enjoy!

[Quattrors4]

[IMG][/IMG]
click on picture for video

[IMG][/IMG]

will brake 700 plus awhp next week

tomatoe you still wanna race ?lol

[65vetteC6]

So how much faster is this than before, I can't see it on the sheet.

[Quattrors4]

So how much faster is this than before, I can't see it on the sheet.

faster

[Kambesama]

What stage is this?

[FulhamFTW]

So how much faster is this than before, I can't see it on the sheet.

It's approximately $10,000 faster. Get your down payment in now.

[Quattrors4]

What stage is this?

stage 1.5

[Kambesama]

stage 1.5

I was hoping it would have made a little more considering you did say stage 2 will produce 1000 HP

[Quattrors4]

I was hoping it would have made a little more considering you did say stage 2 will produce 1000 HP

we should brake 700 awhp on the 1.5,but stage 2 needs full engine built to make 1000 whp

[daytonars4]

[IMG][/IMG]
click on picture for video

[IMG][/IMG]

will brake 700 plus awhp next week

tomatoe you still wanna race ?lol

It's very likely he still wants to race you. The only question is whether or not this time you'll come up with another lame excuse as to why you can't.lol

[Peter1.8t]

It's very likely he still wants to race you. The only question is whether or not this time you'll come up with another lame excuse as to why you can't.lol

I'd say all he is interested in is driving to parking lots and airing out at car shows

Regardless, I'd run Mario from a dig if he were closer. He wouldn't show anyways since he is all deceiving talk.

[Quattrors4]

I'd say all he is interested in is driving to parking lots and airing out at car shows

Regardless, I'd run Mario from a dig if he were closer. He wouldn't show anyways since he is all deceiving talk.

your amd imean aviva kit rs4 yould not stand a chance agains my car
no offence man but i make way more power

[bangoman]

your amd imean aviva kit rs4 yould not stand a chance agains my car
no offence man but i make way more power

Only one way to prove it

[Quattrors4]

Only one way to prove it

new england dragway next sunday ,comon down

[Corbett]

new england dragway next sunday ,comon down

At the very least can SOMEONE go there and verify his times. Lol

[Flying Tomatoes]

Here we go with this crap again. This is the same amount of power you have been claiming for a year and you still haven't gotten with in two bus lengths of any of the supercharged car times. When people were ready to race you last year it was all excuses and your dashboard was lit up like a Christmas tree. Now you want to call people out and expect them to drive 4 hours and expect it not to be the same story? No thanks. Cut the shit already and prove something before calling out the whole world. It's getting old.

[Quattrors4]

Here we go with this crap again. This is the same amount of power you have been claiming for a year and you still haven't gotten with in two bus lengths of any of the supercharged car times. When people were ready to race you last year it was all excuses and your dashboard was lit up like a Christmas tree. Now you want to call people out and expect them to drive 4 hours and expect it not to be the same story? No thanks. Cut the shit already and prove something before calling out the whole world. It's getting old.

come down and race agains me next sunday ,tow it down just incase you break down
you see now you are chicken ,but i don't blame you you know as good as me that my car will destroy your car
and no last summer i was running the car at 500 awhp and broke your trap sleep by a far margin,you can't win sorry man

[EUROSWAGR]

You called him out, how about you come to Island or ATCO?

[Quattrors4]

You called him out, how about you come to Island or ATCO?

i will!!l also with 2 twin turbo cars

[Mr.Wrong]

Nobody has to drive anywhere to meet anybody, although it would be the ultimate case scenario. It's so much easier than that. Go to a certified drag strip and lay down better or comparable times than Flying Tomatoes time or any other sc kit time and post a video and a full time slip. Good luck!

[Peter1.8t]

You won't. In all actuality, there's a better chance of me driving across the United States and going to ATCO. You still haven't verified any of your previous times, is it really that difficult to take a proper picture? You literally evade everything thrown your direction. The only reason I can think of is that your kit doesn't perform as advertised. With that much power you should be deep into the 10's. So far you aren't even close to that.

[NYC_Legacy]

Your all forgetting that the rear spoiler adds about another 100hp

[Quattrors4]

Nobody has to drive anywhere to meet anybody, although it would be the ultimate case scenario. It's so much easier than that. Go to a certified drag strip and lay down better or comparable times than Flying Tomatoes time or any other sc kit time and post a video and a full time slip. Good luck!

I already had better times then tomatoes

[JimmyBones]

I already had better times then tomatoes

Yet never posted so they don't exist as far as we are concerned.

[Blackstallion]

I already had better times then tomatoes

Open your little treasure chest and post them -- throw in a bottle of bleach in picture for proof too...

[Quattro_The_Dog]

Seems very tame on the rollers, TurboBrian must have great straps to hold all 640 whp perfectly still.

[zdriver]

I don't have an Audi currently but I'll GoPro some runs with my 335i if you want

[turbobrian]

It was strapped down nice and tight, prob took away a few hp doing this when you leave the car looser it will make a little more power. Not a lot maybe 2-3 hp difference sometimes, mostly the fwd stuff has that happened.

Here is a video not the best I know.

https://www.youtube.com/edit?video_r...id=0pKq4SN3HQQ

We will prob go to the local dynojet at some point and get a number as well. Just to make sure and to squash any doubt. Who knows maybe my dyno is off a couple hundred Hp I use it as a tool and not so much for some number. But it's nice to show that it's making some good power at only 12 psi.

[zmw]

Seems very tame on the rollers, TurboBrian must have great straps to hold all 640 whp perfectly still.

My GT-R made close to 900 at the tire and barely skated around at all, but it sure did come on much much quicker and angrier than that...

[str8blst]

Here we go with this crap again. This is the same amount of power you have been claiming for a year and you still haven't gotten with in two bus lengths of any of the supercharged car times. When people were ready to race you last year it was all excuses and your dashboard was lit up like a Christmas tree. Now you want to call people out and expect them to drive 4 hours and expect it not to be the same story? No thanks. Cut the shit already and prove something before calling out the whole world. It's getting old.

2nd....

[dsgray16]

How many times do we have to put up with this guy boasting about his builds while providing no evidence of results?? Think we need a new forum rule or something to address this!

[turbobrian]

How many times do we have to put up with this guy boasting about his builds while providing no evidence of results?? Think we need a new forum rule or something to address this!

What other results do you want?

[dsgray16]

What other results do you want?

Time slips as others have mentioned.. Videos of runs.. The video and pics in the first post don't load for me.. Anybody else having that issue?

Also, sorry if I missed it, but are you guy tuning this setup? What's your relation to OP?

[Kambesama]

Time slips as others have mentioned.. Videos of runs.. The video and pics in the first post don't load for me.. Anybody else having that issue?

Also, sorry if I missed it, but are you guy tuning this setup? What's your relation to OP?

If i remember right hes using TurboBrian shop to do all the fab work, build, and dyno. They're pretty much partners in this build

[FastEddie]

If i remember right hes using TurboBrian shop to do all the fab work, build, and dyno. They're pretty much partners in this build

Not all the fab work. Iron Alterations started, then turbobrian, then john reed tuned, then some magic tuner he will not say but i am sure is Jeff Atwood from UM

[Quattro_The_Dog]

It was strapped down nice and tight, prob took away a few hp doing this when you leave the car looser it will make a little more power. Not a lot maybe 2-3 hp difference sometimes, mostly the fwd stuff has that happened.

Here is a video not the best I know.

https://www.youtube.com/edit?video_r...id=0pKq4SN3HQQ

We will prob go to the local dynojet at some point and get a number as well. Just to make sure and to squash any doubt. Who knows maybe my dyno is off a couple hundred Hp I use it as a tool and not so much for some number. But it's nice to show that it's making some good power at only 12 psi.

Hi Brian, I was kinda messing with you, because I felt your questions in my thread were a bit strange and sheepish. However I asked the builder of my kit about you and he said he knows you from the Evo world and that you and your shop are legit. So I will bow out, if you say it makes 640 wheel, I believe it. Good work guys.

[Kambesama]

Not all the fab work. Iron Alterations started, then turbobrian, then john reed tuned, then some magic tuner he will not say but i am sure is Jeff Atwood from UM

Ah okay. Well now that they have they're first customer. The question remains how much will this cost? Is it still being kept at the original price of $30,000 or is it part of the non disclosed information?

[Corbett]

What other results do you want?

What is the best 1/4 mike time the vehicle has had to date? And are there any videos or time slips to prove it?

[65vetteC6]

Not all the fab work. Iron Alterations started, then turbobrian, then john reed tuned, then some magic tuner he will not say but i am sure is Jeff Atwood from UM

Pretty sure brain tunes it. UM typically requires cars on site don't they? And Mario has said brain was tuning it somewhere.

I wouldn't be surprised if Brian and his shop are legit. You don't get fab skills like that as a hobby. Vigo just has a shit rep and makes retarded claims and doesn't back much of anything up.

[turbobrian]

Hi Brian, I was kinda messing with you, because I felt your questions in my thread were a bit strange and sheepish. However I asked the builder of my kit about you and he said he knows you from the Evo world and that you and your shop are legit. So I will bow out, if you say it makes 640 wheel, I believe it. Good work guys.

Cool, But I will prove whatever you guys want. It's not hard to prove things. Some day when I have time like I said ill bring to another shops dyno as well. Prob a Dynojet so we can add another 90+ hp for the haters :-)

[turbobrian]

Ah okay. Well now that they have they're first customer. The question remains how much will this cost? Is it still being kept at the original price of $30,000 or is it part of the non disclosed information?

About that installed depends what you want. Its a lot of work, a lot of parts all the best quality, nothing is cheap about this. If someone can do it less they are more than welcome but for me to do this on my time and the parts I choose the price is what it is. I don't think anyone on here has the slightest clue about what it takes to build this twin turbo system.