Audizine - An Automotive Enthusiast Community

Page 1 of 3 123 LastLast
Results 1 to 40 of 81
  1. #1
    Senior Member Two Rings crazy8smokey's Avatar
    Join Date
    Jun 30 2013
    AZ Member #
    118089
    Location
    Austin TX

    RS grill/SQ5 grill options

    Guest-only advertisement. Register or Log In now!
    I'm looking for options on changing out the grill on my 16 SQ5
    what are my options -if any ?
    I think I like the mesh still -I had it on my S4 -but cant seem to find one on line anywhere....ECS -did not have -other vender -did not have -who else shd I try ?...
    Would someone be so kind as to share a link
    or are there other options ?

    *FYI -I have a blk OP grill I would be putting up to sale or trade **

    thank you
    2016 SQ5 Stock ...sounds like its sold...
    SOLD-2011 B8 S4 -Stock....ok it wasn't stock :)

  2. #2
    Veteran Member Four Rings jomama229's Avatar
    Join Date
    Jun 07 2013
    AZ Member #
    116742
    Location
    orange county, ca

    you can buy it off ebay for sure. they're most likely from china, but they work fine. oddly, the grills are all made to fit the non-sline cars, so you'll need to trim the bottom piece off. search for the thread here about the install and you'll see what i mean. note that you have an option of chrome v. black surround, and also note that some don't come with the rings.
    2014 Q5 3.0T Glacier White Metallic - 034 Stage 2 / TCU - Bilstein B8/H&R

  3. #3
    Stage 2 Banner Advertiser Four Rings Jimminez@Nemesis's Avatar
    Join Date
    May 16 2007
    AZ Member #
    18061
    My Garage
    2020 Q7, 2021 RS6 Avant
    Location
    Ottawa CA / DE USA

    Quote Originally Posted by crazy8smokey View Post
    I'm looking for options on changing out the grill on my 16 SQ5
    what are my options -if any ?
    I think I like the mesh still -I had it on my S4 -but cant seem to find one on line anywhere....ECS -did not have -other vender -did not have -who else shd I try ?...
    Would someone be so kind as to share a link
    or are there other options ?

    *FYI -I have a blk OP grill I would be putting up to sale or trade **

    thank you
    I'd be interesting in the BO grille.

    034Motorsport | ABT | Advan | AG | Akrapovič | AWE | BBS | BC Forged | Brembo | Capristo | Deval | Forgeline | H&R | KW | Milltek | OZ | Sparco | Stoptech | Thule | Unitronic | Volk | Vorsteiner | Work | and many more



  4. #4
    Veteran Member Three Rings turbojayc's Avatar
    Join Date
    Sep 11 2015
    AZ Member #
    354905
    Location
    Toronto

    Quote Originally Posted by crazy8smokey View Post
    I'm looking for options on changing out the grill on my 16 SQ5
    what are my options -if any ?
    I think I like the mesh still -I had it on my S4 -but cant seem to find one on line anywhere....ECS -did not have -other vender -did not have -who else shd I try ?...
    Would someone be so kind as to share a link
    or are there other options ?

    *FYI -I have a blk OP grill I would be putting up to sale or trade **

    thank you
    RS Style grills do exist for the SQ5 in many colour combos. Just look on ebay or JC Sportline. I got mine from and installed by a local guy here in Toronto.

    Here is my all black grill to go with my BO package.

    2023 S3 - Daytona Grey Pearl | H&R Sport Spring | 19" Rotiform OZR | Unitronic Stage 1+
    2019 SQ5 - RETIRED
    2016 SQ5 - RETIRED

  5. #5
    Veteran Member Three Rings
    Join Date
    Jun 12 2015
    AZ Member #
    337226
    Location
    CA

    Bad. Ass.

  6. #6
    Veteran Member Four Rings jomama229's Avatar
    Join Date
    Jun 07 2013
    AZ Member #
    116742
    Location
    orange county, ca

    not the best pic nor the cleanest car, but here's a pic of my grille with the chrome surround and my ca legacy plate mounted. the grille was purchased from jcsportline in china on a group buy a while back, and the license plate mount was bought off amazon for like $5-7.

    2014 Q5 3.0T Glacier White Metallic - 034 Stage 2 / TCU - Bilstein B8/H&R

  7. #7
    Veteran Member Three Rings turbojayc's Avatar
    Join Date
    Sep 11 2015
    AZ Member #
    354905
    Location
    Toronto

    Quote Originally Posted by jomama229 View Post
    not the best pic nor the cleanest car, but here's a pic of my grille with the chrome surround and my ca legacy plate mounted. the grille was purchased from jcsportline in china on a group buy a while back, and the license plate mount was bought off amazon for like $5-7.

    What mount is that? I just recently put my plate on with black zip ties, as it's been twice now that I have been pulled over for no front plate. Grills been on for maybe 2 months. No tickets, just annoying to be bothered.
    2023 S3 - Daytona Grey Pearl | H&R Sport Spring | 19" Rotiform OZR | Unitronic Stage 1+
    2019 SQ5 - RETIRED
    2016 SQ5 - RETIRED

  8. #8
    Veteran Member Four Rings jomama229's Avatar
    Join Date
    Jun 07 2013
    AZ Member #
    116742
    Location
    orange county, ca

    Quote Originally Posted by turbojayc View Post
    What mount is that? I just recently put my plate on with black zip ties, as it's been twice now that I have been pulled over for no front plate. Grills been on for maybe 2 months. No tickets, just annoying to be bothered.
    it's a $5 license plate holder from amazon: https://www.amazon.com/Cruiser-Acces...6637349&sr=1-1

    i used some of the hardware that came with the grille to secure it, and doubly secured it with some zip ties. once the plate is screwed on, you don't see any of that ugliness. i forgot who here suggested this holder to me - it's been money!

    i originally ordered my car with plate delete. after moving to SF, i started getting tagged with no front plate fix-it tickets. it was become too much of a hassle so i got a new grille and mounted the holder.
    2014 Q5 3.0T Glacier White Metallic - 034 Stage 2 / TCU - Bilstein B8/H&R

  9. #9
    Veteran Member Four Rings tcm glx's Avatar
    Join Date
    Feb 11 2004
    AZ Member #
    214
    Location
    So Cal

    Quote Originally Posted by jomama229 View Post
    it's a $5 license plate holder from amazon: https://www.amazon.com/Cruiser-Acces...6637349&sr=1-1

    i used some of the hardware that came with the grille to secure it, and doubly secured it with some zip ties. once the plate is screwed on, you don't see any of that ugliness. i forgot who here suggested this holder to me - it's been money!

    i originally ordered my car with plate delete. after moving to SF, i started getting tagged with no front plate fix-it tickets. it was become too much of a hassle so i got a new grille and mounted the holder.
    Any chance you have the grill with the plate delete still? RS grill looks great BTW, especially with the legacy plate.
    2013 Audi Q5 2.0T Premium Ibis White/Chesnut Brown
    2018 Audi Q7 3.0T Glacier White/Nougat Brown

  10. #10
    Veteran Member Four Rings jomama229's Avatar
    Join Date
    Jun 07 2013
    AZ Member #
    116742
    Location
    orange county, ca

    Quote Originally Posted by tcm glx View Post
    Any chance you have the grill with the plate delete still? RS grill looks great BTW, especially with the legacy plate.
    thanks! waited like 3 months for the legacy plates. just need to get some black screws now.

    i do still have the plate delete grille. just for clarity sake, it's the Q5 3.0T s-line version (not SQ5). i kept it in case i wanted to return the car to stock, but would be willing to sell for cheap if you're interested. it's in very good condition. and fwiw, i'll be in socal next week, so if you're interested, let me know! you can give me a shout at sfmoy29 at gmail.
    2014 Q5 3.0T Glacier White Metallic - 034 Stage 2 / TCU - Bilstein B8/H&R

  11. #11
    Veteran Member Three Rings turbojayc's Avatar
    Join Date
    Sep 11 2015
    AZ Member #
    354905
    Location
    Toronto

    Quote Originally Posted by jomama229 View Post
    it's a $5 license plate holder from amazon: https://www.amazon.com/Cruiser-Acces...6637349&sr=1-1

    i used some of the hardware that came with the grille to secure it, and doubly secured it with some zip ties. once the plate is screwed on, you don't see any of that ugliness. i forgot who here suggested this holder to me - it's been money!

    i originally ordered my car with plate delete. after moving to SF, i started getting tagged with no front plate fix-it tickets. it was become too much of a hassle so i got a new grille and mounted the holder.
    Thanks.
    2023 S3 - Daytona Grey Pearl | H&R Sport Spring | 19" Rotiform OZR | Unitronic Stage 1+
    2019 SQ5 - RETIRED
    2016 SQ5 - RETIRED

  12. #12
    Senior Member Two Rings crazy8smokey's Avatar
    Join Date
    Jun 30 2013
    AZ Member #
    118089
    Location
    Austin TX

    perfect thank you for all the help
    2016 SQ5 Stock ...sounds like its sold...
    SOLD-2011 B8 S4 -Stock....ok it wasn't stock :)

  13. #13
    Established Member Two Rings
    Join Date
    Mar 31 2013
    AZ Member #
    112453
    Location
    Allen/TX

    turbojay and jomama... wow, completely changes (for the better) the look of the SQ5. Well done!
    '23 SQ5
    '18 BMW M5
    '03 SVT Lightning

  14. #14
    Veteran Member Three Rings turbojayc's Avatar
    Join Date
    Sep 11 2015
    AZ Member #
    354905
    Location
    Toronto

    Quote Originally Posted by WA 2 FST View Post
    turbojay and jomama... wow, completely changes (for the better) the look of the SQ5. Well done!
    Agreed, makes it look so much more mean. Thx.
    2023 S3 - Daytona Grey Pearl | H&R Sport Spring | 19" Rotiform OZR | Unitronic Stage 1+
    2019 SQ5 - RETIRED
    2016 SQ5 - RETIRED

  15. #15
    Veteran Member Four Rings jomama229's Avatar
    Join Date
    Jun 07 2013
    AZ Member #
    116742
    Location
    orange county, ca

    Quote Originally Posted by WA 2 FST View Post
    turbojay and jomama... wow, completely changes (for the better) the look of the SQ5. Well done!
    thanks! one additional not-so-obvious reason to like the honeycomb grill look is that it matches the fog light surround. btw, mine is a non-S Q5. i may be looking to unleash the beast with a tune at some point tho.
    2014 Q5 3.0T Glacier White Metallic - 034 Stage 2 / TCU - Bilstein B8/H&R

  16. #16
    Active Member Two Rings Tinchi's Avatar
    Join Date
    Jul 01 2016
    AZ Member #
    375501
    Location
    Aruba

    Hi turbojayc. Do you have more pictures of your Q???

  17. #17
    Veteran Member Three Rings
    Join Date
    Jun 12 2015
    AZ Member #
    337226
    Location
    CA

    Here's one of mine:


  18. #18
    Active Member Two Rings Tinchi's Avatar
    Join Date
    Jul 01 2016
    AZ Member #
    375501
    Location
    Aruba

    Tnx 👍🏼

  19. #19
    Veteran Member Four Rings Silverarrow240's Avatar
    Join Date
    Jul 10 2014
    AZ Member #
    263103
    Location
    Maryland

    Question... Did you guys have to black out any hardware or bumper supports behind the RS Grill?? I know the S4 guys with out BO have too...

    All Look AWESOME!!!!! This is high on my list.
    2016 RS7 Prestige Prism Silver Crystal Effect with black nappa with grey stitching | Carbon Optic, etc
    2015 SQ5 "Vader" Mythos Black | Black & Magma Red Nappa | Black Optics | B&O | Carbon Atlas | BBS CX-R 20x10 | H&R Springs | CTS Turbo Intake | AWE Touring Exhaust w/ Black Tips... Etc...
    2012 Audi A7 3.0TFSI Prestige Ice Silver/Blck/Aluminum
    2000 TT Quattro | Silver | Grey Nappa

  20. #20
    Veteran Member Three Rings
    Join Date
    Jun 12 2015
    AZ Member #
    337226
    Location
    CA

    Quote Originally Posted by Silverarrow240 View Post
    Question... Did you guys have to black out any hardware or bumper supports behind the RS Grill?? I know the S4 guys with out BO have too...

    All Look AWESOME!!!!! This is high on my list.
    Yes, I spray painted the crash bar and my AMS Alpha cooler matte black to make them disappear. The crash bar sits right behind the license plate holder. I think the front license plate, and its license plate holder are an eye sore on an otherwise beautiful vehicle.

  21. #21
    Veteran Member Three Rings turbojayc's Avatar
    Join Date
    Sep 11 2015
    AZ Member #
    354905
    Location
    Toronto

    Quote Originally Posted by Tinchi View Post
    Hi turbojayc. Do you have more pictures of your Q???
    Hey man, if you're on Instagram. Check out pics there.

    Sq5jayc
    2023 S3 - Daytona Grey Pearl | H&R Sport Spring | 19" Rotiform OZR | Unitronic Stage 1+
    2019 SQ5 - RETIRED
    2016 SQ5 - RETIRED

  22. #22
    Veteran Member Three Rings turbojayc's Avatar
    Join Date
    Sep 11 2015
    AZ Member #
    354905
    Location
    Toronto

    Quote Originally Posted by colby7 View Post
    Yes, I spray painted the crash bar and my AMS Alpha cooler matte black to make them disappear. The crash bar sits right behind the license plate holder. I think the front license plate, and its license plate holder are an eye sore on an otherwise beautiful vehicle.
    Basically what Colby said. I eventually put my front plate on, but really low on the grill as I was pulled over twice in just a short span with the RS grill. Cops can be real pains, for something so minor and ridiculous.
    2023 S3 - Daytona Grey Pearl | H&R Sport Spring | 19" Rotiform OZR | Unitronic Stage 1+
    2019 SQ5 - RETIRED
    2016 SQ5 - RETIRED

  23. #23
    Veteran Member Four Rings freesole's Avatar
    Join Date
    Oct 30 2011
    AZ Member #
    83235
    Location
    Seattle, WA

    How did you guys add the front license plate holder to the grill? Figure with zip ties that it would be hard to keep the holder level?

  24. #24
    Senior Member Three Rings
    Join Date
    Mar 13 2014
    AZ Member #
    155349
    Location
    Newcastle, England

    Euro SQ5
    C6 Carbon Interior, Exterior and Engine Bay
    Custom yellow stitch and yellow seatbelts
    StillStatic/AH Exclusive Race H&R with custom Air bags (25" ground to fender)
    Aiflift 3P Management
    C6 Carbon Chassis mods
    DTUK Tuned 370Bhp 774Nm
    Rotiform DUS 22x10.5

  25. #25
    Veteran Member Four Rings freesole's Avatar
    Join Date
    Oct 30 2011
    AZ Member #
    83235
    Location
    Seattle, WA

    How is that being held up (as in what is going behind the grill to hold it in place)?

  26. #26
    Registered User Four Rings
    Join Date
    Jun 25 2016
    AZ Member #
    375054
    Location
    DMV

    bracket / washer & bolt

  27. #27
    Senior Member Three Rings
    Join Date
    Mar 13 2014
    AZ Member #
    155349
    Location
    Newcastle, England

    Grill has a central mount point molded into it, I simply run a bolt through and a nut on the other side.

    you can just see the mount here

    Euro SQ5
    C6 Carbon Interior, Exterior and Engine Bay
    Custom yellow stitch and yellow seatbelts
    StillStatic/AH Exclusive Race H&R with custom Air bags (25" ground to fender)
    Aiflift 3P Management
    C6 Carbon Chassis mods
    DTUK Tuned 370Bhp 774Nm
    Rotiform DUS 22x10.5

  28. #28
    Veteran Member Four Rings freesole's Avatar
    Join Date
    Oct 30 2011
    AZ Member #
    83235
    Location
    Seattle, WA

    Hmm I am pretty sure there isn't such a mounting point on my grill haha.

  29. #29
    Veteran Member Three Rings DocTJ's Avatar
    Join Date
    Jul 29 2016
    AZ Member #
    377399
    Location
    PA

    Hey guys,

    So for those who have the rsq5 grill, any problems with paint quality etc when washing it? I usually use a power washer and don't want to damage the finish.

    Specifically the jc sport line rsq5 grill is the one I'm inquiring about.

  30. #30
    Senior Member Two Rings AUDuffer's Avatar
    Join Date
    May 20 2012
    AZ Member #
    93845
    Location
    Hawaii

    I haven't had any issues with mine.

  31. #31
    Senior Member Three Rings
    Join Date
    Sep 12 2016
    AZ Member #
    380842
    Location
    Natick/MA

    Yup no issues here too so far . Does seem pretty flimsy though


    Sent from my iPhone using Tapatalk

  32. #32
    Veteran Member Three Rings DocTJ's Avatar
    Join Date
    Jul 29 2016
    AZ Member #
    377399
    Location
    PA

    why flimsy?

    and thanks both for answering.

  33. #33
    Senior Member Three Rings
    Join Date
    Sep 12 2016
    AZ Member #
    380842
    Location
    Natick/MA

    It's plastic complete ..


    Sent from my iPhone using Tapatalk

  34. #34
    Veteran Member Three Rings chuthis's Avatar
    Join Date
    Nov 30 2012
    AZ Member #
    105018
    Location
    socal

    Anybody have a picture of a white SQ with an all black RS grille? Need help deciding haha.

    Also, is there any detailed info on what exactly needs to be trimmed/modified to make the grille fit?
    10' S4 | 14' SQ5

  35. #35
    Veteran Member Three Rings DocTJ's Avatar
    Join Date
    Jul 29 2016
    AZ Member #
    377399
    Location
    PA

    Quote Originally Posted by chuthis View Post
    Anybody have a picture of a white SQ with an all black RS grille? Need help deciding haha.

    Also, is there any detailed info on what exactly needs to be trimmed/modified to make the grille fit?
    this thread has a pic of the white with the black grill
    also tells in detail what needs to be adjusted:

    http://www.audiworld.com/forums/q5-s...nions-2878547/

  36. #36
    Veteran Member Three Rings chuthis's Avatar
    Join Date
    Nov 30 2012
    AZ Member #
    105018
    Location
    socal

    Quote Originally Posted by DocTJ View Post
    this thread has a pic of the white with the black grill
    also tells in detail what needs to be adjusted:

    http://www.audiworld.com/forums/q5-s...nions-2878547/
    Thanks! I need to check AW more often =X
    10' S4 | 14' SQ5

  37. #37
    Established Member Two Rings Hrp783's Avatar
    Join Date
    May 07 2014
    AZ Member #
    212117
    My Garage
    F-150 Larriett, Infiniti G35 sport
    Location
    Austin Texas

    Quote Originally Posted by IanSQ5 View Post
    Grill has a central mount point molded into it, I simply run a bolt through and a nut on the other side.

    you can just see the mount here

    What kind of front bumper is that?

  38. #38
    Senior Member Three Rings
    Join Date
    Sep 12 2016
    AZ Member #
    380842
    Location
    Natick/MA

    Quote Originally Posted by DocTJ View Post
    this thread has a pic of the white with the black grill
    also tells in detail what needs to be adjusted:

    http://www.audiworld.com/forums/q5-s...nions-2878547/
    If u wait 4 days I can shoot u mine


    Sent from my iPhone using Tapatalk

  39. #39
    Veteran Member Three Rings DocTJ's Avatar
    Join Date
    Jul 29 2016
    AZ Member #
    377399
    Location
    PA

    Quote Originally Posted by TITAN_Q5 View Post
    If u wait 4 days I can shoot u mine


    Sent from my iPhone using Tapatalk
    that would be great, thanks.

  40. #40
    Senior Member Two Rings AUDuffer's Avatar
    Join Date
    May 20 2012
    AZ Member #
    93845
    Location
    Hawaii

    Quote Originally Posted by chuthis View Post
    Anybody have a picture of a white SQ with an all black RS grille? Need help deciding haha.

    Also, is there any detailed info on what exactly needs to be trimmed/modified to make the grille fit?
    Here you go. Mine went straight in to my 2012 with no mods.


    Sent from my iPad using Tapatalk

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.