it essential to have the VIN from the Radio/Receiver Tuner or can this be overcome?

    Thanks again to everyone for the very helpful info on this and other threads.
    Reply With Quote Reply With Quote  
  3. 12-22-2016 04:56 PM #3
    The Infiltrator
    The Infiltrator is offline
    Veteran Member Four Rings The Infiltrator's Avatar
    Join Date
    Sep 09 2010
    AZ Member #
    63852
    Location
    Destin, FL

    Quote Originally Posted by gk404 View Post
    I'm starting to piece together the parts for this and had a quick question. Is it essential to have the VIN from the Radio/Receiver Tuner or can this be overcome?

    Thanks again to everyone for the very helpful info on this and other threads.
    No need, every time I went to get the CP taken off they didn't need it.
    2018 █S6 Prestige | Black Optic | S Sport | Driver Assist | Carbon Atlas
    DS1 Stage 2 | SRM TCU | Mike's GESI DP's | AWE Touring w/Black Tips | AWE S-FLO II Intake | SRM Turbo Inlets | H&R Sway Bars | ECSTuning Trans & Diff Mounts | JBX Driveshaft Carrier | Power Stop Z16 Ceramic Pads | BC Forged RZ21 20x9.5 ET30 Brushed Black 22lbs w/Michelin PS4S 265/35/20 | -15mm w/VCDS | CS-II Ceramic Coated | 20% Tint
    Reply With Quote Reply With Quote  
  4. 12-22-2016 08:36 PM #4
    elscotto80
    elscotto80 is offline
    Veteran Member Four Rings
    Join Date
    Jan 03 2013
    AZ Member #
    106799
    Location
    Baltimore

    Quote Originally Posted by shaunm82 View Post
    Yes sir~ Figured there might have been. Just wasn't sure what was involved. Have it handy by chance?
    Check out audienthusiasts.com...david did a great job of the swap and coding needed. I had to change a few when i swapped the stalk in.
    Reply With Quote Reply With Quote  
  5. 12-23-2016 07:36 AM #5
    shaunm82
    shaunm82 is offline
    Veteran Member Four Rings
    Join Date
    Apr 22 2014
    AZ Member #
    191804
    My Garage
    2018 Q5, 2018 X1
    Location
    Sacramento

    Quote Originally Posted by elscotto80 View Post
    Check out audienthusiasts.com...david did a great job of the swap and coding needed. I had to change a few when i swapped the stalk in.
    Thanks man, I actually figured it out a few days ago. Found out that I didn't have the 'DIS' installed option, checked that. Reinstalled my stalk and everything was good to go~
    2018 Q5 Tech Premium Plus
    2011 A4 JHM K04-R : JH MOTORSPORTS TUNED : CTS : 034 : ECS TUNING : SNOW PERFORMANCE
    Reply With Quote Reply With Quote  
« Previous Thread | Next Thread »

Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules



    © 2001-2025 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.