Someone helpme with faulty code

[wsr1206]

Can someone figure out what is wrong with the codes?

I have Roc Euro intake and I have cleaned the filter about 3 month ago. I know the polution is kinda bad here but never had this problem before.

Thanks in advance


2 Faults Found:
6322 - Air Intake System
P307A 00 [096] - Flow too Low
Intermittent - Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 57325 km
Date: 2016.04.05
Time: 11:21:43

6307 - MAP/MAF <-> Throttle Position Correlation
P0068 00 [096] - -
Intermittent - Not Confirmed - Tested Since Memory Clear
Freeze Frame:
Fault Status: 00000001
Fault Priority: 2
Fault Frequency: 1
Mileage: 57325 km
Date: 2016.04.05
Time: 11:21:43

Readiness: 0000 0000

[chaos2984]

You need to fix 6307 and that will correct the other one. Since their is no MAF sensor it makes an educated guess with assumed values and the MAP sensors and TB angle. You can clear the codes and see if the TB needs cleaned and or do a TB relearn. And see if it comes back.

[dizzlesizzle]

pretty sure there was an extended warranty for this...they will clean your intake for free, not sure if they walnut blast of use some other cleaning agent. Put i am pretty sure 6307 was one of the codes which qualified.