Will these wheels fit my rs4 outlaw?

[slowrideBC]

Rs6 aluminum uprights
Oem rs4 front and rear fenders, not pulled
18z 6 piston fronts / b6 s4 rears

Wheels in question

Enkei nt03-m
18x10.5
Et 30

I'm wondering how they will fit and if they will clear my brakes, before I pull the trigger. I've searched and came up with 18x10 et20 is ideal, just not sure about my front brakes clearing. I'm waiting on the seller to send me a hub to spoke measurement. Any ideas ?

http://www.audizine.com/forum/showth...s-amp-RAD-lugs

[landfill]

I had 18" enkei rpf1's at ET35 and
it cleared 18'z with 350mm rotors
no problem. No spacers. ET25-35 and you should be good. At et 35 on a x8" wheel I was flush with the fenders. With widebody you can probably get away with a lower ET but also since you're running 10.5" wide you have to consider that as well.

Badass build by the way.
I'm happy you kept the shell.

[slowrideBC]

Yeah I have the same rpf1s as you and I also had the 18x9 which did not clear. I just sent enkei a template for the 18z and they are sending me back what fits.

Thanks landfill. It's been a long and expensive road and it's finally almost complete