Audizine - An Automotive Enthusiast Community

Results 1 to 27 of 27
  1. #1
    Senior Member Three Rings kunaldoshi's Avatar
    Join Date
    Jan 02 2014
    AZ Member #
    137763
    Location
    United States

    RS7 Exhaust Options

    Guest-only advertisement. Register or Log In now!
    So I'm in the process of picking up a '16 RS7 and I'm considering either doing downpipes or a full exhaust.

    I've been browsing through most of this section and I was hoping there was a thread with all the exhaust options for the RS7 but I couldn't find one. I know APR makes downpipes and Akrapovic & Milltek make full exhausts. Are there any other options out there and how do they sounds compared to each other. Any advice would help!
    2020 Cayenne Turbo
    Gone: 2016 Glacier White Metallic RS7 | APR Stage 2 | Akrapovic Exhaust | Custom 3" DPs | RocEuro Intake | Europrice Tail Lights | CF Mirrors | CF & Alcantara Steering Wheel | 20" HRE FF01
    Gone: 2014 Suzuka Gray Metallic RS5 | AWE Tuning Track Exhaust | Eventuri Red CF Intake | H&R OE Sport Springs

  2. #2
    Active Member One Ring
    Join Date
    May 05 2016
    AZ Member #
    372889
    Location
    Cabo San Lucas, MX

    Congrats on the RS7. I just got a 16 S8 and currently ordering a 17 RS7.

    I am interested in this too. For both the S8 and the RS7. I think they are pretty close with the S8 needing a 12" or so piece that any shop can add.

  3. #3
    Active Member Two Rings almors's Avatar
    Join Date
    May 15 2015
    AZ Member #
    332763
    Location
    Scotland

    Supersprint and Capristo also make exhausts for the RS7/RS6. Supersprint one has lots of options. Cheaper alternative is to get a custom centre piece to take out the resonators. A couple of guys have done that in the UK.
    RS6 C7 Riviera Blue, Carbon Pack, Sports Exhaust, BC Forged HS04's
    S3 Sportback Black Edition, Panther Black, BBS CHs
    Previous:
    C63 AMG Coupe, Fire Opal Red, Performance Pack, HRE P44SC's
    RS4 B7 Saloon, Avus Silver, HRE P40s, Tubi exhaust
    Volvo S60 R Black Saphire, Evolve Suspension + aerodynamics, BMC
    Volvo S40 T4 Standard
    Instagram @rs_amo

  4. #4
    Senior Member Three Rings kunaldoshi's Avatar
    Join Date
    Jan 02 2014
    AZ Member #
    137763
    Location
    United States

    Quote Originally Posted by ChrisandAlex1 View Post
    Congrats on the RS7. I just got a 16 S8 and currently ordering a 17 RS7.

    I am interested in this too. For both the S8 and the RS7. I think they are pretty close with the S8 needing a 12" or so piece that any shop can add.
    Thanks man, that's a nice combo!
    2020 Cayenne Turbo
    Gone: 2016 Glacier White Metallic RS7 | APR Stage 2 | Akrapovic Exhaust | Custom 3" DPs | RocEuro Intake | Europrice Tail Lights | CF Mirrors | CF & Alcantara Steering Wheel | 20" HRE FF01
    Gone: 2014 Suzuka Gray Metallic RS5 | AWE Tuning Track Exhaust | Eventuri Red CF Intake | H&R OE Sport Springs

  5. #5
    Registered User Four Rings Sales@DriveAuto's Avatar
    Join Date
    Apr 13 2012
    AZ Member #
    91769
    Location
    Clifton/Mountainside, NJ

    We've installed a number of Milltek systems (both catback and with downpipes), and it's pretty special. Around down, its pretty demure, but when you open the valves, you can hear it coming from blocks away. It has a real Jekyll/Hyde personality to it.

  6. #6
    Senior Member Two Rings
    Join Date
    May 30 2016
    AZ Member #
    374025
    Location
    Lake Forest, CA

    APR Downpipes don't look like they play nice with most aftermarket exhausts. The relocated cats force you to either go custom or retain the stock setup after the cats.

    Getting them installed tomorrow. Not expecting to need to change the OEM exhaust because it already has a nice sound when in sport mode and the dps should increase it since it removes 2 resonators.

    Performance wise, an aftermarket exhaust doesn't give you much of a hp increase. Just mainly weight savings. Downpipes are the best bang for your buck. APR pipes give you a free update to stage 2 map too.

  7. #7
    Senior Member Three Rings kunaldoshi's Avatar
    Join Date
    Jan 02 2014
    AZ Member #
    137763
    Location
    United States

    Thanks guys, downpipes seem like the way I'm going to go. Although that guy Tony's Akrapovic exhaust with 3" downpipes sounds ridiculous
    2020 Cayenne Turbo
    Gone: 2016 Glacier White Metallic RS7 | APR Stage 2 | Akrapovic Exhaust | Custom 3" DPs | RocEuro Intake | Europrice Tail Lights | CF Mirrors | CF & Alcantara Steering Wheel | 20" HRE FF01
    Gone: 2014 Suzuka Gray Metallic RS5 | AWE Tuning Track Exhaust | Eventuri Red CF Intake | H&R OE Sport Springs

  8. #8
    Senior Member Three Rings kunaldoshi's Avatar
    Join Date
    Jan 02 2014
    AZ Member #
    137763
    Location
    United States

    Anyone have any videos of an RS7 with 3" downpipes and no other modifications to the stock sport exhaust?
    2020 Cayenne Turbo
    Gone: 2016 Glacier White Metallic RS7 | APR Stage 2 | Akrapovic Exhaust | Custom 3" DPs | RocEuro Intake | Europrice Tail Lights | CF Mirrors | CF & Alcantara Steering Wheel | 20" HRE FF01
    Gone: 2014 Suzuka Gray Metallic RS5 | AWE Tuning Track Exhaust | Eventuri Red CF Intake | H&R OE Sport Springs

  9. #9
    Stage 2 Banner Advertiser Four Rings Alex@TAG's Avatar
    Join Date
    Nov 15 2011
    AZ Member #
    83971
    My Garage
    ABT RS5-R, SQ5, 488 Pista
    Location
    San Diego, CA



    We have done quite a few different options on the RS7's including the Akrapovic, Akrapovic with Downpipes, Milltek Res & Non-res.

    It really all depends on how much power and sound you want out of it. The RS7 is absurdly fast as it is, so i would say 50% of our clients go with the the Akrapovic, 25% go with Milltek, and 25% go with some variation with the downpipes. After owning 3 RS7's personally, i really LOVE the sound of the Akrapovic over the Milltek non-Res mainly because it sounds much moire refined. It is also quite a bit more expensive though so keep that in mind.

    When you are running downpipes, remember with the additional power output that these cars are producing, i HIGHLY suggest going with a complete setup that also includes Software, Intake as well as a Intercooler that keeps the car running in the optimum temps.

    Here are a few videos for you. Feel free to give us a call - be more than happy to help you out with any questions :)

    Akrapovic Evolution Line System







    Akrapovic Evolution Line with Catless Downpipes



    Milltek Non-Resonated Exhaust



    TAG MOTORSPORTS
    (866) 748-4388
    SITE: www.TAGMotorsports.com
    EMAIL: [email protected]
    AUTHORIZED DEALER: HRE Wheels || FlowForm || Vossen || ABT || TechArt || AWE Tuning || APR || KW Suspension || Milltek || BBS || Brembo || Michelin & more!

  10. #10
    Established Member Two Rings Winterk80's Avatar
    Join Date
    Feb 16 2016
    AZ Member #
    368850
    Location
    Oklahoma City

    Akrapovic sounds the best, but it's also 3x more than the Milltek. I just installed a cat back Milltek, LOVE it. Really brings the car to life, no more sneaking into the neighborhood at night though, you definitely will be heard even on comfort mode. The comfort mode is kind of like the noise level of a mustang or camero that's stock, the Dynamic mode is fairly loud on the outside, but not very loud in the car due to all the damping in the car. I would say the noise level of the dynamic setting is roughly comparable to a supped up mustang or comparable muscle car that's had some work done. Sound is different of course, only talking about noise level.

    Dynamic sound is very throaty I really like it. It's really how the car should have sounded from the factory in my opinion.

  11. #11
    Senior Member Three Rings
    Join Date
    Aug 30 2014
    AZ Member #
    279120
    My Garage
    2023 Porsche Carrera S, Porsche Macan S, 2022 Porsche Cayenne GTS, 2013 Audi S4
    Location
    So Florida

    I have the Milltek non-resonated exhaust and I'm happy with it. The Akrapovic is very nice, but I could not justify spending that kind of coin on an exhaust that really does not add much power. As stated above the non-resonated Milltek is very subtle when valves are closed and much more aggressive when opened. I believe the APR downpipes also replace the mid-pipes of an exhaust like the Milltek, so you would not be using the Milltek midpipes if selecting the APR DP's. I plan on getting the APR DP's and going stage 2 soon! This APR DP/Stage 2 Flash combo with the non-resonated Milltek exhaust will be slightly lower in cost compared to the Akrapovic exhaust alone.
    2023 Porsche 911 Carrera 4S
    2023 Porsche Macan S
    2022 Porsche Cayenne GTS
    2013 Audi S4 (son's) Konis/H&R Sport Springs, ECode sways & HL's, CR15, Alu Kreuz, H&R 10F/12R, RS4 Grill, EPL Stage 2/TCU tune, 034 intake tube/air box mod, AWE Track 102

  12. #12
    Senior Member Three Rings kunaldoshi's Avatar
    Join Date
    Jan 02 2014
    AZ Member #
    137763
    Location
    United States

    Quote Originally Posted by Alex@TAG View Post


    We have done quite a few different options on the RS7's including the Akrapovic, Akrapovic with Downpipes, Milltek Res & Non-res.

    It really all depends on how much power and sound you want out of it. The RS7 is absurdly fast as it is, so i would say 50% of our clients go with the the Akrapovic, 25% go with Milltek, and 25% go with some variation with the downpipes. After owning 3 RS7's personally, i really LOVE the sound of the Akrapovic over the Milltek non-Res mainly because it sounds much moire refined. It is also quite a bit more expensive though so keep that in mind.

    When you are running downpipes, remember with the additional power output that these cars are producing, i HIGHLY suggest going with a complete setup that also includes Software, Intake as well as a Intercooler that keeps the car running in the optimum temps.

    Here are a few videos for you. Feel free to give us a call - be more than happy to help you out with any questions :)

    Akrapovic Evolution Line System







    Akrapovic Evolution Line with Catless Downpipes



    Milltek Non-Resonated Exhaust



    Sean thanks so much for the advice. Also just got the CF steering wheel and painted side reflectors! Look amazing can't wait to get them. Do you have an videos of a Milltek resonated exhaust?
    2020 Cayenne Turbo
    Gone: 2016 Glacier White Metallic RS7 | APR Stage 2 | Akrapovic Exhaust | Custom 3" DPs | RocEuro Intake | Europrice Tail Lights | CF Mirrors | CF & Alcantara Steering Wheel | 20" HRE FF01
    Gone: 2014 Suzuka Gray Metallic RS5 | AWE Tuning Track Exhaust | Eventuri Red CF Intake | H&R OE Sport Springs

  13. #13
    Senior Member Three Rings kunaldoshi's Avatar
    Join Date
    Jan 02 2014
    AZ Member #
    137763
    Location
    United States

    Quote Originally Posted by Winterk80 View Post
    Akrapovic sounds the best, but it's also 3x more than the Milltek. I just installed a cat back Milltek, LOVE it. Really brings the car to life, no more sneaking into the neighborhood at night though, you definitely will be heard even on comfort mode. The comfort mode is kind of like the noise level of a mustang or camero that's stock, the Dynamic mode is fairly loud on the outside, but not very loud in the car due to all the damping in the car. I would say the noise level of the dynamic setting is roughly comparable to a supped up mustang or comparable muscle car that's had some work done. Sound is different of course, only talking about noise level.

    Dynamic sound is very throaty I really like it. It's really how the car should have sounded from the factory in my opinion.
    Thanks for the help! Yeah Akra is just too expensive for me to justify it but do you have the resonated or non resonated? I definitely can't be rolling into the neighborhood at the times I do being very loud lol
    2020 Cayenne Turbo
    Gone: 2016 Glacier White Metallic RS7 | APR Stage 2 | Akrapovic Exhaust | Custom 3" DPs | RocEuro Intake | Europrice Tail Lights | CF Mirrors | CF & Alcantara Steering Wheel | 20" HRE FF01
    Gone: 2014 Suzuka Gray Metallic RS5 | AWE Tuning Track Exhaust | Eventuri Red CF Intake | H&R OE Sport Springs

  14. #14
    Senior Member Three Rings kunaldoshi's Avatar
    Join Date
    Jan 02 2014
    AZ Member #
    137763
    Location
    United States

    Quote Originally Posted by TSpoolin View Post
    I have the Milltek non-resonated exhaust and I'm happy with it. The Akrapovic is very nice, but I could not justify spending that kind of coin on an exhaust that really does not add much power. As stated above the non-resonated Milltek is very subtle when valves are closed and much more aggressive when opened. I believe the APR downpipes also replace the mid-pipes of an exhaust like the Milltek, so you would not be using the Milltek midpipes if selecting the APR DP's. I plan on getting the APR DP's and going stage 2 soon! This APR DP/Stage 2 Flash combo with the non-resonated Milltek exhaust will be slightly lower in cost compared to the Akrapovic exhaust alone.
    That's a great point and exactly what I was thinking about doing but just sticking with the stock exhaust and getting rid of a resonator or something. APR downpipes, Stage 2, Intake and a resonator delete but just not sure how that'll sound
    2020 Cayenne Turbo
    Gone: 2016 Glacier White Metallic RS7 | APR Stage 2 | Akrapovic Exhaust | Custom 3" DPs | RocEuro Intake | Europrice Tail Lights | CF Mirrors | CF & Alcantara Steering Wheel | 20" HRE FF01
    Gone: 2014 Suzuka Gray Metallic RS5 | AWE Tuning Track Exhaust | Eventuri Red CF Intake | H&R OE Sport Springs

  15. #15
    Established Member Two Rings Winterk80's Avatar
    Join Date
    Feb 16 2016
    AZ Member #
    368850
    Location
    Oklahoma City

    Quote Originally Posted by kunaldoshi View Post
    Thanks for the help! Yeah Akra is just too expensive for me to justify it but do you have the resonated or non resonated? I definitely can't be rolling into the neighborhood at the times I do being very loud lol
    You're welcome. I have the non-resonated.

  16. #16
    Stage 2 Banner Advertiser Four Rings Sean@TAG's Avatar
    Join Date
    Jun 27 2014
    AZ Member #
    259842
    My Garage
    Seafox Boat, Jetta, F150, Travel trailer
    Location
    San Diego

    Quote Originally Posted by kunaldoshi View Post
    Sean thanks so much for the advice. Also just got the CF steering wheel and painted side reflectors! Look amazing can't wait to get them. Do you have an videos of a Milltek resonated exhaust?
    Pm on the way!
    TAG MOTORSPORTS
    (866) 748-4388
    SITE: www.TAGMotorsports.com
    EMAIL: [email protected]
    AUTHORIZED DEALER: HRE Wheels || FlowForm || Vossen || ABT Tuning || TechArt || AWE Tuning || APR || KW Suspension || Milltek || BBS || Brembo || Michelin & more!

  17. #17
    Active Member Two Rings LPalushaj's Avatar
    Join Date
    Apr 16 2016
    AZ Member #
    371931
    Location
    Rochester, MI

    Sean. Can you send me one as well. Struggling to find a resonated video online


    Sent from my iPhone using Audizine mobile app

  18. #18
    Active Member Two Rings LPalushaj's Avatar
    Join Date
    Apr 16 2016
    AZ Member #
    371931
    Location
    Rochester, MI

    Still trying to decide on an exhaust myself


    Sent from my iPhone using Audizine mobile app

  19. #19
    Senior Member Three Rings kunaldoshi's Avatar
    Join Date
    Jan 02 2014
    AZ Member #
    137763
    Location
    United States

    Ended up with an Akrapovic exhaust, thanks for all the help!
    2020 Cayenne Turbo
    Gone: 2016 Glacier White Metallic RS7 | APR Stage 2 | Akrapovic Exhaust | Custom 3" DPs | RocEuro Intake | Europrice Tail Lights | CF Mirrors | CF & Alcantara Steering Wheel | 20" HRE FF01
    Gone: 2014 Suzuka Gray Metallic RS5 | AWE Tuning Track Exhaust | Eventuri Red CF Intake | H&R OE Sport Springs

  20. #20
    Veteran Member Four Rings
    Join Date
    Jun 30 2012
    AZ Member #
    96087
    My Garage
    16 Lava Orange GT3 RS, 18 Nardo Grey RS3, 17 Panda Macan GTS, 91 C2 964, 16 F150 Lariat, 63 Impala
    Location
    Woodstock GA

    Quote Originally Posted by kunaldoshi View Post
    Ended up with an Akrapovic exhaust, thanks for all the help!
    Good for you! ;-)

  21. #21
    Senior Member Three Rings kunaldoshi's Avatar
    Join Date
    Jan 02 2014
    AZ Member #
    137763
    Location
    United States

    Quote Originally Posted by tonymission View Post
    Good for you! ;-)
    Thanks man. Doing 3" DPs like yours how's your GT3? My buddy has a Turbo S, wonder how they compare.
    2020 Cayenne Turbo
    Gone: 2016 Glacier White Metallic RS7 | APR Stage 2 | Akrapovic Exhaust | Custom 3" DPs | RocEuro Intake | Europrice Tail Lights | CF Mirrors | CF & Alcantara Steering Wheel | 20" HRE FF01
    Gone: 2014 Suzuka Gray Metallic RS5 | AWE Tuning Track Exhaust | Eventuri Red CF Intake | H&R OE Sport Springs

  22. #22
    Stage 2 Banner Advertiser Four Rings Alex@TAG's Avatar
    Join Date
    Nov 15 2011
    AZ Member #
    83971
    My Garage
    ABT RS5-R, SQ5, 488 Pista
    Location
    San Diego, CA

    Quote Originally Posted by kunaldoshi View Post
    Ended up with an Akrapovic exhaust, thanks for all the help!
    Shipping out the Akrapovic tomorrow for you buddy! Get excited. The tips look great in gloss too :)
    TAG MOTORSPORTS
    (866) 748-4388
    SITE: www.TAGMotorsports.com
    EMAIL: [email protected]
    AUTHORIZED DEALER: HRE Wheels || FlowForm || Vossen || ABT || TechArt || AWE Tuning || APR || KW Suspension || Milltek || BBS || Brembo || Michelin & more!

  23. #23
    Senior Member Three Rings kunaldoshi's Avatar
    Join Date
    Jan 02 2014
    AZ Member #
    137763
    Location
    United States

    Quote Originally Posted by Alex@TAG View Post
    Shipping out the Akrapovic tomorrow for you buddy! Get excited. The tips look great in gloss too :)
    Haha can't wait man
    2020 Cayenne Turbo
    Gone: 2016 Glacier White Metallic RS7 | APR Stage 2 | Akrapovic Exhaust | Custom 3" DPs | RocEuro Intake | Europrice Tail Lights | CF Mirrors | CF & Alcantara Steering Wheel | 20" HRE FF01
    Gone: 2014 Suzuka Gray Metallic RS5 | AWE Tuning Track Exhaust | Eventuri Red CF Intake | H&R OE Sport Springs

  24. #24
    Stage 2 Banner Advertiser Four Rings Alex@TAG's Avatar
    Join Date
    Nov 15 2011
    AZ Member #
    83971
    My Garage
    ABT RS5-R, SQ5, 488 Pista
    Location
    San Diego, CA

    Quote Originally Posted by kunaldoshi View Post
    Haha can't wait man
    I will email you tracking as soon as i have it!
    TAG MOTORSPORTS
    (866) 748-4388
    SITE: www.TAGMotorsports.com
    EMAIL: [email protected]
    AUTHORIZED DEALER: HRE Wheels || FlowForm || Vossen || ABT || TechArt || AWE Tuning || APR || KW Suspension || Milltek || BBS || Brembo || Michelin & more!

  25. #25
    Veteran Member Four Rings
    Join Date
    Jun 30 2012
    AZ Member #
    96087
    My Garage
    16 Lava Orange GT3 RS, 18 Nardo Grey RS3, 17 Panda Macan GTS, 91 C2 964, 16 F150 Lariat, 63 Impala
    Location
    Woodstock GA

    Quote Originally Posted by kunaldoshi View Post
    Thanks man. Doing 3" DPs like yours how's your GT3? My buddy has a Turbo S, wonder how they compare.
    Completely different cars (RS7 and GT3)! Love them both really .. Turbo S in comparison is heavier and feels softer, more luxurious. GT3 is just a raw, street legal race car :)


    Sent from my iPhone using Tapatalk

  26. #26
    Stage 2 Banner Advertiser Four Rings Kai@EliteMS's Avatar
    Join Date
    Mar 22 2011
    AZ Member #
    72759
    Location
    Lindenhurst NY - Long Island

    Here is our RS7 with Milltek Non Res & APR Downpipes. We have this setup usually in stock or a day away at the supplier. Let us know if you're interested.

    ELITE MOTORSPORTS
    21 W. SUNRISE HIGHWAY LINDENHURST NY 11757
    www.elitemotorsport.net - www.elitemotorgroupny.com

    P: 631.775.6634
    Follow Us On Facebook
    Follow Us On Instagram #elitemotorsports
    Follow Us On Twitter

  27. #27
    Active Member One Ring
    Join Date
    Jun 05 2021
    AZ Member #
    603990
    Location
    Gothenburg

    What are the measures of the stock exhaust on audi rs7 2017? I want to build my own exhaust with stainless steal all the way.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2025 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.