18x9 et30 Fifteen52 Turbomacs w/ 245/40 Sumitomo HTR A/S P02 and/or 3x Blizzak LM60s

**Chuuey** · 02-05-2016 06:53 AM

18x9 et30 Fifteen52 Turbomacs with 245/40 Sumitomo HTR A/S P02 and/or 3x Blizzak LM60

Looking to sell my Fifteen52 Turbomacs. The intention was to use these as my winter tire for the colder months and move over to a new setup once it began to warm up.

Long story short, something got stuck in one of my LM60 winter tires and caused a flat while I was 3 hours from home on a Sunday; therefore, I needed to put something on to get home (the current all seasons).

.

As many in the Northeast know, winter hasn't been too rough and I have decided to put the stock 19" wheels back on for the remainder of the season and will be pursuing a new setup this summer.

The wheels were originally put on the car with the winter tires on 12/15/15 @ 100,380 miles. (I have 3x 245/40 Blizzak LM60 winter tires for sale $400)

The new tires were mounted on 1/10/2015 @ 101,789 miles.

The car currently has 103,228 miles and this will go up marginally as I drive the car daily.

The wheels are in great condition and the tires are essentially new. When the tires were mounted one wheel received a pinky-nail sized mark on the edge of the face from the mounting process. There are very minor marks which have been detailed in the attached pictures. I have dropped the price accordingly.

The wheels, tires, centercaps, and TPMS's are included.

Located in southern CT and looking for $1,200 for everything or $900 for the wheels only. I am willing to ship at buyers expense.

RS4_12 by chuuey13, on Flickr

RS4_10 by chuuey13, on Flickr

RS4_7 by chuuey13, on Flickr

RS4_6 by chuuey13, on Flickr

RS4_4 by chuuey13, on Flickr

RS4_2 by chuuey13, on Flickr

**Lambda13** · 02-05-2016 07:02 AM

If these are for an RS4 I don't think they will fit a B8. Nice car, GLWS.

**Chuuey** · 02-05-2016 07:53 AM

Originally Posted by Lambda13

If these are for an RS4 I don't think they will fit a B8. Nice car, GLWS.

ECS didn't seem to have an issue fitting their Alzor wheels with the same specs on a B8.5. Correct me if I am wrong, but I'm almost positive these will fit.

**Lambda13** · 02-05-2016 07:58 AM

I think the bore on the Alzor's is larger than the stock RS4. Do you know what size these are? If they are 57.1mm that the B7's take, our bore is 66.56mm, so they probably won't fit

.

**Chuuey** · 02-05-2016 07:59 AM

Originally Posted by Lambda13

I think the bore on the Alzor's is larger than the stock RS4. Do you know what size these are? If they are 57.1mm that the B7's take, our bore is 66.56mm, so they probably won't fit

.

The bore on these is 66.56. I used hub centric rings.

**Lambda13** · 02-05-2016 08:00 AM

Nice! Good to go then! lol

**Chuuey** · 02-12-2016 08:15 AM

BUMP,

I apologize for not getting more photos uploaded. The NE has been hit with some snow and VERY cold weather making the cleaning and picture taking impossible. I will have some early next week!