Engine harness routing

[tHatOne guY]

Putting the AMB back in it's home after some work but kinda stumped on the harness routing. 04' B6 1.8t

Having a bit of trouble remembering where the harness snakes along on the driver's side under the intake manifold. Not exactly sure how it went and I didn't take pics of that part.

Any one have a few shots of how the harness is ran on the drivers side they could post up?

Specifically the portion under the intake manifold is where I'm a little fuzzy. Thanks.

[diagnosticator]

Go to the dealer and ask to look at a B6 A4 1.8T and take pics.

[KHARDa4]

Start with the alternator and work your way backwards. Simple and easy, things will only go where they can.

[tHatOne guY]

Got it figured out guys. Everything fell right into place after the throttle body connector was fitted. Thanks.

[old guy]

Got it figured out guys. Everything fell right into place after the throttle body connector was fitted. Thanks.

I'll leave this here just as a precaution: Clicky click®

Post #12 still has the pics up.

[tHatOne guY]

Good looking out OG, didn't make that mistake though as I had a pic of the top of the engine just didn't take any pics of anything under the intake manifold.