Audizine - An Automotive Enthusiast Community

Results 1 to 8 of 8
  1. #1
    Active Member One Ring
    Join Date
    Apr 06 2016
    AZ Member #
    371420
    Location
    brooklyn ny 11236

    Need help stage 3 big brake bracket carrier

    Guest-only advertisement. Register or Log In now!
    HI NEW TO AUDIZINE I OWN A 2001 AUDI A6 2.7 STAGE 3 MANUAL I RECENTLY BROKE THE BRACKET CARRIER FOR MY BIG BRAKE SET UP WITH PORSCHE CALIPERS ON THE DRIVERS SIDE THE BRACKET IS FROM ECS TUNING BUT ITS DISCONTINUED AN DONT SELL IT NO MORE CANT FIND THIS ANYWHERE SO I CANT DRIVE IT SUCKS ANYBODY KNOW WHERE I CAN GET A REPLACEMENT ECS 1004 C IS THE PART NUMBER

  2. #2
    Veteran Member Four Rings krew53's Avatar
    Join Date
    Sep 15 2006
    AZ Member #
    11354
    My Garage
    2023 RS6 - 2013 B8.5 S4 - 2003 B6 1.8BT quattro
    Location
    Simi Valley, CA

    2013 Solar Orange S4
    6MT | APR stage 2+ Ultra | Eurocode Headers | APR CPS | Meisterwerk clutch | Milltek Exhaust (resonated) | KW V3 coilovers | HRE FF01 | Stoptech trophy BBK | Alu Kreuz | Eurocode Sway / Endlinks / Trans & Dif mount | LYKT Control arms | E-Codes | Eurocode Short Shifter | P3 Gauge | Vinyl roof / trim / blades | B&O / JL Sound system | Probably more..

  3. #3
    Senior Member Three Rings bpark1210's Avatar
    Join Date
    Jan 08 2016
    AZ Member #
    366892
    Location
    PNW N. of Seattle

    JHMotorsports

  4. #4
    Senior Member Three Rings bpark1210's Avatar
    Join Date
    Jan 08 2016
    AZ Member #
    366892
    Location
    PNW N. of Seattle

    Which caliper are you running 17z or 18z? I thought these were all a bolt on affair with a special shouldered nut? I looked at ECS's website and they don't mention anything about a bracket in their BBK setups?

  5. #5
    Veteran Member Four Rings V1nny's Avatar
    Join Date
    Dec 04 2012
    AZ Member #
    105252
    Location
    Arlington VA

    I suspect OP has older setup with 993/928 type caliper. These are pretty unique brackets.

    another example of ECS standing behind their product
    Last edited by V1nny; 04-06-2016 at 05:49 PM.

  6. #6
    Active Member One Ring
    Join Date
    Apr 06 2016
    AZ Member #
    371420
    Location
    brooklyn ny 11236

    Thx i called apikol an they said there brackets only fit over oem rotors i have cross drilled an slotted ones so im assuming its different gonna keep looking around or see if i can get one fabricated thx krew53 appreciated it

  7. #7
    Active Member One Ring
    Join Date
    Apr 06 2016
    AZ Member #
    371420
    Location
    brooklyn ny 11236

    Yeah its an older setup there new big break kits are different

  8. #8
    Active Member One Ring
    Join Date
    Apr 06 2016
    AZ Member #
    371420
    Location
    brooklyn ny 11236

    Im not sure will ge back shortly

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.