2005 BT B6 Audi A4 USP part out

**ShogunR32** · 02-15-2016 10:36 AM

***********car was sold today. Will post a few parts i have left over.

**Seerlah** · 02-15-2016 10:48 AM

Sucks to hear. What was your speed and rpm when valves hit? Are the cylinders and pistons fubered?

**deucescorner** · 02-15-2016 11:21 AM

full set of door blades available?

**ShogunR32** · 02-15-2016 11:48 AM

Originally Posted by Seerlah

Sucks to hear. What was your speed and rpm when valves hit? Are the cylinders and pistons fubered?

It was a silent death. Cruising at about 75mph the car just revved itself down from around 3k rpms. The belt was still on but the teeth were shredded. Timing is off but I am unsure of the condition of valves and bottom end. Im assuming the valves are toast. Sucks cause the bottom end has eagle rods and aeb pistons with only 55k miles on it.

**Seerlah** · 02-15-2016 11:54 AM

Bet you bottom end is just fine. Seems to me all you need is a replacement cylinder head. Sub $500 DIY repair.

Since it would be inevitable, pop the head and asses the damage. If you still end up wanting to part, I may take those eagle rods off your hands. But I suggest you get her back on the road.

**ShogunR32** · 02-15-2016 12:04 PM

Originally Posted by Seerlah

Bet you bottom end is just fine. Seems to me all you need is a replacement cylinder head. Sub $500 DIY repair.

Since it would be inevitable, pop the head and asses the damage. If you still end up wanting to part, I may take those eagle rods off your hands. But I suggest you get her back on the road.

Yeah im hoping for that. The transmission also got rebuilt about 10k miles ago

**jesse500** · 02-15-2016 12:51 PM

I'd be interested in oem Door blade (USP) for drivers side rear door.

**ShogunR32** · 02-15-2016 01:27 PM

As time goes by and I remove more parts off the car I will have more individual pics. I will list the door blades when I take them off the car.

**my_audi_a4** · 02-15-2016 03:19 PM

Coilovers?

**Seerlah** · 02-15-2016 03:26 PM

I still say pop the head before selling anything. But if you still want to prpceed, I'm interested in the rods.

**deucescorner** · 02-15-2016 03:44 PM

Originally Posted by GTRchop88

As time goes by and I remove more parts off the car I will have more individual pics. I will list the door blades when I take them off the car.

OK great. Pm me with the price when they are off

**ShogunR32** · 02-15-2016 04:18 PM

Originally Posted by my_audi_a4

Coilovers?

Yes but they are currently on the car. A lot of these parts are going to be too big/heavy for me to ship out.

**iamshayan** · 02-15-2016 04:42 PM

pm me details on said turbo setup. you have my interest.

**my_audi_a4** · 02-15-2016 10:02 PM

Inbox me the set up I can meet up in NY or so thing for the coilovers inbox me

**AutoMax** · 02-16-2016 11:30 AM

Have pictures of center console?

Sent from my SM-N910T using Tapatalk

**MurkyRivers_A4** · 02-16-2016 11:44 AM

Sent you a text. Thanks for getting back to me.

**ShogunR32** · 02-16-2016 12:39 PM

I have been getting a few offers for the complete car unparted so I will keep everyone updated.

**krew53** · 02-16-2016 12:51 PM

Damn.. Bummer to hear

**Clos274** · 02-17-2016 02:31 PM

How much for the usp bumper complete set?

**elpriebo** · 02-18-2016 09:53 PM

Interested in whole car if still selling?

**Schwebe** · 02-19-2016 06:42 AM

Is your exhaust setup turbo back?

**Mark2.0aba** · 02-19-2016 08:11 AM

How much for glove box lid?

**ShogunR32** · 02-19-2016 11:00 AM

Originally Posted by Schwebe

Is your exhaust setup turbo back?

It is turbo back with the 3" 034 downpipe for the spa manifold. Otherwise the maganflow setup in the back is cat back. There may be a local buyer already for it tho.

Originally Posted by Clos274

How much for the usp bumper complete set?

I only have the rear brilliant black USP rear bumper.

Originally Posted by Mark2.0aba

How much for glove box lid?

The glove box lid has one broken lever(repairable with ebay kits).

**B5_t** · 02-19-2016 12:30 PM

Interior cup holder if in good condition as well as trunk piece that holds lock and license plate lights ?

**Schwebe** · 02-19-2016 01:51 PM

How about air filter and intake?

**ShogunR32** · 02-19-2016 05:19 PM

Originally Posted by B5_t

Interior cup holder if in good condition as well as trunk piece that holds lock and license plate lights ?

Ill try and grab some pics this weekend.

Originally Posted by Schwebe

How about air filter and intake?

Air filter/intake setup is for a big turbo.

**cleoo** · 02-20-2016 06:55 PM

Do you have the lower center grill and fog grills?

**B6A4Dave** · 02-20-2016 11:44 PM

Garrett dbb 50 trim big turbo kit, included: turbo, lines, spa manifold and downpipe,38mm external wastegate, bosh 630cc injectors, tuned ecu, and new walbro 255 fuel pump(also have multiple tunes to include)- $1500obo

Shoot me a price for just "Garrett dbb 50 trim big turbo kit, included: turbo, lines, spa manifold and downpipe,38mm external wastegate" dont need Injectors, ECU or pump.

**Gardner** · 02-26-2016 09:33 AM

Fmic still for sale?

**ShogunR32** · 02-26-2016 03:04 PM

Originally Posted by Gardner

Fmic still for sale?

Yes it is still for sale.

**Pat_McGroin** · 02-26-2016 03:21 PM

Are the Brembo brakes off the car?

**dcampana** · 02-26-2016 04:36 PM

how about shortblock? very interested.

**ShogunR32** · 02-27-2016 04:13 PM

Fmic, apikol manifold and front bumper are off the car.

**Kelz** · 02-27-2016 08:47 PM

interested in bottom end and the intake manifold

**deucescorner** · 02-27-2016 10:50 PM

Pm me price for the full set of door blades

**B6A4Dave** · 02-28-2016 02:08 AM

More pics of FMIC?

Define "hardware" clamps? Couplers? etc.

Pics installed?

My piping is pissing me off with f**king boost leaks.

Lower hot side has the hole for the DV?

**dcampana** · 02-28-2016 09:26 AM

Short block price? Thanjs

**biketsai** · 02-28-2016 09:41 AM

Are headlights available?

**ShogunR32** · 02-28-2016 04:40 PM

Originally Posted by B6A4Dave

More pics of FMIC?

Define "hardware" clamps? Couplers? etc.

Pics installed?

My piping is pissing me off with f**king boost leaks.

Lower hot side has the hole for the DV?

3" garrett core, 2.5" stainless hot and cold side with dv relocated to the cold side. All hoses and clamps included.