Chipwerke Pro Tuning Box

**bitcpy** · 07-20-2016 10:19 AM

I have a Chipwerke Pro that was installed in a 2014 Audi S4. Car is going back from lease. Unit was purchased fall of 2015 if I am not mistaken. Works perfect and great boost in power.

Website has them listed for $449.

Looking for $350.

20160720_111111.jpg

**mintytoo** · 07-20-2016 10:57 AM

What's that little grey adapter in the middle of the pic?

**sacandagaD** · 07-20-2016 11:04 AM

Originally Posted by mintytoo

What's that little grey adapter in the middle of the pic?

Pardon my chiming in: That's a dummy connector to protect Chip box connectors in shipping.

**bitcpy** · 07-20-2016 11:19 AM

It's actually kind of like a loopback plug. If you have to pull the Chipwerke Pro to do any maintenance, you can plug in that little dongle in its place and be able to drive and start car with Chipwerke being missing.

Example: If you want to take car in for service and dont want to remove everything, just pull the box out, plug in the terminator adapter, and you are good to go. :)

**sacandagaD** · 07-20-2016 11:34 AM

Originally Posted by bitcpy

It's actually kind of like a loopback plug. If you have to pull the Chipwerke Pro to do any maintenance, you can plug in that little dongle in its place and be able to drive and start car with Chipwerke being missing.

Example: If you want to take car in for service and dont want to remove everything, just pull the box out, plug in the terminator adapter, and you are good to go. :)

Good to know, now I'm glad I didn't throw mine out!

**gsmoov3** · 07-20-2016 11:58 AM

Originally Posted by bitcpy

I have a Chipwerke Pro that was installed in a 2014 Audi S4. Car is going back from lease. Unit was purchased fall of 2015 if I am not mistaken. Works perfect and great boost in power.

Website has them listed for $449.

Looking for $350.

20160720_111111.jpg

PM sent

Sent from my iPhone using Tapatalk

**k6750gsxr** · 07-20-2016 12:34 PM

how much shipped to 34653.

thanks

**jbmark33** · 07-20-2016 12:50 PM

Can you give us a review? There is data on the power increase, but what about the daily drive-ability? Auto or manual?

**withENEMYin** · 07-20-2016 12:52 PM

Im currently running GIAC stg 2, Forge underdrive SC pulley, and JHM Overdrive crank pulley. Is it possible to also throw Chipwerke pro on it? Gains? Problems?

Thanks

**mintytoo** · 07-20-2016 01:14 PM

Originally Posted by bitcpy

It's actually kind of like a loopback plug. If you have to pull the Chipwerke Pro to do any maintenance, you can plug in that little dongle in its place and be able to drive and start car with Chipwerke being missing.

Example: If you want to take car in for service and dont want to remove everything, just pull the box out, plug in the terminator adapter, and you are good to go. :)

Ha ha, awesome, thanks for the info. I bought the chip second hand and had no instructions about that thing.

**bitcpy** · 07-20-2016 01:28 PM

Thanks for the interest guys.. Payment received from gsmoov3 so looks like we have a deal.

withENEMYin: I wouldnt combine this with your setup. Its for stock or stock + pulley. If you already have ECU software updated, this is redundant for you.

jbmark33: My S4 is a winter driver and semi-daily driver so I really didnt do any dyno or performance measurement. I can only tell you that there is a noticeable difference in power output in the mid to high RPM. I bought mine after being on the market for a while, and mine was after the software update which fixed alot of problems people were seeing (fuel cut, boost bypass, etc). I had zero issues and the main reason for me was to avoid TD1 issues.

**mrmomo313** · 07-20-2016 01:41 PM

Originally Posted by withENEMYin

Im currently running GIAC stg 2, Forge underdrive SC pulley, and JHM Overdrive crank pulley. Is it possible to also throw Chipwerke pro on it? Gains? Problems?

Thanks

Read this thread my friend: http://www.audizine.com/forum/showth...lopment-thread

Not sure if you thought of doing upper/lower pulley on your own... Read that thread. But a CW pro stacked with your GIAC tune will help with boost bypass you're currently having with your dual pulley setup...

**whiped** · 07-20-2016 02:26 PM

Just another random review for you guys.

I bought a CW for when I upgrade my pulleys and want to keep the boost under control.

I currently have this stacked with my Stage I STaSIS(Revo) tune just for kicks.

I have it set on 2-1 as anything higher throws a CEL at WOT. It produces quite a bit more mid-range torque without any observable issues. (I logged it pretty intensively for a week or so)

**withENEMYin** · 07-20-2016 03:49 PM

Originally Posted by bitcpy

I have a Chipwerke Pro that was installed in a 2014 Audi S4. Car is going back from lease. Unit was purchased fall of 2015 if I am not mistaken. Works perfect and great boost in power.

Website has them listed for $449.

Looking for $350.

20160720_111111.jpg

PM sent if still available.