Engine Specs for 3.2 FSI needed

[O.G.]

Hello Guru's, I need help. My motor is shot and I want the engine breakdown. Here is what I do know

3.2 V6 FSI
Bore: 3.33 in (84.5mm) pistons
Stroke: 3.65 in (92.8mm) crank
12.5:1 compression

What I want to know is the connecting rod length and the block deck height. If there is a website I can find this info or any comments, please let me know.

Thanks

[swoboda84]

connecting rod 154 mm. Bolt 20mm.

[KUB]

my motor out of my Audi A4 8K is broken 3.2 FSi CALA
the crankshaft has honed in housing
a piston is broken.

What can i do ? A new Engine is to expansive.

[ryanhmusic]

my motor out of my Audi A4 8K is broken 3.2 FSi CALA
the crankshaft has honed in housing
a piston is broken.

What can i do ? A new Engine is to expansive.

There are only about a dozen members on here who own B7 3.2s -- that said, you'd be better off posting in the B7 section and the C6 section which shared the same motor.

I have a 3.2 but I'm not sure what you can do -- if there's no cylinder wall damage, I'd imagine you can rebuild but if there's wall damage I think you're out of luck -- no one builds these motors and they're impossible [from what I understand] to hone the walls on.

Used engine?

3.0TFSI swap time?