new wheels and mickey thompson drag tires on my rs7

[nickrs7]

<a href="http://tinypic.com?ref=huelub"

[OmaHahn]

More pics!

[nickrs7]

my old setup

[VMRWheels]

my old setup

gets me everytime!

[gk1]

Wow. How much did they drop your 60 foot and ET?

[nickrs7]

my best was 2.68 with my old tires on 104 race gas

[nickrs7]

i am doing for my 1/4 time on my old tires i did 10.8

[kouzman]

How did you manage a 2.68 on whatever tires? !!!!!!!!!!
Unless you were on ice!

I have a 1.68 as best 60ft on Michelin PSS.

You should be careful with the excess traction. Because the car is so heavy with all this torque you might snap an axle.

There were a few cars in the east coast that had this issue...

[Sd76]

Old set up is sweeeet!


Sent from my iPhone using Tapatalk

[nickrs7]

2.68 was on the stock tires on the street

[OOOO SSSS]

My ET on my stock RS6 was 1.78 sec.
Question for you guys with APR tune : How do you launch the car without it trying to trying to lurch forward while holding down the brakes. The brakes do not seem to hold it on LC with the software tune. My car is a c7.5. Any words of wisdom ?


Sent from my iPhone using Tapatalk

[OOOO SSSS]

<a href="http://tinypic.com?ref=huelub"

Awesome setup... I ran the same MT ET street radial with great success on my Loba Turbo RS3 ;)


Sent from my iPhone using Tapatalk

[sciblades]

Those of us with radials see 1.5x 60 foots stock pzero do 1.6x

Sent from my VS986 using Tapatalk

[nickrs7]

i ment 0 to 60 2.68

- - - Updated - - -

Those of us with radials see 1.5x 60 foots stock pzero do 1.6x

Sent from my VS986 using Tapatalk

i ment 0 to 60 2.68

- - - Updated - - -

My ET on my stock RS6 was 1.78 sec.
Question for you guys with APR tune : How do you launch the car without it trying to trying to lurch forward while holding down the brakes. The brakes do not seem to hold it on LC with the software tune. My car is a c7.5. Any words of wisdom ?


Sent from my iPhone using Tapatalk

i ment 0 to 60 2.68

- - - Updated - - -

How did you manage a 2.68 on whatever tires? !!!!!!!!!!
Unless you were on ice!

I have a 1.68 as best 60ft on Michelin PSS.

You should be careful with the excess traction. Because the car is so heavy with all this torque you might snap an axle.

There were a few cars in the east coast that had this issue...

i ment 0 to 60 2.68

[sciblades]

With or without roll out? Do you mind sending me your pbox data in raw form? Sciblades(at)gmail.com

Sent from my VS986 using Tapatalk

[Dads RS7]

What size are they? Is it a square set up?

[DoughBoyFreshLV]

Super meaty 💪💪

Sent from my SAMSUNG-SM-N910A using Tapatalk

[TurtleHaste]

What wheel and tire specs are those?


Sent from my iPhone using Tapatalk

[martz]

How do you launch the car without it trying to trying to lurch forward while holding down the brakes. The brakes do not seem to hold it on LC with the software tune. My car is a c7.5. Any words of wisdom ?

Press your brake pedal harder.

[TurtleHaste]

My ET on my stock RS6 was 1.78 sec.
Question for you guys with APR tune : How do you launch the car without it trying to trying to lurch forward while holding down the brakes. The brakes do not seem to hold it on LC with the software tune. My car is a c7.5. Any words of wisdom ?


Sent from my iPhone using Tapatalk

Good question, this may help other RS7 times. One of the things you need to be aware of is the RS7 doesn't have launch control. You may already know that. But that means you have to rely on the brake and can easily overpower it at high hp levels. The key here is you need to have the brakes warm. If your car is sitting in the cold weather in the pits, or waiting before the lineup, you will rob your braking ability. I don't know the best method of warming the brakes aside from driving. Be sure they are warm and you'll notice better holding capacity on them. Any owner suggestions on how to keep them warm would be nice.


Sent from my iPhone using Tapatalk

[nickrs7]

What size are they? Is it a square set up?

stock is rim 21x9 tire was 275/30/21 new rim 20/9 tire 275/40/20

[Ensoniq]

0 to 60 mph or kph in 2.68

[nasser]

How did you manage a 2.68 on whatever tires? !!!!!!!!!!
Unless you were on ice!

I have a 1.68 as best 60ft on Michelin PSS.

You should be careful with the excess traction. Because the car is so heavy with all this torque you might snap an axle.

There were a few cars in the east coast that had this issue...

There always a way

http://www.driveshaftshop.com/ will do you a custom new one if they already don't have them in stoke!

[cobrario]

What ever happened with this thread? no results, not slips, nada?

[Rudolfo]

Sure there are. You guys just have him beat on your PSS rubber.

http://www.audizine.com/forum/showth...1#post12008880