Audizine - An Automotive Enthusiast Community

Results 1 to 10 of 10
  1. #1
    Senior Member Two Rings yossefay's Avatar
    Join Date
    Jan 11 2016
    AZ Member #
    367017
    Location
    Pittsburgh/Youngstown

    Exhaust Tip Help

    Guest-only advertisement. Register or Log In now!
    I need 90mm exhaust tips to go on my custom exhaust setup ASAP. I'm looking for matte black tips and was curious if anyone has found any online. I found some tips that are 90mm but say they are made for the F80 on Amazon. Would those fit?


    Sent from my iPad using Audizine mobile app
    2018 B9 RS5 in Nardo Grey | 20' BBS CH-R's | Milltek Non-Resonated Catback | Carbon Imports CF Lip Spoiler | 35% Tint
    | 285's |
    Nardo RS5 IG

  2. #2
    Veteran Member Four Rings yjypm's Avatar
    Join Date
    Oct 08 2015
    AZ Member #
    360676
    Location
    Los Angeles

    Exhaust Tip Help

    Ecs has some exhaust tips for you but they are quite expensive. You can measure the outlet of your exhaust pipes if it matches the inlet of the f80 tips you should be fine
    Current: '18 M3 ZCP
    Mods: | E85 | BMS Intake | MPE | BBS Fi-R | Brembo GT F+R BBK |

    Sold: '14 Estoril Blue S5 P+
    | B&O | Sports Diff | B&W Nappa | Nav |
    Mods: | EPL 179/57+DSG | P&P TB | Revo SC Cooler | Ecode Head+Tail | ECS RS5 Front BBK | Macan Ducts | Brembo GT Rear BBK | AWE Touring | IE Intake | Bilstein B12 | USP Led kit | CR-15 | 034 Rear SB+Links | AluKruez | ECS Trans+Diff Inserts | Apikol Diff Mount | VCDS | P3 |

  3. #3
    Veteran Member Four Rings AudiTFSI3o3's Avatar
    Join Date
    Oct 20 2008
    AZ Member #
    34410
    My Garage
    2007 Audi A4 2.0T, 2011 IS350 AWD
    Location
    Denver

    i've been searching for months and haven't had any luck. that, plus there aren't many brands that make exhaust tips with 60mm or 2.34" inlet to fit on the AWE. only thing I've seen are the tips from iJDMtoy and they go for $80 a pop.
    '14 Audi S4 P+ | Sport Diff | | Ice Silver | APR Stage II Dual Pulley | TA Testpipes | APR DL501 | H&R Springs | SB Leds | Eurocode AK | 034 Trans Insert | 034 Motor Mounts | Vossen CV-3 | Stoptech ST-60 BBK | JHM 2-piece rears | AMS Cooling System |
    '16 Acura RDX AWD | Slate Silver

  4. #4
    Veteran Member Four Rings doughboy17's Avatar
    Join Date
    Aug 05 2010
    AZ Member #
    62317
    My Garage
    2007 Audi A4 3.2 Quattro; 2021 Mazda CX-5 Turbo Carbon Edition (my wife's vehicle)
    Location
    Central IL

    Just the tips ...? :D
    2014 Monsoon Gray S4 Prem+ | S-Tronic w/ EPL tune | LH Magma Nappa leather interior | Carbon Atlas inlays | Sports Diff | Adaptive Damping suspension | 19” peelers | MMI Nav | B&O | EPL Stage 2 via JHM 179mm crank pulley | Resonated AWE Touring w/ 102mm tips | ECS silicone intake tube with aFe filter | RKX tranny mount insert | tints | VAG COM mods via OBDeleven | Autostyle Mats

  5. #5
    Senior Member Two Rings yossefay's Avatar
    Join Date
    Jan 11 2016
    AZ Member #
    367017
    Location
    Pittsburgh/Youngstown

    Quote Originally Posted by doughboy17 View Post
    Just the tips ...? :D
    Not sure if you're making a "just the tip" joke but yes, just the tips.
    2018 B9 RS5 in Nardo Grey | 20' BBS CH-R's | Milltek Non-Resonated Catback | Carbon Imports CF Lip Spoiler | 35% Tint
    | 285's |
    Nardo RS5 IG

  6. #6
    Veteran Member Four Rings whiped's Avatar
    Join Date
    Apr 05 2016
    AZ Member #
    371376
    Location
    Portland, OR

    You could always paint your stock tips until you find some new ones you like.
    Geoff
    '13 S4 - Glacier White | DSG | 034 Stage 2++ | Current Setup
    452WHP / 443WTQ | 11.352 @ 119.26 | @dirtyaudi

  7. #7
    Senior Member Two Rings yossefay's Avatar
    Join Date
    Jan 11 2016
    AZ Member #
    367017
    Location
    Pittsburgh/Youngstown

    Quote Originally Posted by whiped View Post
    You could always paint your stock tips until you find some new ones you like.
    Really? Just get them powdercoated or something?
    2018 B9 RS5 in Nardo Grey | 20' BBS CH-R's | Milltek Non-Resonated Catback | Carbon Imports CF Lip Spoiler | 35% Tint
    | 285's |
    Nardo RS5 IG

  8. #8
    Senior Member Three Rings
    Join Date
    Jun 20 2015
    AZ Member #
    338411
    Location
    NC

    Just plastidip them fuck it. Yes it holds up I did mine and they were good for 3 years and I sold it with them still black

  9. #9
    Veteran Member Four Rings whiped's Avatar
    Join Date
    Apr 05 2016
    AZ Member #
    371376
    Location
    Portland, OR

    I don't think I would dip them but, you can use high temperature paint and it should hold up.
    Geoff
    '13 S4 - Glacier White | DSG | 034 Stage 2++ | Current Setup
    452WHP / 443WTQ | 11.352 @ 119.26 | @dirtyaudi

  10. #10
    Senior Member Three Rings
    Join Date
    Jun 20 2015
    AZ Member #
    338411
    Location
    NC

    Dip is good for over 300°F. Your exhaust tips do not even get close to that.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2025 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.