:: Excelerate Performance :: Exclusive Distributor MSS Spring Kits 8V A3/S3 PRE ORDER

[XLR8 Craig]

Excelerate Performance is proud to announce our official launch as the North American Distributor for MSS Kits!







MSS KITS designs and brings to market a range of Premium Fully Adjustable Performance Spring kit products for prestige German sports cars marketed under our MSS Spring Kits brand. Our spring kits products replaces the factory (OE) parts yet retains the passive or active dampers – such as the Audi MagneRide™, VW ACC/DCC™, BMW EDC™ or Porsche PASM/S™.


Key benefits MSS products introduces are the following;

- Available in a choice of Streets, Sports or Track versions.
- Each product is designed to be a direct replacement for the factory (OE) part and requires no modifications.
- Our products will not introduce Noise, Vibration and Harshness (NVH) nor Check Engine Light (CEL) errors.
- Each kit is shipped with a Lifetime Warranty underlining the confidence we place in our products.




By believing in the principle of keeping a car looking as it did when leaving the factory.
It is our single guiding focus and we make the following five promises to our customers of the MSS Spring Kits products:

- Reduced dive on braking or reduced squatting on acceleration
- Keep the original factory dampers
- Gain advanced car setup comparable to aftermarket premium Coilover kits
- Improved ride comfort compared to the original factory suspension setup
- Retain the ‘in-dash’ functionality to change the suspension settings for cars equipped with electronic dampers



Product fitments
– Audi S3/RS3 8V
– Audi A3/Cabriolet
– VW Golf MK7 R
– VW Golf MK7 GTi





What kind of drop should I expect?
- Standard kits see fixed 10mm drop in the front and rear is adjustable to 30mm below stock height
- Fully Adjustable kits are adjustable from 10-30mm below stock height front and rear


Which kit suits you and your cars driving habits?




Questions?


Call Us!
E-mail Us!

Payment and Shipping Details

In order to participate in this Pre-Order we will require a non-refundable
deposit of $250. We are doing this because we are bulk ordering these for stock
and want to be fair to everyone.

Deposits can be sent via Paypal to www.paypal.me/excelerate/250
or Credit Card over the phone only.
Balance due must be paid before items ship.
Balance is due after one week of closing date or your order will be cancelled.


FREE SHIPPING applies to to cont. 48 US. Only. All US orders ship UPS

Canadian Orders please provide postal code in PM for quote. All orders to Canada will ship via USPS.

Timeline
VW Suspension Kits are due to arrive in May
Audi Suspension Kits are due to arrive in June.







CALL TO ORDER
203-483-6100
PRE ORDER SALE ENDS MARCH 31, 2016



Check Us Out on Social Media!

[mroberte]

I'm so jealous!! Really wanted these from all the rave reviews TT owners were saying last year during your Kickstarter. Glad they are finally available!

Sent from my SM-N910V using Tapatalk

[DarkSideGTI]

1.18" drop max? Got any pics of a car lowered all the way down?

[JohnnyUtah787]

Anyone used MSS before?

[949]

1.18" drop max? Got any pics of a car lowered all the way down?

if its set way too low, the shocks are going to bottom out. the key to go lower is to modify the top hats for the shaft to sit in, so it can be higher than stock position. the spring still sits where you set it. the idea is to raise the shocks shaft higher only. then at that point the shock will have more travel when the car is dropped. Honda's do this all the time but no real parts for the audi S3 yet.

when this is done properly, there will be no more bounce feel or premature shock wear.

something similar to these front and rear top hats for other cars:

[DarkSideGTI]

sometimes too much travel is bad though as you can damage fenders if the sprint compresses too much.

[949]

sometimes too much travel is bad though as you can damage fenders if the sprint compresses too much.

incorrect. if it has more travel, it wouldn't cause the tire to compress that much and if I remember its only the shaft that goes up higher not the spring. if your already going to be up in the fender it wouldn't matter anyways, but the spring does stay where you set it. this is only to save that extra 1 inch of travel from deep bumps causing bottoming out, not for the springs to sit higher.

In addition, this is not new. its been out on the market for many years now and it does work. I'm only sharing the info for those who may not know.

[DarkSideGTI]

gotcha, I was thinking the spring itself sat higher too.

[949]

gotcha, I was thinking the spring itself sat higher too.

oh no it separates it. yeah I didn't want someone else thinking that too.

its a really cool idea. a lot of knock offs have also been made for these other cars.
its pretty cheap to make so they sell a ton of them.
some give a lot more and allows the cars to be slammed and still ride like stock. you would never know it when driving it.

[XLR8 Craig]

I'm so jealous!! Really wanted these from all the rave reviews TT owners were saying last year during your Kickstarter. Glad they are finally available!

Sent from my SM-N910V using Tapatalk

So are we, this has been a long time coming and it was tough to keep things a secret when you knew something great was coming.

1.18" drop max? Got any pics of a car lowered all the way down?

I will have to inquire with MSS about this. When our test sets arrive I will be sure to get this for you.

Anyone used MSS before?

Head over into the MK2 TT forum there should be some information floating around. We have a lot of TT customers raving about these kits. If you are looking for someone to speak with about them, im sure I can put you in touch with one of our local TTRS customers.

[XLR8 Craig]

COUPON CODES ACTIVE!

• VW MK7 MSS Kits Promo Code - MK720
• Audi 8v MSS Kits Promo Code - Audi30

Enter in your vehicle info and away you go! Listed by kit type and sub categorized by spring rate.

http://vag.excelerateperformance.com...s/b-13946.aspx

[XLR8 Craig]

A lot of interest coming in for these kits. Thanks everyone for all the inquires, cant wait to see cars running these kits.

Thanks,

Greg

[XLR8 Craig]

Also... verified the Integrated Engineering Plates will indeed work with the MSS kits.

How about them apples ;)

Greg

[XLR8 Craig]

Everyone, we have only a few days remaining on this pre-order for MSS Kits! Get them now before you miss out on substantial savings!

[XLR8 Craig]

We are nearing the end of the pre-order phase for MSS Kits suspension for the MK7 VW/8v Audi. Deposits are required by March 31st to receive the discounts of 20% (VW) and 30% (Audi) kits.

If you are interested I would be happy to assist you.

Thanks

Greg

[XLR8 Craig]

Last day for pre-orders!

[XLR8 Craig]

Well... decided to keep this open, you have until the end of April to place your orders for pre-order.

Thanks!

Greg

[XLR8 Craig]

Our MK7 test kit (street standard) has arrived. First impressions in our shop will be had on Monday :)

[XLR8 Craig]

Project MK7 Golf R received our tester set of MSS Springs Street Standard Suspension kits, Integrated engineering camber plates and 034 Motorsport rear subframe bushing inserts.

Click the photos to shop for these items for your 2015+ GTI, Golf, Golf R, 8v A3/S3








Overall impressions are fantastic so far. The car feels so much more planted on the road and takes bumps and dips in the road like a champ and overall ride quality has improved quite a bit. The car feels more confident going into the turns and feels stable in high speed cornering where it felt a bit nerve racking at times. If anyone is local and would like to arrange a ride, please let us know!

Thanks,

Greg

[phillyquattro]

I'm seriously considering re-installing the factory magnetic ride suspension and going with these. I'm getting a little tired of CELs for dampening every time I drive. Decisions, decisions.

[alexdva78]

I've looked at the kits you got for 2015 s3, but I could not find front alone kit. I did find the rear kit by itself though.

Do you have the front kit by itself?

Sent from my SM-N910T using Tapatalk

[XLR8 Craig]

I'm seriously considering the factory magnetic ride suspension and going with these. I'm getting a little tired of CELs for dampening every time I drive. Decisions, decisions.

Even though we are outside the pre-order phase, I can still get you into a set of these at a discounted price. Let me know and I can provide you with whatever pricing you need.

I've looked at the kits you got for 2015 s3, but I could not find front alone kit. I did find the rear kit by itself though.

Do you have the front kit by itself?

Sent from my SM-N910T using Tapatalk

We can sell the front kit by itself, but if you don't mind me asking why? Let me know which setup you want and I can provide you with the pricing.

Thanks,

Greg

[alexdva78]

I have just installed a rear sway bar to my stock springs and and the rear springs feel perfect with just the wheel gap that I want. Now, I just want to adjust the gap in the front to match the rear. Pretty much that is my reason just to purchase the front ones.

Thanks





Sent from my SM-N910T using Tapatalk

[XLR8 Craig]

I have just installed a rear sway bar to my stock springs and and the rear springs feel perfect with just the wheel gap that I want. Now, I just want to adjust the gap in the front to match the rear. Pretty much that is my reason just to purchase the front ones.

Thanks





Sent from my SM-N910T using Tapatalk

Perfectly understandable, however I am not quite sure how they are going to work in conjunction with the stock rear, but if you want to try it, go for it! we can always upgrade you to a rear kit no problem. Fully adjustable fronts are $571 these are adjustable 10-30mm so you can adjust it to your liking. We can offer these 10% off right now.

Thanks,

Greg

[XLR8 Craig]

For those of you who missed out on the pre-order we are offering new customers 10% off and free shipping on orders until the stocking order arrives.

E-mail me for more information - [email protected]

[XLR8 Craig]

Still taking orders! We are also still on track for July shipment on Audi kits.

[XLR8 Craig]

10% off and free shipping on new orders. Arrival of stock should be here in a month- month and a half. A bit delayed but save while you still can.

[Arclight]

Thanks for the update

MSS is all the slow they want to be on delivering these orders to the US....

[XLR8 Craig]

Thanks for the update

MSS is all the slow they want to be on delivering these orders to the US....

Not just the US, the ROW too. They are doing what they can at the mercy of suppliers. Once every thing is ready we shall see our order in only a few days from England. We are waiting patiently, but oh so excited. Had some more seat time on my way to lunch the other day with our customers Golf R and man the car just feels so good on the road. Comfortable, stable, smooth... words are hard to describe how awesome these things are on a daily driver. Well worth the money if you daily drive your track car. :)

[XLR8 Craig]

Standard Kits are due to arrive next week and the fully adjustable kits are due to arrive 3-4 weeks after. Thanks for everyone for being patient on the pre-order and the unforeseen delays.

Thanks,

Greg

[phillyquattro]

I should have bought a fully adjustable kit when you had the 30% off deal, but I wasn't quite ready to give up on the Bilstein's yet. Argh.

[XLR8 Craig]

I should have bought a fully adjustable kit when you had the 30% off deal, but I wasn't quite ready to give up on the Bilstein's yet. Argh.

I know what you mean, I just suffered from the same thing for a set of wheels I've been eying for my truck . Shoot me an e-mail and we'll talk.

Thanks,

Greg

[email protected]

[Arclight]

Any updates on the fully adjustable kits? We are now mid way through July...

[XLR8 Craig]

Some updates as of yesterday. The rear kits are on their way to us as we speak. ETA on the Front fully adjustable? August from what William as told me.

[XLR8 Craig]

Hello everyone, Josh, myself and William from MSS have been in contact about the issues why this has taken so long.

The delays on the fully adjustable kits is simply down to the front adjustable spring rates not being right for the MK7 R specifically - we could have released the kits and dealt with issues via Returns however that is not how we want MSS to do things...the marketplace is full of too many poorly developed products and doubt we need to add to that!

A small change in spring rate has been necessary so that has pushed production back further at present in to August. Where a change is necessary, it makes sense to do it now and not later. It is costly to stop production mid flow however am not a fan of expecting customers to be an extension of our R&D...so it is the right thing to pull the springs and get it right.

The MSS customer base is formed of professional race drivers; race engineers; seasoned modders; knowledgeable enthusiasts - all have credible views worth taking note hence the risk will always be too high for us to go with a product that is 95% of what it needs to be - 100% is the minimum we set out to achieve.


We are offering a solution to those who have pre-ordered and I will be sending out an e-mail out on Monday once these details are finalized. We hope that this seems fair to those who have waited so long.



Thanks,

Greg

[Arclight]

Got it. I look forward to your email. I was really hoping to have them installed by the beginning of August, prior to H2Oi.

[XLR8 Craig]

E-mails sent. If there is anyone who didn't get one please e-mail [email protected]

[XLR8 Craig]

MSS Street and Sport Standard kits are en route to Excelerate Performance for the Gol/GTI/R and should be arriving next week. Audi Kits shouldn't be too far behind.

Based of timelines of shipping, looks like the fully adjustable kits are now due in a few weeks. I will release further details as we come closer. (Pre-orders will ship first)

ALSO!

Have H&R Sport springs? Or springs for another brand and experiencing a harsh ride? We also have MSS adjustable rear kits IN STOCK. Soften up the ride and experience a significant increase in handling performance with the MSS rear kit, well matched to the H&R front springs.

Questions? let me know!

Cheers Everybody!

Greg

[XLR8 Craig]

Adjustable Rear Sports kits in stock and ready to ship. Paired well with VWR, H&R, KW front springs that are preexisting and currently on the car. Cure your harsh ride for good with these rear adjustable springs. Capable of 10-30mm drop in the rear are adjustable enough to match just about every aftermarket spring on the market.

[Arclight]

Any updates on the Fully Adjustable kits for the S3/A3? Patiently waiting....