Engine swap compatibility

[onedumslack]

I'm looking at getting a used engine for building to swap with my existing. I currently have a bwt 2.0 manual transmission with quattro. From searching it looks like I can either use another bwt from a manual or a cvt. Is this correct? I've found a good low mileage cvt bwt engine that I read in another thread vce said I would just need a pilot bearing and then I'd be good.

[vce1232000]

You can even a VW FWD GTI-Audi A3 manual 2.0T. You would need to out the oil pan and oil pick up tube/screen.

[onedumslack]

You can even a VW FWD GTI-Audi A3 manual 2.0T. You would need to out the oil pan and oil pick up tube/screen.

Awesome, thank you. I'll search for those too.

[onedumslack]

Essentially I just need to stay away from a tiptronic then?

[vce1232000]

Yes. I dont know about the DSG GTI's 2.0T. I never one apart to see.

[onedumslack]

Thanks for you help vce1232000! I got a 2008 bwt cvt with 61,000 miles purchased and should be delivered soon.

[Lyubomir]

Yes. I dont know about the DSG GTI's 2.0T. I never one apart to see.

Not really. Titronics DO use different crank shape, but it CAN be done. I just did BTW crank to run with ZF tiptronic. If anybody interested let me know.

[ahotboy15]

i think its manual to auto/tip that you would need a bushing for the pilot bearing. since u have a manual im not sure what is required

here is thread about the custom bushing/sleeve to keep the torque converter centered eventhou vce didnt use one and has no problems except his does shake and his tranny might give out on him hahah

https://www.audizine.com/forum/showt...ighlight=turbo

[ahotboy15]

btw how much did you pay for working engine with shipping?

[Theiceman]

i think its manual to auto/tip that you would need a bushing for the pilot bearing. since u have a manual im not sure what is required

here is thread about the custom bushing/sleeve to keep the torque converter centered eventhou vce didnt use one and has no problems except his does shake and his tranny might give out on him hahah

https://www.audizine.com/forum/showt...ighlight=turbo

You are such an a-hole


Sent from my iPhone using Audizine

[a4lownslow]

You are such an a-hole


Sent from my iPhone using Audizine

He truly has no shame, what a loser.


Sent from my iPhone using Audizine

[ahotboy15]

still making a fuss over the k03 with forge DV!! hahhah

He truly has no shame, what a loser.


Sent from my iPhone using Audizine

[Theiceman]

still making a fuss over the k03 with forge DV!! hahhah

Ahotboy15
https://www.audizine.com/forum/showthread.php?t=812076


Sent from my iPhone using Audizine

[Theiceman]

btw how much did you pay for working engine with shipping?

Ahotboy15
https://www.audizine.com/forum/showthread.php?t=812076


Sent from my iPhone using Audizine

[Theiceman]

i think its manual to auto/tip that you would need a bushing for the pilot bearing. since u have a manual im not sure what is required

here is thread about the custom bushing/sleeve to keep the torque converter centered eventhou vce didnt use one and has no problems except his does shake and his tranny might give out on him hahah

https://www.audizine.com/forum/showt...ighlight=turbo

Ahotboy15
https://www.audizine.com/forum/showthread.php?t=812076


Sent from my iPhone using Audizine