Audizine - An Automotive Enthusiast Community

Results 1 to 9 of 9
  1. #1
    Registered Member One Ring
    Join Date
    Feb 17 2016
    AZ Member #
    368900
    Location
    new england

    please confirm that a 2.7t single mass clutch kit is a bolt on for a 3.0 v-6 6 speed?

    Guest-only advertisement. Register or Log In now!
    Can someone PLEASE confirm that a 2.7t single mass flywheel kit with clutch will bolt into a my 2003 A4 3.0 6 speed?
    I've been told it's literally a bolt/drop in, however, the only thing that needs to be checked/changed are the fly wheel bolts are the 2.7 bolts maybe too long and cannot be tightened down properly and will bottom out?

    Looking at several options...





    I would appreciate hearing from anyone that's actually installed an aftermarket single mass kit and if it was truly a drop in...my clutch is shot and it needs to be replaced.
    HELP!

  2. #2

  3. #3
    Veteran Member Four Rings jjvwg's Avatar
    Join Date
    Jan 01 2012
    AZ Member #
    86019
    My Garage
    2004 A4 Avant
    Location
    CO

    the better question is why wouldnt you just purchase the valeo single mass kit made for our cars?
    | 2004 A4 Avant | Gloss Dark Grey |
    | 2.7t K04 swap | 034 RSB | Apikol snub | 17z BBK |Vogtland GT1 Coilovers | Moog adj. UCA's | Peeler reps |

    | 2011 A4 Avant | Brilliant Black | 6MT swap | APR S2 | APR Downpipe | Vogtland Coilovers | RSE's | 034 Sway/tranny mount | Q5 brakes |

  4. #4
    Registered Member One Ring
    Join Date
    Feb 17 2016
    AZ Member #
    368900
    Location
    new england

    I haven't found a specific valeo kit for a 2003 Audi A4 3.0 6 speed...did I miss something? All I can find is the 2.7t kit...link please?

  5. #5
    Veteran Member Four Rings jjvwg's Avatar
    Join Date
    Jan 01 2012
    AZ Member #
    86019
    My Garage
    2004 A4 Avant
    Location
    CO

    whoops, didnt realize you have a 3.0. theoretically any kit made for an 01E tranny should work, it'll just come down to clutch stack height i would assume.
    | 2004 A4 Avant | Gloss Dark Grey |
    | 2.7t K04 swap | 034 RSB | Apikol snub | 17z BBK |Vogtland GT1 Coilovers | Moog adj. UCA's | Peeler reps |

    | 2011 A4 Avant | Brilliant Black | 6MT swap | APR S2 | APR Downpipe | Vogtland Coilovers | RSE's | 034 Sway/tranny mount | Q5 brakes |

  6. #6
    Veteran Member Four Rings SJorge3442's Avatar
    Join Date
    Aug 27 2013
    AZ Member #
    121842
    Location
    Philly

    Yes. The kits work on the 3.0. I was going to go this route until I was able to grab a 3.0 specific DMF and clutch pack on Rockauto for like $350. Here's a link to the thread where we were talking about it.
    2017 A4 6 Speed - Sport Plus - Mythos Black
    2018 Q5 - Prestige - Manhattan Grey

  7. #7
    Registered Member One Ring
    Join Date
    Feb 17 2016
    AZ Member #
    368900
    Location
    new england

    Quote Originally Posted by SJorge3442 View Post
    Yes. The kits work on the 3.0. I was going to go this route until I was able to grab a 3.0 specific DMF and clutch pack on Rockauto for like $350. Here's a link to the thread where we were talking about it.
    I read that thread, however...it appeared that no one had ever actually put one in...

  8. #8
    Veteran Member Four Rings imnuts's Avatar
    Join Date
    Aug 12 2009
    AZ Member #
    46297
    My Garage
    '21 F-150 Powerboost Lariat & '14 Acura RDX
    Location
    Dirty Jerz

    Quote Originally Posted by jjvwg View Post
    whoops, didnt realize you have a 3.0. theoretically any kit made for an 01E tranny should work, it'll just come down to clutch stack height i would assume.
    3.0 is in the title and first line of the first post...

  9. #9
    Veteran Member Four Rings jjvwg's Avatar
    Join Date
    Jan 01 2012
    AZ Member #
    86019
    My Garage
    2004 A4 Avant
    Location
    CO

    Quote Originally Posted by imnuts View Post
    3.0 is in the title and first line of the first post...
    haha, yea thats what i get for cruising audizine while trying to work at the same time!
    | 2004 A4 Avant | Gloss Dark Grey |
    | 2.7t K04 swap | 034 RSB | Apikol snub | 17z BBK |Vogtland GT1 Coilovers | Moog adj. UCA's | Peeler reps |

    | 2011 A4 Avant | Brilliant Black | 6MT swap | APR S2 | APR Downpipe | Vogtland Coilovers | RSE's | 034 Sway/tranny mount | Q5 brakes |

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  


    © 2001-2024 Audizine, Audizine.com, and Driverzines.com
    Audizine is an independently owned and operated automotive enthusiast community and news website.
    Audi and the Audi logo(s) are copyright/trademark Audi AG. Audizine is not endorsed by or affiliated with Audi AG.