S3 Rear Spoiler Installed

**YegorS** · 02-06-2016 10:22 PM

Hey guys,

I was looking for alternative options to replace the rear spoiler. There are several available on the market, but they are either carbon fiber or black finish. I wanted something that wasn't outrageously big or shouting and definitely in body color. After hours and hours of research I found this: it looked decent enough in the low-res pictures, so I decided to buy one and thought if I don't like, I will just send it back and lose $100 or so on the shipping.

I bought the spoiler on eBay for $150 shipped. This is the primed version (I remember seeing someone installed one of these, but never was able to find the post again). Even though the seller provided more than a month delivery estimate, it arrived after about a week I placed the order. It was very well packaged and the quality seemed just fine. I took it to one of the bodyshops close to me and asked them to inspect everything and refinish if necessary and paint. They asked $200 which I think is reasonable. According to the shop, the primer wasn't well done and they had to re-prime it. Regardless, we installed it today and the end result is very good and the color is spot on. I really like it and all my friends liked, too.

The one I bought looks exactly like this.

Just sharing :)

EDIT: Added profile and direct-back photos.

**onequick4door** · 02-07-2016 06:03 AM

Looks good

**coolwater** · 02-07-2016 06:15 AM

Thanks for taking the plunge. Looks good. Car would look even more aggressive with a drop and spacers.

-cW

Sent from my SM-G900V using Tapatalk

**K2jer** · 02-07-2016 08:18 AM

That's cool. I really like it.

**JohnnyUtah787** · 02-07-2016 10:35 AM

I like it. Did you have to remove the original spoiler or did it install over it?

**atenzany62** · 02-07-2016 10:45 AM

that looks like great fitment, i'm planning to get the carbon version for my glacier white. seems like these s3 parts are good fit, i have the front lip in carbon and it fits great.

**JohnnyUtah787** · 02-07-2016 10:51 AM

Originally Posted by atenzany62

that looks like great fitment, i'm planning to get the carbon version for my glacier white. seems like these s3 parts are good fit, i have the front lip in carbon and it fits great.

Got any pics of the front lip? Where did you get it from? Cost?

**atenzany62** · 02-07-2016 11:05 AM

Originally Posted by JohnnyUtah787

Got any pics of the front lip? Where did you get it from? Cost?

sent you a pm lmk if you got it

**YegorS** · 02-07-2016 01:23 PM

Originally Posted by JohnnyUtah787

I like it. Did you have to remove the original spoiler or did it install over it?

Yes, the factory spoiler must come off, but it's very easy, they are also using 3M tape for mounting. I just wrapped it and stored in my garage, in case I return the car at the end of the lease, then I will swap them and sell this one.

**markn1689** · 02-07-2016 01:50 PM

call me a hater but i like the subtle stock lip more

**JohnnyUtah787** · 02-07-2016 02:30 PM

Originally Posted by markn1689

call me a hater but i like the subtle stock lip more

Hater

**949** · 02-07-2016 05:17 PM

how is the stock spoiler attached to the trunk?
when you remove it is there any sign like existing holes and such?

**JohnnyUtah787** · 02-07-2016 05:54 PM

Think OP answered above, 3M tape or similar. For what it's worth, I think I've seen that it's some sort of adhesive in another thread as well.

**roadrunner_oz** · 02-07-2016 06:03 PM

Spoilers are attached at factory either by DS tape or glue. Use a heat gun at low temp to warm up the factory spoiler, then start by slipping some floss or fishing line under the side edge. Once you have lifted an inch or so, replace the floss with a microfiber cloth between the spoiler and the lid, working it to and fro. Should come off easily. Make sure you remove all the old take and wipe down with IPA before attaching the new DS tape.

**YegorS** · 02-07-2016 07:47 PM

Originally Posted by roadrunner_oz

Spoilers are attached at factory either by DS tape or glue. Use a heat gun at low temp to warm up the factory spoiler, then start by slipping some floss or fishing line under the side edge. Once you have lifted an inch or so, replace the floss with a microfiber cloth between the spoiler and the lid, working it to and fro. Should come off easily. Make sure you remove all the old take and wipe down with IPA before attaching the new DS tape.

Roadrunner explained the removal perfectly, no holes on the lid, just DS tape. The original spoiler comes off without any deformation or anything.

**949** · 02-07-2016 10:34 PM

i wonder how the trunk looks without any spoiler.

**markn1689** · 02-08-2016 05:30 AM

Originally Posted by 949

i wonder how the trunk looks without any spoiler.

like an a3

**949** · 02-08-2016 07:39 AM

lol.

i didnt think about that. doh

**onequick4door** · 02-08-2016 07:48 AM

There is a version on Ebay by the same or similar vendors that is a solid radius vs. the notched version like the above which replicates the factory design. Was thinking about taking the plunge on that version and do some something similar in terms of getting it painted to match etc..

Could you (YegorS) post a pic from directly behind the car vs at an angle?

**YegorS** · 02-08-2016 09:10 PM

Originally Posted by onequick4door

Could you (YegorS) post a pic from directly behind the car vs at an angle?

I apologize, didn't have a chance today, will do it tomorrow.

**4Chio** · 02-08-2016 09:49 PM

Originally Posted by markn1689

call me a hater but i like the subtle stock lip more

second !!!! not a fan

**onequick4door** · 02-09-2016 07:20 AM

Originally Posted by YegorS

I apologize, didn't have a chance today, will do it tomorrow.

I appreciate it.

**m3brad** · 02-09-2016 09:25 AM

Looks great!! I've had mine on for a month or so and no regrets.

**DarkSideGTI** · 02-09-2016 09:42 AM

Originally Posted by onequick4door

There is a version on Ebay by the same or similar vendors that is a solid radius vs. the notched version like the above which replicates the factory design. Was thinking about taking the plunge on that version and do some something similar in terms of getting it painted to match etc..

Could you (YegorS) post a pic from directly behind the car vs at an angle?

It's not exactly a replica of the OE spoiler. They used an OE spoiler as a mold and in doing so, the lines of the notch are a bit softer than the OE. I kinda wish the transitions were as crisp as the OE. But I did only pay $250 for it so I can't complain too much.

**gamegenie** · 02-09-2016 10:51 AM

Originally Posted by 949

i wonder how the trunk looks without any spoiler.

Like this.

**YegorS** · 02-09-2016 11:40 AM

Originally Posted by m3brad

Looks great!! I've had mine on for a month or so and no regrets.

Yep, that was you, I was looking for the photo you posted, but never found the thread :)

**YegorS** · 02-09-2016 11:42 AM

Originally Posted by onequick4door

I appreciate it.

Just added two images taken early morning, the worst time of the day to take photos, but should work fine.

**949** · 02-09-2016 11:57 AM

Originally Posted by gamegenie

Like this.

thanks.
actually looks pretty clean. I'm in the "less is more" mentality.
the way the trunk still sticks out a little still gives the spoiler effect and that actually looks way better.

**YegorS** · 02-09-2016 01:07 PM

Originally Posted by gamegenie

Like this.

The lid without spoiler looks quite good. After removing the factory spoiler, I actually started debating within myself if I should install the larger spoiler at all. Then kind of preferred with the spoiler, it sets apart the car a little more. It's just a personal preference.