How to fix this sensor??

[ecjr173]

Hey guys I think this is the outside temp sensor. I could be wrong. How can I go about fixing it. The wire broke all the way inside the plug. Or is there a replacement I can just buy.




Sent from my iPhone using Audizine mobile app

[iksnoved25]

Since you need to have that wire connected - get one from a part out. Cut yours off, solder both wires to the ones from the part out.

[Let it snow]

You just need to fix the connector. The sensor is probably okay. You can re pin the plug or maybe use this.

http://www.ebay.com/itm/VW-AUDI-2-PI...item33af3a1e6b

I could not find it on ECS with the pigtail. Look at the connector to make sure the part numbers match.

[customa4]

Since you need to have that wire connected - get one from a part out. Cut yours off, solder both wires to the ones from the part out.

Avoid soldering and use heat shrinkable butt connectors.

Like iksnoved said, easiest thing to do is just have someone clip theirs off of a partout. Most people will not be asking for that sensor so it should be an easy find on all of the part outs in the classified section.