Audizine - An Automotive Enthusiast Community

Results 1 to 8 of 8
  1. #1
    Established Member Two Rings browncow's Avatar
    Join Date
    Mar 10 2015
    AZ Member #
    319703
    My Garage
    2014 Toyota Highlander
    Location
    Bakersfield, CA

    Enlaes front lip spoiler

    Guest-only advertisement. Register or Log In now!
    Anybody have the Enlaes carbon fiber front lip spoiler only? without the side skirts and rear diffuser?
    I'm a big fan of the front lip spoiler, but don't like the look for the rear diffuser or side skirts.

    My question is, does it look retarded w/ just the front lip spoiler minus the other parts?

    If anybody has such a setup, would you mind sharing a picture? front and side?

    Thanks.

  2. #2
    Veteran Member Four Rings adamazing's Avatar
    Join Date
    Apr 26 2014
    AZ Member #
    197242
    Location
    San Diego, CA

    I'm in the opposite boat as you. I prefer the rears and sides but loathe the front.


    What I;d really like, is for them to stop fucking around and get that damn trunk lip finished already.



    2013 A4 Quattro Green Black Iridescent / APR E85 Stage 2 / AG F421 Polished Copper / Eurocode FMIC + HFC / AWE Quad + CF Diffuser
    build / instagram / flickr




  3. #3
    Veteran Member Four Rings Cloudg8's Avatar
    Join Date
    Oct 10 2012
    AZ Member #
    102009
    My Garage
    Jeep
    Location
    Chicago/IL/USA

    Quote Originally Posted by adamazing View Post
    I'm in the opposite boat as you. I prefer the rears and sides but loathe the front.


    What I;d really like, is for them to stop fucking around and get that damn trunk lip finished already.
    Same

  4. #4
    Veteran Member Four Rings Party_Marty's Avatar
    Join Date
    Nov 02 2015
    AZ Member #
    363887
    My Garage
    Sector 9 Long-board, Rugby Kit
    Location
    In the woods

    Quote Originally Posted by adamazing View Post
    I'm in the opposite boat as you. I prefer the rears and sides but loathe the front.


    What I;d really like, is for them to stop fucking around and get that damn trunk lip finished already.
    AMEN
    ---------------------------------------------------------- IG: party_martyy ----------------------------------------------------------------------
    ---------------------2014 A4 - 6 Speed - Phantom Black Pearl -------------- Peep the Build ---------------------

  5. #5
    Veteran Member Four Rings JeriQo's Avatar
    Join Date
    Jul 08 2015
    AZ Member #
    341165
    Location
    Seattle

    DO NOT order from Need4Speed motorsports. 6 posters here has been left hanging for almost a year.
    2012 BB A4 P+ S-line Exterior |FBSW RS Paddles/Pedals|CR-15|AFE Filter|ECS inlet|S4 Dual Exhaust|Ace Convex 19x8.5|ECS 10mm rear|Solowerks S1

  6. #6
    Veteran Member Four Rings adamazing's Avatar
    Join Date
    Apr 26 2014
    AZ Member #
    197242
    Location
    San Diego, CA

    Quote Originally Posted by JeriQo View Post
    DO NOT order from Need4Speed motorsports. 6 posters here has been left hanging for almost a year.
    Eh, I'd like to clarify on this. It's not NFS that's the problem, it's Enlaes.

    NFS was taking initiative to broker the deal and present the interest to Enlaes to start production - they did that.
    Enlaes has been unresponsive and given a lack of visibility into the project state. Enlaes attends nearly every Targa Trophy event I got to... guess who didn't even show up to the last one two weeks ago? My frustration isn't with NFS, it's with Enlaes.

    Paul at NFS has already taken up responsibility on the shortfall here and offered everyone refunds while he presses on them.



    2013 A4 Quattro Green Black Iridescent / APR E85 Stage 2 / AG F421 Polished Copper / Eurocode FMIC + HFC / AWE Quad + CF Diffuser
    build / instagram / flickr




  7. #7
    Veteran Member Four Rings JeriQo's Avatar
    Join Date
    Jul 08 2015
    AZ Member #
    341165
    Location
    Seattle

    Quote Originally Posted by adamazing View Post
    Eh, I'd like to clarify on this. It's not NFS that's the problem, it's Enlaes.

    NFS was taking initiative to broker the deal and present the interest to Enlaes to start production - they did that.
    Enlaes has been unresponsive and given a lack of visibility into the project state. Enlaes attends nearly every Targa Trophy event I got to... guess who didn't even show up to the last one two weeks ago? My frustration isn't with NFS, it's with Enlaes.

    Paul at NFS has already taken up responsibility on the shortfall here and offered everyone refunds while he presses on them.
    thanks for shedding some light.

    and apologies to paul
    2012 BB A4 P+ S-line Exterior |FBSW RS Paddles/Pedals|CR-15|AFE Filter|ECS inlet|S4 Dual Exhaust|Ace Convex 19x8.5|ECS 10mm rear|Solowerks S1

  8. #8
    Established Member Two Rings NorthWestB8's Avatar
    Join Date
    Jan 03 2016
    AZ Member #
    366656
    Location
    Renton WA

    ECS has CF trunk lip as well

    https://www.ecstuning.com/Audi-B8_A4...ler/ES3071996/

    I am ordering this to match my CF hood and what will soon be CF lower valance, its an option.
    | B8 2.0T | APR Stage 1 | VMR V701 19x9.5 | 15% Tint | AFE Intake | 034 Test/Catless Pipe | Resonator Delete | RS4 Grille | OSIR CF Hood |

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.