Can someone confirm tire size on this 20" wheel - Allroad content?

[S4V8]

Racking my brain over this tire/wheel thing. I just picked up my Allroad and the next step is coil's and 20x11 wheels. I have settled on the Rohana RC7 20x11 ET28 however, I need to be sure I get the right tire. I realize being low, I will have to go with a stretched tire - but I want to go with a minimal stretch if possible.

What tire is this Allroad running on his 20x11 wheels? Looks like 255...maybe 265?

[The Infiltrator]

This thread has a lot of info and might have what you're looking for.
http://www.audizine.com/forum/showth...ery-***/page73

Post #2851 & 2898, they might be able to help you.

[SReinholdsson]

Thats a friend of mine. :-)
20x11 with 285 tires.

[Bullmaker81]

It is my car. It will not work with et28. They must be et31-33 if it should work without you scrape down the plastic. I needed to grind down the inside of the plasticfenders so it didn't rub on et31. Then you need to grind more the center bolt to the drive shaft otherwise you will not get there the center caps to fit.
Tires is 285/25-20 Hankook 107

[The Infiltrator]

It is my car. It will not work with et28. They must be et31-33 if it should work without you scrape down the plastic. I needed to grind down the inside of the plasticfenders so it didn't rub on et31. Then you need to grind more the center bolt to the drive shaft otherwise you will not get there the center caps to fit.
Tires is 285/25-20 Hankook 107

285? DAMN. Lol

[Bullmaker81]

285? DAMN. Lol

Its perfect

[Bullmaker81]

[S4V8]

It is my car. It will not work with et28. They must be et31-33 if it should work without you scrape down the plastic. I needed to grind down the inside of the plasticfenders so it didn't rub on et31. Then you need to grind more the center bolt to the drive shaft otherwise you will not get there the center caps to fit.
Tires is 285/25-20 Hankook 107

Thanks for confirming!

Sounds like a lot of custom work involved...I don't want to do that. I thought the Rohana's in the RC7 20" wheel only came with a 28 offset? Did you get a custom set from them in 31 offset?

[Bullmaker81]

Thanks for confirming!

Sounds like a lot of custom work inviolved...I don't want to do that. I thought the Rohana's in the RC7 20" wheel only came with a 28 offset? Are your custom with 31?

They are custom. They are et28 from factory buy i made the old et31 and the new is et33.
It will not fit if you dont fix the things i wrote before

[S4V8]

They are custom. They are et28 from factory buy i made the old et31 and the new is et33.
It will not fit if you dont fix the things i wrote before

Thanks again. So at ET33 I still couldn't get a 275 tire under there and be as low as you, without making the modification you outlined...correct?

[Bullmaker81]

Thanks again. So at ET33 I still couldn't get a 275 tire under there and be as low as you, without making the modification you outlined...correct?

Correct. You will scrape like a mf in the plasticfenders. And if you dont grind down the center bolt to the driveshaft the center caps will not fit

[S4V8]

Correct. You will scrape like a mf in the plasticfenders. And if you dont grind down the center bolt to the driveshaft the center caps will not fit

Thank you...you have answered my questions and have made it even more clear that I cannot go with this set up.

Your car looks awesome though :-)

[Bullmaker81]

Thank you...you have answered my questions and have made it even more clear that I cannot go with this set up.

Your car looks awesome though :-)

No probs man

Thanks
Just ask if you have something more on your mind