Coil Conversion Cable Management

[treysgreen]

I am installing the plug and play coil conversion kit from 034 but I am running into issue with routing the cables around the fuel rail and intake so that there isnt a huge loop of cable hanging and it is not preventing the fuel rail or y pipe to sit properly. Anyone with the conversion kit installed willing to share how they ran the cables or upload some pictures. It would be much appreciated.


Trey G

[Samataras]

In for some pictures here... I hate the way mine sits

Sent from my SM-G920V using Tapatalk

[vavJETTAw36]

I have the rs6 coil conversion (bolt to valve cover directly just lock stock) for cable management I point the connector downwards and run it around and plug it in in stock location. The coils near the bi pipes have to be pointed upwards as the valve cover is raised for the turbo feed pipes. I had to tuck the wires underneath the fuel rail and bunch the adapter up. Kept it bunched with electrical tape.


Sent from my iPhone using Tapatalk

[a4kamila6]

Sent from my iPhone using Tapatalk

[a4kamila6]

Fits like a glove, just take your time


Sent from my iPhone using Tapatalk

[Samataras]

I got the ecs ones and the wiring harness is HUGE! I think I made a mistake getting theirs

Sent from my SM-G920V using Tapatalk