This is the one! Tilton designed this clutch using Formula 1 technology. This is the baddest clutch available for VR6 Swap. Stock pedal feel, drives like stock, but when revved up and hot it will hold 1500+ ft lbs easy. It can also be rebuilt I believe 5-6 times. You will have a clutch that holds all the power you can make and drives completely like stock. It has no contact with the flywheel, so you'll never need to replace or re-face it. Same clutch underground racing turbo Lamborghini's run, same clutch 1200+whp 6 speed supra's run. This clutch will last you 5+ years easy with rebuilds. Hasn't had one, and won't need one for a long time. It's practically new. Links below show the products, and you can message me here.
This is the clutch:
https://store.034motorsport.com/tilton-2-plate-carbon-racing-clutch-for-audis.html
This is the flywheel:
https://store.034motorsport.com/flywheel-vr6-longitudinal-tilton-style.html
The only thing that will need to be replaced is the throwout bearing.
https://store.034motorsport.com/throw-out-bearing-tilton-and-other-multiplate-racing-clutches.html
This clutch and flywheel go for $4845 from 034, I'm asking $3750 or best offer which seems very fair since it's practically just broken in. Held 1000+whp on my Audi S4 very easily. Message me here with any questions or interest. Thank you
Reply With Quote
Bookmarks