Should have used more zip ties

[Dan[FN]6262]

chopped up lower valence blew off when approaching 140mph.

scared the shit out of me, as loud as it was when it happened I thought I blew up the engine.

now I have a reason to order a S4 front cover.

[b5a4erik]

zip.

[a4kamila6]

Lol good shit

[Davdraco1]

Can I ask were you were doing 140???

[tar]

Can I ask were you were doing 140???

In Mexico

[Rodgman15]

In Mexico

I love me some Mexico roads!

[Dan[FN]6262]

I never said I was doing 140.

[tar]

I never said I was doing 140.

Ah I see the wordsmithing now. Technically 5mph is approaching 140

[Davdraco1]

Lmao

[GOODBYNAAIR]

zip ties are for drift cars that don't go "140'' they stay under 100 most the time, duck tape is for NASCAR they go 200 you should have used duck tape

[Dan[FN]6262]

You're right. Would go along with the shitty look my A4 is rocking.

[cclarkb5]

Do I wanna know how you recovered it?


Sent from my iPhone using Tapatalk

[Dan[FN]6262]

It was still hanging on at the passenger side end, the only end I used a zip tie on lol. Barely though, a light tug made it fall off

[tar]

zip ties are for drift cars that don't go "140'' they stay under 100 most the time, duck tape is for NASCAR they go 200 you should have used duck tape

Duck tape eh
http://duckbrand.com/products/duck-t...188-in-x-10-yd

[dougyfresh]

Hi dan!

[Dan[FN]6262]

DOUG! Hows it going man?! Hows the farm??

[Lazer Viking]

damn.. this thing is still alive?

how has my trunk held up all this time?

[Dan[FN]6262]

oh hell yeah. B5's don't die, they just get faster hahahahaha ... right? .. guys? ...

Still rocking the euro trunk! Still holding the licence plate on with one screw lmao.

[Lazer Viking]

nah, mine feels slower.. or maybe 22 year old me thought it was faster, not sure.

[ray4624]

nah, mine feels slower.. or maybe 22 year old me thought it was faster, not sure.

I can't believe you got it out again :)


Sent from my iPhone using Tapatalk

[Dan[FN]6262]

35psi FTW. Can't wait for this to show up.





Turned the boost up to 28psi last weekend. Holds it to redline, like always. A few days ago it started peaking at 25psi and settling at 23psi near redline. I noticed, while looking at old logs, that it is spooling slower than it use to. Replaced the spring in the MBC, lubed it up, serviced the recirculation valve and made sure there were no boost/vacuum leaks. After some tinkering around I decided the wastegate actuator was the culprit. Maybe the spring has weakened, or there is a small tear in the diaphragm. Either way, finally had a reason to order a High Boost canister!

[Lazer Viking]

I can't believe you got it out again :)


Sent from my iPhone using Tapatalk

Yaaaas, back at it!

[Bordom]

Surprised the Ziptie Bandit himself didn't comment in here

Everything graciously mispelled by Android