Avant Garde F110 20x10 +18 20x11 +24

[tph4m86]

Hey guys,

I recently traded in my A7 for an S6 and no longer able to run these wheels. I've held on to them for a bit trying to figure out ways to fit them but unfortunately, the offsets are way too aggressive

• 20x10 ET +18
• 20x11 ET +24

The entire sent was sent to AG last year to have all the lips polished and barrels replaced due to bends. All the hardware was replaced and faces were refinished. These things are more or less, brand new! I really hate to see them go but there is absolutely no way they'll fit on the S6.

I had these on my A7 with H&R Coilovers. A 5mm spacer is needed to clear the brakes in the front but there was no rubbing at all with a 245F/275R tire setup. It should fit S5 and RS5 without problems as well. PRICE DROP! 2500+ shipping. Please PM me if interested!



Thanks,
Tuan

[Azoriano]

Hey guys,

I recently traded in my A7 for an S6 and no longer able to run these wheels. I've held on to them for a bit trying to figure out ways to fit them but unfortunately, the offsets are way too aggressive

• 20x10 ET +18
• 20x11 ET +24

The entire sent was sent to AG last year to have all the lips polished and barrels replaced due to bends. All the hardware was replaced and faces were refinished. These things are more or less, brand new! I really hate to see them go but there is absolutely no way they'll fit on the S6.

I had these on my A7 with H&R Coilovers. A 5mm spacer is needed to clear the brakes in the front but there was no rubbing at all with a 245F/275R tire setup. It should fit S5 and RS5 without problems as well. Asking 3800 + shipping. Please PM me if interested!





Thanks,
Tuan

Love these rims. Too bad our Canadian dollar is low or else i would jump all over these rims!

Good luck on the sale.

[tph4m86]

thanks! I'm not sure why the pics arent loading..

[Azoriano]

thanks! I'm not sure why the pics arent loading..

Looks good on my end!

[tph4m86]

man, these classifieds barely move. should i be posting elsewhere?

[Azoriano]

man, these classifieds barely move. should i be posting elsewhere?

Try other forums like audiforum.com
I just bought Kw V3 from there!

[Azoriano]

Keep bumping as well so your post stays at the top of the list. Secret is to keep it active.

[Sweep]

Have you posted these on the Audizine panjo classifieds as well?

It may be tough to find a buyer for a staggered setup

Sent from my XT1575 using Tapatalk

[bknewtype]

few reasons why AG forged wheels don't sell too easily in the used market:

-they are really over priced imo ( when buying new). not bashing on your price because im sure your paid a pretty penny for them, and who wouldn't wanna get top dollar, but for 3800 plus ship, buyers would probably rather go new. while not forged, you can grab a new set of bbs, vorsteiners, even hre flow forms for way less than that
- your fitment is super aggressive. have you seen how many people on this forum complain about rubbing and stuff? your setup probably can only be pulled off on stanced out 5's. not many would run 20x11
- a member here had to take a huge loss just to unload their AG 3 pc forged wheels. it just doesn't sell that well in the used market.
-to put in perspective, I had AG m550 ( cast ) and it cost me around 2500 for 19x9.5 with tires. ended up selling for 850 picked up after a few months. used for 8k miles

only thing I can suggest is either b patient and hope someone pays ur asking price, or drop it significantly to spark someone's interest.

[tph4m86]

few reasons why AG forged wheels don't sell too easily in the used market:

-they are really over priced imo ( when buying new). not bashing on your price because im sure your paid a pretty penny for them, and who wouldn't wanna get top dollar, but for 3800 plus ship, buyers would probably rather go new. while not forged, you can grab a new set of bbs, vorsteiners, even hre flow forms for way less than that
- your fitment is super aggressive. have you seen how many people on this forum complain about rubbing and stuff? your setup probably can only be pulled off on stanced out 5's. not many would run 20x11
- a member here had to take a huge loss just to unload their AG 3 pc forged wheels. it just doesn't sell that well in the used market.
-to put in perspective, I had AG m550 ( cast ) and it cost me around 2500 for 19x9.5 with tires. ended up selling for 850 picked up after a few months. used for 8k miles

only thing I can suggest is either b patient and hope someone pays ur asking price, or drop it significantly to spark someone's interest.

The member you speak of is the one I bought these wheels from. The "huge loss" was ~$3200shipped. I have replaced all barrels, hardware, and refinished everything...including switching from Chrome lips to Polished. My price is reasonable citing the additional work done. They are flawless and have not been mounted since.

These are 3 piece forged wheels. Pointless to compare to flow form 1piece.

I had these in my A7 on coils and no rubbing with the setup I posted. They didn't rub on an S5 either, hence why I'm marketing it here.

$3800 is my asking price. I'd be happy to entertain offers but I am not letting these go for $2500 because somebody thinks entry level HREs are the baseline.


Sent from my iPhone using Tapatalk

[tph4m86]

bump

[tph4m86]

added some better pics!

[tph4m86]

price drop, $3500 + shipping

[tph4m86]

upppppp

[tph4m86]

Price drop to $3000+shipping!

[tph4m86]

last drop to $2500+ shipping!

[ChaserBBS]

two weeks too late, I could have picked these up...

I bought BBS RS2's

[tph4m86]

two weeks too late, I could have picked these up...

I bought BBS RS2's

bummer :(. uppp