Ocean Blue Bagged B7 Avant

[Los Cuentos]

Hi guys,

finally time to post my story about my B7 TDI Avant Ocean Blue Pearl

Car: Audi A4 B7 Avant
Model: 1.9TDI
Color: Ocean Blue Pearl
Power: 115hp original -> 150hp chipped
Location: Belgium

Car is as good as full option except for Xenon headlights.


Some pictures when i bought my car:





Installed a few months later an AP coilover set and fitted an S Line front bumper.
Also fitted Rotiform Nue wheels underneath the car.
Just a few months later i decided to become an addict an bagged my car with Airlift Air suspension.
I went with the Autopilot V2 controller.







Last year I sold my Rotiform Nues and bought a new set of Rotiform IND. Love those wheels.
Also notched the front up and down to get extremely low.
Here are a few pictures just before winter.

Untitled by Maxime Debaere, on Flickr








Now doing some updates on it so more pictures coming soon with my updates :D

The winterlist:

- Dual exhaust
- S line diffusor
- Side kirts DONE
- Painting my cupra lip and fog light grills DONE
- Installing an Raspberry Pi in the car (for my RNS-E) ALMOST DONE
- some wheel updates
- RS6 grill ALMOST DONE
- BiXenon headlights ALMOST DONE

Stay tuned, or even better stay slammed :D

[Los Cuentos]

Painted my Cupra lip, fog light grills and installed side kirts.
Now just need to finish my new grill and fit it :D
Also got my BiXenon headlights ready. Blacked them and CC mod too.

12744712_459631047559287_8274298062950269567_n

Untitled

Untitled

[Operator]

Coming along quite nicely!!

[Los Cuentos]

Quick write-up about my car entertainment system i have installed.
My headunit is a RNS-E and i wanted to keep it all OEM.
What i've done:



Connected a Kufatec AMI+ controller at my RNS-E so i can connect an multimedia device and a backup camera.
I bought also an Raspberry Pi (that tiny little computer) and used a CANBUS module to put on the RPI so it can read all data out of my car and all buttons will work ( steering wheel etc.)
Next i fitted an 4port USB Hub (high AMP one with 2,5 amp/ port ) to connect a MIFI ( that's a mobile router with LTE function) and a HDD cause the RPI doesn't give that much power.
I also connected my Phone holder to it and made sure all cables are not visible. ( got a mountr mount. it's magnetic and it charges wireless. no more s*** with my iPhone cables :D).
The CANBUS module starts up the RPI with the ignition of my car and properly shuts down when i turn off my car so data couldn't corrupt.
Only problem i have is that the CANBUS itself doesn't work 100% (My car is a little bit flipping sometimes) so i disconnected it and i will look to work wit an 12V ignition to start up / shut down.
For the buttons i will look to connect the Remote line to the RPI (saw on the internet it works)

On the RPI, i installed openelec. An open source linux distro with Kodi (XBMC) implemented. To connect the RPI with the AMi is used a simple HDMI to AV adapter.
Had i little struggle with the right resolution and had to fix my font cause they were not good readable on my RNS-E screen. But i found a good theme now and edited the font size and it's all perfect now.
Putted everything away in my glovebox but need to put everything on a nice way.
Here's a pic how it looks into my glovebox:





Here's a video to show it's working:



Also fitted an Backup camera. Bought a second hand camera on ebay for only 75$ and bought the Q7 handle with LED lights and resistors.
Don't look at my dirty car. took these pics in a rush. will post some nice pics soon:





Only thing left is to do a VIM hack on my RNS-E and code it that the Backup camera works when i put it in reverse (now i neet to set it manually on the source but i don't have a legit VCDS cable so need to wait till a guy i know has the time to do it for me

[Los Cuentos]

Installed my grill and bi xenon headlights!

[Osher67]

Quick write-up about my car entertainment system i have installed.
My headunit is a RNS-E and i wanted to keep it all OEM.
What i've done:



Connected a Kufatec AMI+ controller at my RNS-E so i can connect an multimedia device and a backup camera.
I bought also an Raspberry Pi (that tiny little computer) and used a CANBUS module to put on the RPI so it can read all data out of my car and all buttons will work ( steering wheel etc.)
Next i fitted an 4port USB Hub (high AMP one with 2,5 amp/ port ) to connect a MIFI ( that's a mobile router with LTE function) and a HDD cause the RPI doesn't give that much power.
I also connected my Phone holder to it and made sure all cables are not visible. ( got a mountr mount. it's magnetic and it charges wireless. no more s*** with my iPhone cables :D).
The CANBUS module starts up the RPI with the ignition of my car and properly shuts down when i turn off my car so data couldn't corrupt.
Only problem i have is that the CANBUS itself doesn't work 100% (My car is a little bit flipping sometimes) so i disconnected it and i will look to work wit an 12V ignition to start up / shut down.
For the buttons i will look to connect the Remote line to the RPI (saw on the internet it works)

On the RPI, i installed openelec. An open source linux distro with Kodi (XBMC) implemented. To connect the RPI with the AMi is used a simple HDMI to AV adapter.
Had i little struggle with the right resolution and had to fix my font cause they were not good readable on my RNS-E screen. But i found a good theme now and edited the font size and it's all perfect now.
Putted everything away in my glovebox but need to put everything on a nice way.
Here's a pic how it looks into my glovebox:





Here's a video to show it's working:



Also fitted an Backup camera. Bought a second hand camera on ebay for only 75$ and bought the Q7 handle with LED lights and resistors.
Don't look at my dirty car. took these pics in a rush. will post some nice pics soon:





Only thing left is to do a VIM hack on my RNS-E and code it that the Backup camera works when i put it in reverse (now i neet to set it manually on the source but i don't have a legit VCDS cable so need to wait till a guy i know has the time to do it for me

This is awesome I'm trying to look into getting a pi3 and setup kodi with Retropie and some music visualization on my rns-e

[3.2]

Installed my grill and bi xenon headlights!

More pics


Sent from my iPhone using Tapatalk

[Los Cuentos]

This is awesome I'm trying to look into getting a pi3 and setup kodi with Retropie and some music visualization on my rns-e

Must do! Great thing!

- - - Updated - - -

More pics


Sent from my iPhone using Tapatalk

I will post more pics soon with my summer wheels who are also finished :D

[Osher67]

Any updates?
I know was a while ago but couldn't help notice never saw any follow up.
I still haven't done this for my car yet but I did just get a lattepanda.

[Lucian189]

Nice car.
Great work.
Now install a 3.0 tdi :)

Trimis de pe al meu SM-J510FN folosind Tapatalk

[AudiA4_20T]

The bixenons are such a game changer for the look of the B7