:: ECS Tuning :: ECS B8/B8.5 S4 ECS RS4 Mesh Style Grilles

[ECS Tuning-Audi]

Make your B8/B8.5 Audi S4 stand out amongst less seasoned offerings. The new ECS Tuning mesh style grilles are a bolt-on upgrade to spice up your car's fascia.

Our exact-fit grilles are a literal snap to install using common hand tools. We've even put together complete photo-tutorial installation guides so you can add the pleasure of installing them to your overall enjoyment of this great upgrade.

Made of tough ABS plastic and molded to exacting dimensions, this RS4 style grille gives a truly sleek look.


Simply Aggressive

Click HERE to order or for more information


Fits:
Audi B8/B8.5 S4 2010-2015

Be sure to check out our -----> Installation PDF <-----

Let me know if you have any questions.

Jason

[jl87]

Dang, few weeks too late. Was waiting and waiting for the integrated ring holder. Regardless, great looking product ECS!

[infinkc]

when you guys going to make some lower fog grills that match the rs4 grill for the b8 s4/sline?

[noyzcij3]

Do you have a picture of the grille from above? Wanted to see how far the ring holder sticks out from the plane of the grille.


Sent from my iPhone using Tapatalk

[ECS Tuning-Audi]

when you guys going to make some lower fog grills that match the rs4 grill for the b8 s4/sline?

Might be able to bring something in. We'll look into it.

Do you have a picture of the grille from above? Wanted to see how far the ring holder sticks out from the plane of the grille.


Sent from my iPhone using Tapatalk

Only pics I could really find that show how far it sticks out.





Jason

[UberBrute]

How many rows of honeycombs does it have? It appears to be 21 from my count but the angles of the pictures makes it tough to know if I counted 100% correctly. I'm hoping I'm off and that its actually 23 like the true RS grill and the Innotech replica on amazon (http://www.amazon.com/gp/product/B00UXKNROI).

either way, still excited to see ecs carrying a grill with the built in audi rings.

[ECS Tuning-Audi]

Going up and down I got 17 on the one you linked to and 15 on ours.

Jason

[UberBrute]

Going up and down I got 17 on the one you linked to and 15 on ours.

Jason

Hm, maybe i'm counting differently? I attached a picture with a red mark inside each partial or full honey comb that I counted, and I'm pretty sure the ECS grill is 21 across?




Edit: I'm not complaining, to be clear. I'm just trying to confirm exactly what I would be getting. Thanks for the help Jason!

[rcz22]

I think this is mentioned in another thread (but couldn't easily find it) so I apologize... is the S4 easily detached from the old grill? How is it attached to the new RS4 grill? I looked at the PDF instructions however that step was not included....btw great write up whoever did the instructions, very detailed!

[Joker S4]

Hm, maybe i'm counting differently? I attached a picture with a red mark inside each partial or full honey comb that I counted, and I'm pretty sure the ECS grill is 21 across?




Edit: I'm not complaining, to be clear. I'm just trying to confirm exactly what I would be getting. Thanks for the help Jason!

Count from top to bottom? Edit, Jason said it was top to bottom, and not sure why it would be counted horizontally. This is the first I've heard of counting in the way you have. Maybe you're the only one doing it right?

Sent from my SM-G900V using Tapatalk

[DannyDeez]

I think this is mentioned in another thread (but couldn't easily find it) so I apologize... is the S4 easily detached from the old grill? How is it attached to the new RS4 grill? I looked at the PDF instructions however that step was not included....btw great write up whoever did the instructions, very detailed!

Once you have the factory grille off it is very easy to detach the S4 badge. Its just clipped in.

To reattach it to the RS grille, I just used a rubber based silicon. In the past I've been creative by drilling and inserting a cotter pin, but ultimately its just easier to glue it. Lets face it, we aren't removing that badge once its on. In the event that I did want to remove it, that silicon would pull off.

[scottycs]

Same Chinese grill you can get on eBay, etc. for $70 less.

[Lensch09]

Dang, few weeks too late. Was waiting and waiting for the integrated ring holder. Regardless, great looking product ECS!

I was thinking the exact same thing. I was waiting and waiting for the integrated ring holder, and just a few weeks ago, wound up pulling the trigger on a competitors product that offers the integrated ring holder.

Oh well, hind-sight is 20/20.

-DL

[ECS Tuning-Audi]

Count from top to bottom? Edit, Jason said it was top to bottom, and not sure why it would be counted horizontally. This is the first I've heard of counting in the way you have. Maybe you're the only one doing it right?

Sent from my SM-G900V using Tapatalk

I was counting up and down. And only counting the honey combs in the same direct row.

Jason

[Kayone73]

Installed the new ECS tuning grill w integrated ring holder. Great quality & fit as always.






Sent from my ONE A2005 using Tapatalk

[ECS Tuning-Audi]

BEAUTY!!

Thanks for the order!

Jason