Hi Guys,

Last week I got this P0191,g247 short to ground code. Traced the wiring and found a little nick, fixed it. After that another code shown up, it was P0190 which is g247 circuit malfunction.
Ordered new G247 with vin specific and replaced it.

Guess what, I heard rattle on my HPFP and my car thrown me another 3 codes.

P0652-002 sensor reference voltage B too low(G31,CMIIW)

P2127-002 G185 accelerator position sensor, signal too high

P0343-001 (G40) signal too high

I was so tired dealing with this problem, what odd is everytime I unplug the G247 socket those 3 codes above and the HPFP ticking is gone but still, and left me with G247 malfunction codes.

So with G247 plugged I will have 3 codes above. And with it unplugged it gives me G247 malfunction.

If anyone could help me I will be very gratefull and willing to paypal some$.

Thanks Audizine!


Sent from my iPhone using Audizine mobile app