Manwagon with new shoes

[mudd1011]

Sent from my iPhone using Tapatalk

[nyc joe]

Looking good.


Thanx
-Joe

[ZERO FRAME GRAB]

She does look good, what series tires are you running?

[gcoy]

Lookin Good !!!

[moe.ron]

Are those avant gardes? m510?

[mudd1011]

m580's staggered. 19.9.5 rear and 19x8.5 front. all on 245 size tires, so not really staggered per se

pic of rear

[moe.ron]

They look great. Is the finish hyper silver or satin silver?

[mudd1011]

i believe they are satin silver. I really like them. I so wanted to have 9.5 in the front, but wasn't ready to deal with fender pulling, adjustable upper control arms, etc. Got them from Jason at Get Your Wheels.com. He was very patient with me and my ridiculous amount of questions

[malathion]

Very nice, but you could have easily pulled off 9.5's up front so both front and rear would have the same amount of concave on the wheels.

here's my new setup: 19x9.5 et40 front, et35 rear. 235/35 Michelin PSS.

[mudd1011]

hmm, really? my tuning shop and Jason from getyourwheels.com said I wouldn't be able to do it without fender pulling/rolling/front camber adjustments. I think the issue is that I would need to add a 5mm spacer to the front to clear the brakes. Tuning shop said they tried many times with other cars. However, I'm not sure it was with these specific wheels.

[skrelnik]

Looks sick. Nice work!

So you were told that 9.5s up front would require a roll? I'm looking at a 9.5 square for my b7 avant but I'm now having second thoughts...these are VMR in particular, but I'll punt them if that's the case.

[mudd1011]

thank you.....yes, I was told by my tuning shop and Jason from getyourwheels.com. I read that staticuxo does get some rubbing up front.

i was wrong, I am staggered. 235x19x8.5 up front and 245x19x9.5 in the rear. Also, I just went to coils and I figured I would definitely have rubbing issues up front to go to the height that I wanted to be at. It does look awesome, but just too much effort for me.

Just look here http://www.audizine.com/forum/showth...ression-Thread

[dhcivic27]

Nice Avant man.

Not to thread jack, but I did a 20 x 9 et35 square set up on my B7 Avant. Rim to fender is super flush. Don't want to say that I didn't run into issues because I did. Camber issues just to clear the fender, heavy wheel set up and torn boots. Drive it low and slow.

[4point2]

Nice Dolphin! slightly biased of course but

I also just got new shoes and coils in. I was going to do 9.5s all round and heard the same issues about spacers required. apparently the spacers to clear the caliper might be just an S4 caliper thing. Anyway I chickened out and went 9" square et 40. I put 5mm spacers in the rear and cannot get my 5mm in the front without rubbing so I'm thinking I'm going to roll them to get back to flush. Tires are 225/35 19

[mudd1011]

Thanks. Just polished and waxed it


Sent from my iPhone using Tapatalk

[moe.ron]

Hnnnng

Sent from my SM-G925V using Tapatalk