Audizine - An Automotive Enthusiast Community

Results 1 to 12 of 12
  1. #1
    Senior Member Two Rings mwmaroney1's Avatar
    Join Date
    May 08 2012
    AZ Member #
    93234
    My Garage
    2014 S6
    Location
    Denver, CO

    20X9 VMR V710 Like New

    Guest-only advertisement. Register or Log In now!
    SOLD

    Set of Gunmetal VMR V710 20x9 et35. Used for a few months on my C7 S6, no curb rash or scrapes. Selling the wheels only, NO TIRES. Condition 9/10 on all wheels, just a few minor nicks from install/removal. Will include VMR center caps as well as Audi center caps I fabricated to fit. Asking $1000 + shipping or local pickup in Denver area.



    Last edited by mwmaroney1; 10-07-2016 at 05:16 PM.

  2. #2
    Veteran Member Three Rings chrisdazzo's Avatar
    Join Date
    Aug 11 2015
    AZ Member #
    348334
    My Garage
    RAV4 Limited
    Location
    Mountains, CO

    How will these fit a 2016 S3? Also what are the tire measurements?
    Last edited by chrisdazzo; 06-09-2016 at 08:45 PM.
    '21 Ultra Blue x Black Nappa ▉SQ5
    Prem+ : S Sport : Black Optics : Carbon Atlas
    21" Black Optic Wheels : B&O Audio : S Beam
    034 Res-X Res Delete + X-Pipe : IE Polymer Intake
    12.5/15mm Spacers : 034 Trans Mount Insert
    35% Ceramic Tint : 3M Front PPF

    [_SQZME] : Previously: MKV Jetta 2.5, B8.5 A5, 8V S3, B9 A5 SB

  3. #3
    Veteran Member Four Rings madyspop's Avatar
    Join Date
    Nov 19 2005
    AZ Member #
    8874
    My Garage
    07 S8, 07 V10 Treg, 11 Stasis S4, 13 S6
    Location
    Central IL

    Quote Originally Posted by chrisdazzo View Post
    How will these fit a 2016 S3? Also what are the tire measurements?
    They won't fit, you need a 19" setup for the S3.
    13 S6 Glacier Stage 3 llllllll APR DP's l Akrapovic l EC sways, endlinks and Alu Kruez l 034 mounts l Garrett GTX2873 turbos l Custom ECU/TCU tune l 3m tint l CETE Bluetooth Lowering Module l Escort 9500ci built in radar/laser diffuser l AWE Gen 2 intake l Xpel l P3 Gauge l RS 6 Grill l E-codes l APR HE l Carbon Designs valance & mirror caps l Dynamic tails l facelift rear bumper l 20" BBS CX-R on Blizzaks l 20" HRE P101 on Mich PSS l 034 density mounts

  4. #4
    Senior Member Two Rings mwmaroney1's Avatar
    Join Date
    May 08 2012
    AZ Member #
    93234
    My Garage
    2014 S6
    Location
    Denver, CO

    Quote Originally Posted by chrisdazzo View Post
    How will these fit a 2016 S3? Also what are the tire measurements?
    Not sure on how they would fit, do you know your current wheel width and offset? The tires I had on there were 255/35/20.

    Sent from my SM-G920V using Tapatalk

  5. #5
    Senior Member Two Rings mwmaroney1's Avatar
    Join Date
    May 08 2012
    AZ Member #
    93234
    My Garage
    2014 S6
    Location
    Denver, CO

    Quote Originally Posted by madyspop View Post
    They won't fit, you need a 19" setup for the S3.
    TAG has a set of HRE 20x9 et 35 mounted on a S3 so apparently they can fit 20s. Different size tire used tho.

    Sent from my SM-G920V using Tapatalk

  6. #6
    Veteran Member Four Rings madyspop's Avatar
    Join Date
    Nov 19 2005
    AZ Member #
    8874
    My Garage
    07 S8, 07 V10 Treg, 11 Stasis S4, 13 S6
    Location
    Central IL

    Quote Originally Posted by mwmaroney1 View Post
    TAG has a set of HRE 20x9 et 35 mounted on a S3 so apparently they can fit 20s. Different size tire used tho.

    Sent from my SM-G920V using Tapatalk
    Oh I'm not saying they won't fit because they will. We ran my 20x9 HRE on my brothers S3 running a 30series tire. They worked but were just a bit big and really hurt the way the car drove.

    Those look so good on your S, why are you dumping them?
    13 S6 Glacier Stage 3 llllllll APR DP's l Akrapovic l EC sways, endlinks and Alu Kruez l 034 mounts l Garrett GTX2873 turbos l Custom ECU/TCU tune l 3m tint l CETE Bluetooth Lowering Module l Escort 9500ci built in radar/laser diffuser l AWE Gen 2 intake l Xpel l P3 Gauge l RS 6 Grill l E-codes l APR HE l Carbon Designs valance & mirror caps l Dynamic tails l facelift rear bumper l 20" BBS CX-R on Blizzaks l 20" HRE P101 on Mich PSS l 034 density mounts

  7. #7
    Senior Member Two Rings mwmaroney1's Avatar
    Join Date
    May 08 2012
    AZ Member #
    93234
    My Garage
    2014 S6
    Location
    Denver, CO

    Quote Originally Posted by madyspop View Post
    Oh I'm not saying they won't fit because they will. We ran my 20x9 HRE on my brothers S3 running a 30series tire. They worked but were just a bit big and really hurt the way the car drove.

    Those look so good on your S, why are you dumping them?
    Picked up a set of FF01's so I don't really need them. Wife won't let me keep 3 sets of wheels for some reason?

    Sent from my SM-G920V using Tapatalk

  8. #8
    Veteran Member Four Rings madyspop's Avatar
    Join Date
    Nov 19 2005
    AZ Member #
    8874
    My Garage
    07 S8, 07 V10 Treg, 11 Stasis S4, 13 S6
    Location
    Central IL

    Quote Originally Posted by mwmaroney1 View Post
    Picked up a set of FF01's so I don't really need them. Wife won't let me keep 3 sets of wheels for some reason?

    Sent from my SM-G920V using Tapatalk
    What do you mean you can't have three sets? Thats not overdoing it, my dumb ass has 4 sets right now! I bet she has more than three pairs of shoes...
    13 S6 Glacier Stage 3 llllllll APR DP's l Akrapovic l EC sways, endlinks and Alu Kruez l 034 mounts l Garrett GTX2873 turbos l Custom ECU/TCU tune l 3m tint l CETE Bluetooth Lowering Module l Escort 9500ci built in radar/laser diffuser l AWE Gen 2 intake l Xpel l P3 Gauge l RS 6 Grill l E-codes l APR HE l Carbon Designs valance & mirror caps l Dynamic tails l facelift rear bumper l 20" BBS CX-R on Blizzaks l 20" HRE P101 on Mich PSS l 034 density mounts

  9. #9
    Established Member Two Rings Infantry52's Avatar
    Join Date
    Aug 18 2015
    AZ Member #
    349881
    Location
    Van Buren/Ar

    are you running any spacers? Also in these pictures are you on any lowering mod?

  10. #10
    Senior Member Two Rings mwmaroney1's Avatar
    Join Date
    May 08 2012
    AZ Member #
    93234
    My Garage
    2014 S6
    Location
    Denver, CO

    No spacers, et 35 leaves a pretty nice edge finish for the s6. It is lowered via vag com in these pics.

    Sent from my SM-G920V using Tapatalk

  11. #11
    Senior Member Two Rings mwmaroney1's Avatar
    Join Date
    May 08 2012
    AZ Member #
    93234
    My Garage
    2014 S6
    Location
    Denver, CO

    Bump
    Last edited by mwmaroney1; 06-22-2016 at 11:14 AM.

  12. #12
    Senior Member Two Rings mwmaroney1's Avatar
    Join Date
    May 08 2012
    AZ Member #
    93234
    My Garage
    2014 S6
    Location
    Denver, CO



    Sent from my SM-G920V using Tapatalk

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.