Need to free up some space so time for these to go.
I don't always have a chance to check my messages so any questions just send me a text, doesn't matter what time of the day 609-3six4-327four
Volk evo 3
18x8.5et33 fronts 6" barrel 2" lip
18x9.5et43 rears 6" barrel 3" lip
5x114.3, I ran them with 034 studs and had no problems.
73.1 hub bore, so you will need hubcentric rings(less than $10)
They are in good shape but have some flaws. Really just need a new barrel or for the crack to be welded, and then a nice cleaning and some polish to really shine again.
The fronts are taken apart, one of the front barrels has a small crack. Could be easily welded but I would recommend contacting threepiece.us or someone else for a new barrel. Threepiece.us said it would be 200. The other front barrel was made by spintech and fits great. Only has ~500 miles on it.
One of the rears had a tire debead at ~5mph when I pulled into the gas station. I stopped driving immediately and put my spare on, but the inner barrel has some "curb rash" and a few chips and dings. Still straight and still holds air well.
The lips are all in good shape, one rear has a tiny section of knicks but looks decent still. They all could use a clean and some polish.
Have all oem centercaps in great shape, as well as 2 extra unpainted center cap plates, and one extra cracked center cap.
Asking 1200 local preferred, but I can ship if necessary. Shipping will most likely be 150-200.
No tires, the ones on the rears are junk.
Rears
Fronts
And on my b7 with a 20mm spacer
On my friends b5 s4, forget what size spacers.
Sent from my iPhone using Tapatalk
Bookmarks