Audizine - An Automotive Enthusiast Community

Results 1 to 9 of 9
  1. #1
    Veteran Member Four Rings SteveKen's Avatar
    Join Date
    Jan 11 2005
    AZ Member #
    4802
    Location
    Pittsburgh, PA
    Items for Sale

    C5 RS6 Manual Conversion Adapter Kit - Includes Flywheel, Starter, Engine Adapter, HW

    Guest-only advertisement. Register or Log In now!
    For sale is a kit for allowing the RS6 to mate with the 01E transmission.

    Kit includes:

    1. Steel flywheel (~20 lbs) which is designed to work with the clutch P/N for a 2.7T dual mass flywheel.

    2. Custom starter, as the stock starter will interfere with he block (and no one wants to grind away material on the block that's pretty much exclusive to just the RS6)

    3. Engine - Trans adapter ring that bolts up to the 01E prior to mating to the engine.

    4. Hardware to be used in conjunction with a few of the stock bolts for mating the engine to the transmission. (In all, 13 bolts hold the engine and transmission together)

    5. Detailed instructions.



    All custom parts were professionally designed by 3D laser scanning teh RS6 block and 01E. Engine - Trans adapter and starter nose are CNC'd from 6061 aluminum.

    $2250 shipped CONUS

    Delivery within 1 week of payment
    Last edited by SteveKen; 06-09-2016 at 05:52 PM.
    Steve

    2016 GTI • 2001 Golf 2.Slow • 2001 Racing Green S8
    2004 S4 Avant 6MT 2.7T • 1977 Honda CB750 F2

    2003 Audi RS6 (6 speed conversion) - SOLD
    2002 Black S6 (RS6 body, drivetrain & 6 speed conversion) - SOLD
    2002 Silver S6 (6 speed conversion) - SOLD
    Too many B5 S4s - SOLD

  2. #2
    Established Member Two Rings
    Join Date
    May 21 2011
    AZ Member #
    75795
    My Garage
    b5 4.2
    Location
    Atlanta, GA
    Items for Sale

    I'd love to know where I can get that starter motor adapter. I am doing a swap using the same pattern v8 block.

  3. #3
    Veteran Member Four Rings LittleDozer's Avatar
    Join Date
    Jan 21 2014
    AZ Member #
    139664
    My Garage
    C5 RS6, B8 A4 Avant, 2010 Yukon Denali
    Location
    Minneapolis, Minnesota

    What would this kit run without the flywheel?
    2004 Misano RS6 In Progress - Porsche GT3 Bosche Injectors / 3" Catless Downpipes / AMD Intercoolers / AMD E85 Tune / AMD 'Tip Chip' / KW V1 / Hotchkis F&R Sway / Moog End Links / Wagner Fog Delete / Flat Bottom Steering Wheel / Gunmetal TSW Bathurst 19x8.5 with 255 Indy 500s / 30% Tint 50% Windshield / Dension BT Module

    01E swap purchased, collecting the remainder of bits needed

    Gone and missed: Black Pearl C6 A6 4.2FSI, Full bolt-on Monsoon B8.5 S4

  4. #4
    Veteran Member Four Rings SteveKen's Avatar
    Join Date
    Jan 11 2005
    AZ Member #
    4802
    Location
    Pittsburgh, PA
    Items for Sale

    it will not run without the flywheel. it is custom made with the correct reluctor orientation and 2.2 mm thicker to make up for the added 2.2 mm thickness of the adapter. it is compatible with any clutch and pressure plate that is used for the 2.7T dual mass flywheel.

  5. #5
    Veteran Member Four Rings SteveKen's Avatar
    Join Date
    Jan 11 2005
    AZ Member #
    4802
    Location
    Pittsburgh, PA
    Items for Sale

    The only other block with this same pattern would be from a D3 A8. If not, chances are that the starter nose will not work for your application.

  6. #6
    Registered Member One Ring
    Join Date
    Apr 03 2018
    AZ Member #
    416536
    Location
    England

    id like to buy a manual conversion kit for my rs6 plus, that's on its second torque convertor in 18months lol

  7. #7
    Veteran Member Four Rings LittleDozer's Avatar
    Join Date
    Jan 21 2014
    AZ Member #
    139664
    My Garage
    C5 RS6, B8 A4 Avant, 2010 Yukon Denali
    Location
    Minneapolis, Minnesota

    Quote Originally Posted by SteveKen View Post
    it will not run without the flywheel. it is custom made with the correct reluctor orientation and 2.2 mm thicker to make up for the added 2.2 mm thickness of the adapter. it is compatible with any clutch and pressure plate that is used for the 2.7T dual mass flywheel.
    Just to confirm, the Clutch Master flywheel made for manual swapped C5 RS6 isn't compatible with your spacer/adapter? https://www.fastaudi.com/store/Clutc...heel-p57656090
    2004 Misano RS6 In Progress - Porsche GT3 Bosche Injectors / 3" Catless Downpipes / AMD Intercoolers / AMD E85 Tune / AMD 'Tip Chip' / KW V1 / Hotchkis F&R Sway / Moog End Links / Wagner Fog Delete / Flat Bottom Steering Wheel / Gunmetal TSW Bathurst 19x8.5 with 255 Indy 500s / 30% Tint 50% Windshield / Dension BT Module

    01E swap purchased, collecting the remainder of bits needed

    Gone and missed: Black Pearl C6 A6 4.2FSI, Full bolt-on Monsoon B8.5 S4

  8. #8
    Veteran Member Four Rings
    Join Date
    Nov 14 2013
    AZ Member #
    130116
    Location
    earth
    Items for Sale

    Steve are these kits made to order or
    are they always available? Also is it not
    possible to run a single mass flywheel with this setup? What’s the strongest clutch & flywheel setup you can run with
    your kit?

  9. #9
    Senior Member Three Rings Wide-66's Avatar
    Join Date
    Jun 17 2011
    AZ Member #
    77041
    My Garage
    2003 A4--2.7t, 1966 Porsche 911 w/ 996 swap, 1969 corvette, 1967 Camaro
    Location
    NH

    His FW is single mass steel. The FW is very nice it is made by aasco (or at least the one i got). I am using an AMD stage plus clutch and it has been great. Steve got me out the kit very fast maybe a week max. Whatever you do dont buy the TTV it is a pile of shit. It will bolt up but the tone ring is machined wrong.



Tags for this Thread

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2018 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.