Hardware info for nose

[viper22]

Hey everyone, I'm in need of some help.

I am looking to find out what hardware I need to secure the nose of the car. For your help, I'll throw in the backstory:

Last October I buy a 2006 A4 to replace a Nissan Sentra. Upgrade!!! The Audi is in excellent shape for a car thats 10 years old. I'm super excited to have a FUN car. Well don't ya know my wife claims it as hers, and I get to drive our Honda Pilot. As close to a minivan as you can get without actually being a minivan. A few months go by, and I get a phone call at midnight. My wife is a 2nd shift nurse and typically works 3p-11p. I get the wonderful news that she was backing out of a parking spot and the front of the car is now on the ground...Yup, she lipped the curb and ripped the entire nose off the car. We've been driving it for a few months now with 550 paracord holding the nose on, and I would really like to get it fixed.

So, what hardware do I need to bolt the nose back on?

Thanks.

[RakkCity]

The bumper bolts on in several spots but it was likely damaged to the point where you’d need a good plastic welder or a new bumper altogether.

Two 10mm nuts on each side that secure the bumper studs to the fender.
Four(?) T25 screws that secure it to the core support on top.
Four flathead screws that secure the belly pan to the bottom of the bumper.
Several T20/25 screws that secure the wheel well liner to the bumper.

The two posts the bumper sits on might have been damaged too, they’re riveted to the crash bar.

I’d recommend taking it off, assessing the damage and visiting a junkyard or hitting up one of the part outs in the classifieds to grab all the parts you’ll need.


Sent from my iPhone using Audizine mobile app

[Okedokey]

https://www.ecstuning.com/Audi-B7_A4...Front_Bumper/3