interior door handles.

[nellys300zx]

hi guys. ive just purchased a set of illuminating interior door handles. just need to know how do i power these up. is it via the door marker lights, or via the park light feed. if its the park light feed is there a feed to the inside of the doors.
thanks all

[diagnosticator]

The original interior door handles have red LED illumination, right? If not, the window switches are illuminated you can tap into that circuit to power the LEDs in the door handles.

[nellys300zx]

The original interior door handles have red LED illumination, right? If not, the window switches are illuminated you can tap into that circuit to power the LEDs in the door handles.

hi buddy thank you for your reply. mine didnt have the illuminating door handles, would you happen to know what colour wire is for the switch illumination.
many thanks nelly.

[diagnosticator]

hi buddy thank you for your reply. mine didnt have the illuminating door handles, would you happen to know what colour wire is for the switch illumination.
many thanks nelly.

The door opener lighting power supply shows as the Blue/Brown wire at the door opener levers, connected in parallel with the switch lighting. There is a good chance the required power wires are already installed, just not connected yet.

[nellys300zx]

The door opener lighting power supply shows as the Blue/Brown wire at the door opener levers, connected in parallel with the switch lighting. There is a good chance the required power wires are already installed, just not connected yet.

hi mate thank you for the info, much appricated. going to give it ago over the weekend.