Bixenon questions

[Kostas_AudiA4]

Hi all !!!! Just a couple of questions regarding the retrofit of bixenon lights to my A4 B7.

I have the lights, ballasts etc. I also purchased the Kufatec loom https://www.kufatec.de/shop/en/audi/...pter-audi-seat
My question is: Will xenons work just with this loom or i will need https://www.kufatec.de/shop/en/audi/...fit-audi-a4-b7 as well ?

I know it's been covered in the past but i'd really like to know your thoughts


Thank you beforehand.

Kostas

[Los Cuentos]

It wil work with only the loom. But if you want it oem and wants they auto level you need the second set too

[Kingzilla17]

It will depends on the lights you are trying to retrofit. I used the regular adapter to get my non adaptive bixenons on my car. I did not have to purchase the second link. The other link would be used for the Adaptive headlight feature if im not mistaken. Someone else can chime in on that one.

[Kostas_AudiA4]

Thank you both. What i am trying to figure out is if i install the xenons with the ''basic'' Kufatec harness will i be able to control the beam height through my existing switch ?

[aluthman]

Thank you both. What i am trying to figure out is if i install the xenons with the ''basic'' Kufatec harness will i be able to control the beam height through my existing switch ?

Yes, after you do some recoding via vagcom. I have AFS lights retrofitted in my car. You cannot retrofit the AFS feature, so they operate like regular bi-xenons. I did not install the leveling sensors, so I have to aim them manually if I ever remove and reinstall one.

[Kostas_AudiA4]

Kufatec sells two harnesses. One non afs (just up down) and one afs ( right-left). I am interested in installing the first (non afs). Can I add it later on ? Thanks

[aluthman]

I used a non afs harness on my afs lights and it works fine. AFS cannot be added due to certain non-programmable modules that will not allow it. I'm not sure on the specifics, but fly300kts is the guy to talk to about it.

[Axis]

Kufatec sells two harnesses. One non afs (just up down) and one afs ( right-left). I am interested in installing the first (non afs). Can I add it later on ? Thanks

First harness you posted is needed to get the headlights to work. You will have to code via vagcom to be able to use yor highbeams.

Second harness you posted could be bought and installed afterwards, its to get the afs function to work. I personnally have never seen anyone do it. Probably more popular in Europe because of the regulations.

[Kostas_AudiA4]

If I install the first harness my existing beam height switch will work with xenons??


Sent from my iPhone using Audizine mobile app

[aluthman]

If I install the first harness my existing beam height switch will work with xenons??


Sent from my iPhone using Audizine mobile app

Yes, but only after you change the coding in VCDS.

[Kostas_AudiA4]

Thank you. Any tutorial or how to??


Sent from my iPhone using Audizine mobile app

[Axis]

I'm about to change my username to "spoon feeding"

[james12lucy]

I'm about to change my username to "spoon feeding"

Bahahahahahahaha. Axis, you're by far the best guy ever! I hope to be at your level of Audi knowledge someday.

[Axis]

Bahahahahahahaha. Axis, you're by far the best guy ever! I hope to be at your level of Audi knowledge someday.

Wont be too long since I don't know that much lol

Lots of people on az have [b]way[/] more Audi knowledge than I do.

I dont mind helping since thats how I learned, I still have to poke a bit thought :P

[Kostas_AudiA4]

I don't know jack about Audi's and from you I learned a ton. Kudos sir


Sent from my iPhone using Audizine mobile app