Spacers with stock 19"

[Rkost]

I'm considering purchasing 10mm and 20mm spacers for my 19" peelers. It looks like they have an offset of 39. I chose the 10mm and 20mm because they seem to be very popular with the other Q's on this board, but the seller cautioned me to check with the other members. Does anyone see any fitment issues?

Thanks for any advice guys!

Sent from my Note 5

[DanMontgomery]

Sir,

Not exactly sure what size or offset of the 19" Peelers are compared to the regular 19" rims....but here a link to another thread that will give you some more information.

http://www.audiworld.com/forums/q5-s...acers-2852671/

Seems like a good place to start.

V/r
Dan

[yakev724]

For stock Q5 offsets, I think 12F/20R is ideal (just from my research). If your B8 wheels have different offsets, adjust accordingly.

[riceboy22]

I'm considering purchasing 10mm and 20mm spacers for my 19" peelers. It looks like they have an offset of 39. I chose the 10mm and 20mm because they seem to be very popular with the other Q's on this board, but the seller cautioned me to check with the other members. Does anyone see any fitment issues?

Thanks for any advice guys!

Sent from my Note 5

I believe people have found using a 12.5mm and 20mm spacer combo gets you flush on the stock et33 wheels when you're moderately lowered. I'd expect you'd be fine with those spacers and et39 wheels, but it is going to depend on your ride height and even potentially your alignment.

Quick question on Wheel Spacers for 2015 SQ5

EDIT: Meant fine with the et39 wheels he's talking about.

[SQ5LIFE]

I believe people have found using a 12.5mm and 20mm spacer combo gets you flush on the stock et33 wheels when you're moderately lowered. I'd expect you'd be fine with those spacers and et33 wheels, but it is going to depend on your ride height and even potentially your alignment.

Quick question on Wheel Spacers for 2015 SQ5

I second this. I have ecs spacers on H&R -01 springs. And i use 12.5mm in front and 20mm in the back and i think its perfect. Make sure you get the supplied extended bolts with those spacers because you cannot use your stock bolts then.

[Rkost]

Thanks guys, just wanted to double check!

Sent from my Note 5

[BlackSVT]

I second this. I have ecs spacers on H&R -01 springs. And i use 12.5mm in front and 20mm in the back and i think its perfect. Make sure you get the supplied extended bolts with those spacers because you cannot use your stock bolts then.

Looks like I'm a little late here, but just wanted to chime in with the 12.5/20 combo being the right mix for flush on my stock 19s as well. I was a bit concerned the 12.5s might be too much (despite measuring 3x ...and seeing that as the way to go...), but it's spot on.
Good Luck!

[Gluca685]

You gonna post pics or what?

[R y an]

Im on 15fr/20rr on my 19" wheels looks good and no rubbing.
Ill try to post a pic for you

[R y an]

Im on 15fr/20rr on my 19" wheels looks good and no rubbing.
Ill try to post a pic for you

(rear) no spacer
https://photos-3.dropbox.com/t/2/AAA...60&size_mode=3

(rear) spacer

[Gluca685]

linky no worky ;(

[Rkost]

(rear) no spacer
https://photos-3.dropbox.com/t/2/AAA...60&size_mode=3

(rear) spacer

Can you repost photos with spacers, the previous one you posted did not work.

Sent from my SAMSUNG-SM-N920A using Tapatalk