Audizine - An Automotive Enthusiast Community

Results 1 to 7 of 7
  1. #1
    Senior Member Two Rings Mech_Mike412's Avatar
    Join Date
    Jul 06 2016
    AZ Member #
    375782
    Location
    Pittsburgh, PA USA

    B7 A4 Rear Seat Latch

    Guest-only advertisement. Register or Log In now!
    My passenger side rear seat latch won't unlock/unlatch. Tried using the key to unlock it, didn't work. The handle feels like it's not connected to anything. Any help to get this revolved will be appreciated. Don't wanna replace the unit if I don't have to, but will replace it if necessary. Thanks gents

    Sent from my SM-G900V using Tapatalk
    2008 Audi A4 Quattro S-Line 6MT
    K&N Filter - ECS Turbo Inlet Hose - ECS Vent Boost Gauge - GFB Diverter Valve - Morimoto 3000K HID Fogs - JHM Stage 1 93oct - CTS Charge Pipes - Custom Catback, CTS Mufflers

  2. #2
    Senior Member Two Rings
    Join Date
    Feb 08 2012
    AZ Member #
    87902
    Location
    Dallas, GA

    They're pretty cheaply made and mostly plastic inside. If you're having trouble with it, it's probably time to replace it. It was one of the first things I had to replace on my car when I got it at only 4 years old. Unfortunately, I don't remember too many details of how to get it out so I'm not sure how to release it if it's stuck.

  3. #3
    Senior Member Two Rings Mech_Mike412's Avatar
    Join Date
    Jul 06 2016
    AZ Member #
    375782
    Location
    Pittsburgh, PA USA

    Quote Originally Posted by KingWulfgar View Post
    They're pretty cheaply made and mostly plastic inside. If you're having trouble with it, it's probably time to replace it. It was one of the first things I had to replace on my car when I got it at only 4 years old. Unfortunately, I don't remember too many details of how to get it out so I'm not sure how to release it if it's stuck.
    Dang, if I knew how to release it I could probably replace it but....

    Sent from my SM-G900V using Tapatalk
    2008 Audi A4 Quattro S-Line 6MT
    K&N Filter - ECS Turbo Inlet Hose - ECS Vent Boost Gauge - GFB Diverter Valve - Morimoto 3000K HID Fogs - JHM Stage 1 93oct - CTS Charge Pipes - Custom Catback, CTS Mufflers

  4. #4
    Senior Member Two Rings Mech_Mike412's Avatar
    Join Date
    Jul 06 2016
    AZ Member #
    375782
    Location
    Pittsburgh, PA USA

    Bump! Any more input?

    Sent from my SM-G900V using Tapatalk
    2008 Audi A4 Quattro S-Line 6MT
    K&N Filter - ECS Turbo Inlet Hose - ECS Vent Boost Gauge - GFB Diverter Valve - Morimoto 3000K HID Fogs - JHM Stage 1 93oct - CTS Charge Pipes - Custom Catback, CTS Mufflers

  5. #5
    Veteran Member Four Rings Denio24's Avatar
    Join Date
    Jan 24 2013
    AZ Member #
    108156
    Location
    Chicago

    Quote Originally Posted by Mech_Mike412 View Post
    Bump! Any more input?

    Sent from my SM-G900V using Tapatalk
    I think your best bet is to wedge a screwdriver in there and try to manually lift the latch, it will be difficult, but it is way easier than anything else.
    Garage: 2008 Quartz Gray Audi A4Q 6MT
    Tuning: JHM Tuned Stage 2 93 Octane w/ IE HPFP

  6. #6
    Senior Member Three Rings nickbischoff's Avatar
    Join Date
    May 03 2011
    AZ Member #
    74983
    Location
    East Bay, California

    I wrote a DIY not too long ago on how to replace the rear seat belt tensioner, so its not exactly what you're looking for but I do remove the rear seat latch which should be all you need to replace yours.
    CURRENT: 2001 S4 Avant | Nogaro Blue | 6spd | Stage 2

    PAST: 2008 A4 Avant TI | Ibis White | 6spd | JHM Stage 3
    2008 S5 | Meteor Grey | 6spd
    2001 Allroad | Highland Green | tip
    2007 A4 TI | Brilliant Black | 6spd

  7. #7
    Senior Member Two Rings Mech_Mike412's Avatar
    Join Date
    Jul 06 2016
    AZ Member #
    375782
    Location
    Pittsburgh, PA USA

    Bump. I'm just gonna replace the unit but I need to remove the current one. How should I release it/remove it with it stuck latched?

    Sent from my SM-G900V using Tapatalk
    2008 Audi A4 Quattro S-Line 6MT
    K&N Filter - ECS Turbo Inlet Hose - ECS Vent Boost Gauge - GFB Diverter Valve - Morimoto 3000K HID Fogs - JHM Stage 1 93oct - CTS Charge Pipes - Custom Catback, CTS Mufflers

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2025 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.