Fuel Filter swap...No start

**mosnet99** · 06-02-2016 03:46 PM

1.8 taq, verified no leaks. "Motor side is pointing towards motor, line with blue clip is on middle nipple in the back & line with black clip on the other one. While removing the old one I did twist the line with the blue clip a bit but immediately squeezed it back to the right form. Primed the fuel pump a few times & after 5 tries still no start. Put my fingernail in the Schrader valve on the fuel pump & barely any pressure came out. Any suggestions?

Sent from my LG-H811 using Tapatalk

**customa4** · 06-02-2016 04:13 PM

Maybe mixed up the connections when reinstalling the filter.

**old guy** · 06-02-2016 04:46 PM

Are you positive you got the hoses in the correct ports? On the front side the skinny hose goes in the center port. On the back side the hose with the blue clip goes in the center port.

**mosnet99** · 06-02-2016 04:53 PM

Originally Posted by old guy

Are you positive you got the hoses in the correct ports? On the front side the skinny hose goes in the center port. On the back side the hose with the blue clip goes in the center port.

Okay I'm going to check the front hoses. The rear is correct.

Sent from my LG-H811 using Tapatalk

**mosnet99** · 06-02-2016 05:19 PM

Originally Posted by old guy

Are you positive you got the hoses in the correct ports? On the front side the skinny hose goes in the center port. On the back side the hose with the blue clip goes in the center port.

Feel like a dumbass...seems like I make all my mistakes working in the dark, fighting against time. Gonna get some lighting in my garage lol. Thanx OG

Sent from my LG-H811 using Tapatalk