Audizine - An Automotive Enthusiast Community

Results 1 to 19 of 19
  1. #1
    Veteran Member Four Rings Mr.Audi's Avatar
    Join Date
    Feb 26 2008
    AZ Member #
    25757
    My Garage
    none
    Location
    BALTIMORE

    Unitronic software

    Guest-only advertisement. Register or Log In now!
    Will go stage 2 when I do,

    But the search didn't turn up any info I was trying to find

    -with the stage 2

    Has anyone seen any mechanical failure beleived to be caused from the tune?

    Any issues with cold start or idle issues?


    Power curve and or drivability??


    Sent from ....
    B8.5 S-line prestige
    #fourringarmy

  2. #2
    Veteran Member Four Rings
    Join Date
    Aug 15 2014
    AZ Member #
    275179
    Location
    Seattle, WA

    nope. I haven't heard anything negative on the Uni Stage 2.
    For Sale: Mini Part Out

  3. #3
    Junior Member Two Rings
    Join Date
    Jan 14 2015
    AZ Member #
    309405
    Location
    Central NJ

    Ive had it for 6 months now. Very smooth and driveable. Not a torquey ride at all but it pulls pretty hard. My pcv went bad a few days after i flashed stage 2 but since replacing all is well. Cold start and idle, no issues there ( except when pcv went). My only problem is my clutch will slip on hard pulls out of 2nd and 3rd. Not sure if this is common for them or the guy that had my car for the first 13k smoked my clutch. I'm at 28k. I'm running the 034 hfc.

    Sent from my SM-G920T using Tapatalk
    2013 Black A4: Unitronic Stg 2, H&R coilovers, ECS short shifter, VMR V710s on PSS, S4 quad tip exhaust conversion, 034 hfc, CTS silicone hose kit, GFB DV+, 034 trans & diff inserts.

  4. #4
    Veteran Member Four Rings Mr.Audi's Avatar
    Join Date
    Feb 26 2008
    AZ Member #
    25757
    My Garage
    none
    Location
    BALTIMORE

    Quote Originally Posted by Shimmy View Post
    nope. I haven't heard anything negative on the Uni Stage 2.
    so far so good it seems


    Quote Originally Posted by GrandmazKustomz View Post
    Ive had it for 6 months now. Very smooth and driveable. Not a torquey ride at all but it pulls pretty hard. My pcv went bad a few days after i flashed stage 2 but since replacing all is well. Cold start and idle, no issues there ( except when pcv went). My only problem is my clutch will slip on hard pulls out of 2nd and 3rd. Not sure if this is common for them or the guy that had my car for the first 13k smoked my clutch. I'm at 28k. I'm running the 034 hfc.

    Sent from my SM-G920T using Tapatalk
    I've got 80k on mine
    So I would hate to have that be the case , but that kind of increase in power will expose any weakness
    Cool about the cold start and idle

    How's the mpgs?


    Sent from ....
    B8.5 S-line prestige
    #fourringarmy

  5. #5
    Junior Member Two Rings
    Join Date
    Jan 14 2015
    AZ Member #
    309405
    Location
    Central NJ

    Quote Originally Posted by Mr.Audi View Post
    so far so good it seems




    I've got 80k on mine
    So I would hate to have that be the case , but that kind of increase in power will expose any weakness
    Cool about the cold start and idle

    How's the mpgs?


    Sent from ....
    Im getting 23 city 31 highway.

    Sent from my SM-G920T using Tapatalk
    2013 Black A4: Unitronic Stg 2, H&R coilovers, ECS short shifter, VMR V710s on PSS, S4 quad tip exhaust conversion, 034 hfc, CTS silicone hose kit, GFB DV+, 034 trans & diff inserts.

  6. #6
    Veteran Member Four Rings Mr.Audi's Avatar
    Join Date
    Feb 26 2008
    AZ Member #
    25757
    My Garage
    none
    Location
    BALTIMORE

    Quote Originally Posted by GrandmazKustomz View Post
    Im getting 23 city 31 highway.

    Sent from my SM-G920T using Tapatalk
    Hell yea
    Nice , didn't change much


    Sent from ....
    B8.5 S-line prestige
    #fourringarmy

  7. #7
    Veteran Member Four Rings Mr.Audi's Avatar
    Join Date
    Feb 26 2008
    AZ Member #
    25757
    My Garage
    none
    Location
    BALTIMORE

    Anyone have any dyno sheets with either stage 1 or 2??


    Sent from ....
    B8.5 S-line prestige
    #fourringarmy

  8. #8
    Veteran Member Four Rings b6Hate4's Avatar
    Join Date
    Oct 27 2010
    AZ Member #
    66253
    My Garage
    Sepang S3, Arctic S4.
    Location
    Norwood, MA.

    I do. I'll post tomorrow after i dig it up.
    2016 S3

    2004 S4- 2.7t, Shaved bay, wire tucked, PTE5858 single turbo full build.

    Instagram- @Thisisastickup

  9. #9
    Established Member Two Rings RW12's Avatar
    Join Date
    Dec 28 2015
    AZ Member #
    366424
    My Garage
    1997 Safari van, SV650 Superbike, YZ85 supermoto
    Location
    Vancouver

    Unitronic site has dyno sheets, but would be interested to see customer feedback.

  10. #10
    Veteran Member Four Rings Mr.Audi's Avatar
    Join Date
    Feb 26 2008
    AZ Member #
    25757
    My Garage
    none
    Location
    BALTIMORE

    Quote Originally Posted by RW12 View Post
    Unitronic site has dyno sheets, but would be interested to see customer feedback.

    Yea, but I bet real world numbers come out different

    Quote Originally Posted by b6Hate4 View Post
    I do. I'll post tomorrow after i dig it up.
    Thanks a lot man


    Sent from ....
    B8.5 S-line prestige
    #fourringarmy

  11. #11
    Veteran Member Four Rings Party_Marty's Avatar
    Join Date
    Nov 02 2015
    AZ Member #
    363887
    My Garage
    Sector 9 Long-board, Rugby Kit
    Location
    In the woods

    Quote Originally Posted by b6Hate4 View Post
    I do. I'll post tomorrow after i dig it up.
    I'd be interested in these as well!

  12. #12
    Veteran Member Four Rings b6Hate4's Avatar
    Join Date
    Oct 27 2010
    AZ Member #
    66253
    My Garage
    Sepang S3, Arctic S4.
    Location
    Norwood, MA.




    This was on 93 Octane, but with a tune meant for 91.

    Mods at the time were:

    -Unitronic stage 1
    -Forge FMIC
    -Eurocode HFC to 3" dual exhaust
    -Turbo inlet pipe
    -Forge BOV

    Again this is WHEEL horsepower and wheel torque. It was 65* that day and this was done in 4th gear.



    Sent from toilet stall #4
    2016 S3

    2004 S4- 2.7t, Shaved bay, wire tucked, PTE5858 single turbo full build.

    Instagram- @Thisisastickup

  13. #13
    Veteran Member Four Rings Dub_prime's Avatar
    Join Date
    Sep 10 2012
    AZ Member #
    100276
    My Garage
    2010 A4, 2008 Passat, 2002 GTI
    Location
    Bham AL

    That's a really big spread in hp from first to last pull, but good numbers.

  14. #14
    Veteran Member Four Rings b6Hate4's Avatar
    Join Date
    Oct 27 2010
    AZ Member #
    66253
    My Garage
    Sepang S3, Arctic S4.
    Location
    Norwood, MA.

    Quote Originally Posted by Dub_prime View Post
    That's a really big spread in hp from first to last pull, but good numbers.
    First 2 pulls were done in 3rd gear, however I was unsure of weather 3rd or 4th was closer to the 1:1 ratio.
    2016 S3

    2004 S4- 2.7t, Shaved bay, wire tucked, PTE5858 single turbo full build.

    Instagram- @Thisisastickup

  15. #15
    Veteran Member Four Rings Dub_prime's Avatar
    Join Date
    Sep 10 2012
    AZ Member #
    100276
    My Garage
    2010 A4, 2008 Passat, 2002 GTI
    Location
    Bham AL

    Ahh, this is leaning me toward Uni for my tune now... LOL

  16. #16
    Veteran Member Four Rings b6Hate4's Avatar
    Join Date
    Oct 27 2010
    AZ Member #
    66253
    My Garage
    Sepang S3, Arctic S4.
    Location
    Norwood, MA.

    Quote Originally Posted by Dub_prime View Post
    Ahh, this is leaning me toward Uni for my tune now... LOL
    I'm really unsure of weather updating to stage 2 would really help me at all, or make a tangible difference.
    2016 S3

    2004 S4- 2.7t, Shaved bay, wire tucked, PTE5858 single turbo full build.

    Instagram- @Thisisastickup

  17. #17
    Veteran Member Four Rings Dub_prime's Avatar
    Join Date
    Sep 10 2012
    AZ Member #
    100276
    My Garage
    2010 A4, 2008 Passat, 2002 GTI
    Location
    Bham AL

    Based on advertised numbers it's what 20 or so hp over stage 1? May increase timing where you have a little more under the curve though. My only concern with the Uni tune was it seemed like the torque on the stage 1+ and 2 seemed to be throttled back based on the other tuners advertised numbers, but with a stage one car at 277 lbft at the wheels it doesn't seem like that's an issue.

  18. #18
    Veteran Member Four Rings Mr.Audi's Avatar
    Join Date
    Feb 26 2008
    AZ Member #
    25757
    My Garage
    none
    Location
    BALTIMORE

    Unitronic software

    Fair to say that's some decent final #'s

    Anyone else have info or fact on 3rd or 4th gear pulls ?

    Uni stage 2 for me when I go for it.
    Who wants to gofund me dyno time money ??!!


    Sent from ....
    B8.5 S-line prestige
    #fourringarmy

  19. #19
    Veteran Member Four Rings Dub_prime's Avatar
    Join Date
    Sep 10 2012
    AZ Member #
    100276
    My Garage
    2010 A4, 2008 Passat, 2002 GTI
    Location
    Bham AL

    Do a gofundme for a dyno duel between APR and Uni, I'd be willing to be the victim lol

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.