Audizine - An Automotive Enthusiast Community

Results 1 to 6 of 6
  1. #1
    Senior Member Three Rings Delmed83's Avatar
    Join Date
    Feb 19 2013
    AZ Member #
    109840
    Location
    CT

    Anyone get squeaking/creaking from H&R OE springs?

    Guest-only advertisement. Register or Log In now!
    Just got done installing the front H&R OE sport springs with audi sport shocks. Whenever I finish a suspension install I manually bounce the car and listen for anything undesirable. This is the first time I finished up and heard squeaking from both sides as I bounce the front end. Anyone get this from these springs? I re-torqued everything with the suspension loaded. I installed the progressive coils on top.......sounds like it's coming from that area. I left the tubing on there that came on the springs. WTF
    Black 2013 B8.5 A4

    Previous rides:
    Silver 2001.5 B5 S4 - EPL Stage 3
    Black 2001 B5 A4 - Dahlback Stage 2
    Black 2006 B7 A4 S-Line APR Stage 2+
    Dolphin Gray B7 S4

  2. #2
    Senior Member Three Rings Slim0531's Avatar
    Join Date
    Aug 05 2014
    AZ Member #
    271030
    My Garage
    2010 Santorini Black Land Rover LR4
    Location
    CT

    Don't have that issue on mine. Running them for almost a year now. Double check any metal to metal contact between your spring and shocks. Sometimes the rubber isolator or whatever they call it is not aligned properly


    Sent from my iPhone using Tapatalk

  3. #3
    Senior Member Three Rings Delmed83's Avatar
    Join Date
    Feb 19 2013
    AZ Member #
    109840
    Location
    CT

    Thanks I took the time and made sure everything was aligned properly when reassembling the strut tower. I have to finish up the rears this morning and then take it for a ride....hopefully it's not as bad as I think it is or maybe they'll work themselves in.

    Is it really necessary to loosen and re-torque the lower control arm bushings and all the sway bar bushings at the new ride height (basically all the bushings that don't have to be taken apart in order to do the installation)?
    Black 2013 B8.5 A4

    Previous rides:
    Silver 2001.5 B5 S4 - EPL Stage 3
    Black 2001 B5 A4 - Dahlback Stage 2
    Black 2006 B7 A4 S-Line APR Stage 2+
    Dolphin Gray B7 S4

  4. #4
    Established Member Two Rings RW12's Avatar
    Join Date
    Dec 28 2015
    AZ Member #
    366424
    My Garage
    1997 Safari van, SV650 Superbike, YZ85 supermoto
    Location
    Vancouver

    Quote Originally Posted by Delmed83 View Post
    Thanks I took the time and made sure everything was aligned properly when reassembling the strut tower. I have to finish up the rears this morning and then take it for a ride....hopefully it's not as bad as I think it is or maybe they'll work themselves in.

    Is it really necessary to loosen and re-torque the lower control arm bushings and all the sway bar bushings at the new ride height (basically all the bushings that don't have to be taken apart in order to do the installation)?
    Yes, otherwise the bushings will be destroyed in short order.

  5. #5
    Senior Member Three Rings Delmed83's Avatar
    Join Date
    Feb 19 2013
    AZ Member #
    109840
    Location
    CT

    So I finished up and took her for a ride....the fronts don't make noise surprisingly but the right rear is creaking loud over bumps. I backed up the rear onto ramps and had my fiance bounce the rear end while I listened.......narrowed it down to the right rear bump stop making the noise. What do you guys use to lube the bump stops? I always use silicon spray for bushings but I feel like this won't resolve it. I'm gonna go out there a try a couple things.


    **Solved**

    Jacked up the rear, pulled the bump stop down and lubricated with silicon spray. Also cleaned sand and dirt from upper shock mount. No more creaking.
    Last edited by Delmed83; 02-28-2016 at 07:57 PM. Reason: Solved
    Black 2013 B8.5 A4

    Previous rides:
    Silver 2001.5 B5 S4 - EPL Stage 3
    Black 2001 B5 A4 - Dahlback Stage 2
    Black 2006 B7 A4 S-Line APR Stage 2+
    Dolphin Gray B7 S4

  6. #6
    Senior Member Two Rings jcpowell's Avatar
    Join Date
    Oct 18 2017
    AZ Member #
    408563
    Location
    Somewhere, GA

    Quote Originally Posted by Delmed83 View Post
    So I finished up and took her for a ride....the fronts don't make noise surprisingly but the right rear is creaking loud over bumps. I backed up the rear onto ramps and had my fiance bounce the rear end while I listened.......narrowed it down to the right rear bump stop making the noise. What do you guys use to lube the bump stops? I always use silicon spray for bushings but I feel like this won't resolve it. I'm gonna go out there a try a couple things.


    **Solved**

    Jacked up the rear, pulled the bump stop down and lubricated with silicon spray. Also cleaned sand and dirt from upper shock mount. No more creaking.
    Not to revive an ancient thread, but I’ve got the same problem with the rears being really squeaky. Any way someone can help me understand what he did to fix it? I’m not too knowledgeable when it comes to suspension components.

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.