B6 S4 owners - anybody got H&R springs fitted?

[James777]

Hello from Scotland!!

Guys looking for some help please from those of you that have these fitted. Could someone please provide me with the ground to fender distance on both the front and back of your S4. I'm looking to fit lowering springs and want to compare the drop of H&R springs with Rev Motorsport springs. I've already got the GTF measurement for the Rev Motorsport springs.

http://www.audizine.com/forum/showth...an-Avant-wagon

Thanks

James

PS. As many measurements as possible for the H&R springs would be great to see if they are consistent measurements.

[MarilynB6]

Mine measure 24.5 inches (62.23 cm) on the front and 24.75 inches (62.86 cm) on the rear.

[Ob3R]

It might be around ~.1 In of a difference between the two in the real world. I had H&R on one of them and had Rev Motoring on the most recent S4 I had. Personally I found the Rev Motoring ones a bit better only because they lowered about the same but were a little more smoother for DD. Can't go wrong either way though.

[James777]

MarilynB6 and ob3r - thanks for your replies. VinnysS4 has the Rev Motorsport springs fitted and his measurements are front 24" and rear 24.3/4". Liking these but I'm in Scotland so might end up more expensive than the H&R springs. I've contacted Rev Motorsport and waiting on a shipping cost. Brettanica also posted up with H&R spring measurements and they are front and back 63.2cm. I'm running S5 Peelers which are 9"x19" ET33 so a slight bit of poke on the front but perfect on the rear. Just unsure if the Rev Motorsport springs with GTF of 24", according to Vinny, might be to low and the fender catch the tyre. Going to do some research on here about GTF.