Audizine - An Automotive Enthusiast Community

Results 1 to 3 of 3
  1. #1
    Junior Member Two Rings
    Join Date
    Jun 06 2012
    AZ Member #
    94762
    Location
    South Australia

    Can not connect to engine controller after replacing lcd centre display

    Guest-only advertisement. Register or Log In now!
    Hi there, i replaced the lcd centre display recently, i damaged a couple of the traces, i had them repaired by an electronics specialist, i put the cluster back together and back into the car, the ABS and traction control lights are up and the handbrake and car with the key lights are flashing constantly, the tachometer also does not work but all other gauges do work. The car can not connect to the engine controller via vcds anymore however i can still connect to the abs controller.. can anybody help me please??
    Thank you

  2. #2
    Veteran Member Three Rings okkim's Avatar
    Join Date
    Dec 07 2004
    AZ Member #
    4397
    Location
    Finland

    Have you checked that the connectors are connected well?

  3. #3
    Junior Member Two Rings
    Join Date
    Jun 06 2012
    AZ Member #
    94762
    Location
    South Australia

    Yeah they are all in properly and latched.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.